Auto Power Off··············· 17
Power management··················· 18
Basic Parameters··················· 19
Configuration Standard················· 21
Operating Environment and Announcements····· 22
PSHTCM88
1
2
1 2 3
4
567
89 1011
PSHTCM88
Introduction
【Name】 Digital Night Vision Viewer
【Model】 PSHTCM88
【Features】
● It is a night vision viewer which can be used to
observe objects in the dark and low light situation.
Two lighting modes are available to use. The
viewing distance in the low light environment will
be at infinity, 700 feet, viewing distance in the dark
environment.
● Easy to exchange data with other instruments,
having USB, AV OUT and DC IN sockets.
PSHTCM88
Operating Hints
● It can be used normally in the day or night, with
photo shooting, video shooting, playback and other
functions. 5X Optical Zoom and 8X digital Zoom.
● It is the best auxiliary tool of extending human’s
visual senses.
【Operating Hints】
● It is a night vision viewer which can be used to
observe objects in the dark and low light situation. Two
lighting modes are available to use.
● It is suitable to use in full dark environment.
● Turn the auxiliary light on to observe the objects
when it works in the dark situation. Adjusting the
brightness by the distance of the objects. CCD is utilized
in this viewer. If there is any light resource existing, the
auxiliary light cannot be turned on, please adjust the
focal distance only to get the sharp image of objects.
● Operating time: 1 hour under auxiliary light mode;
12 - Hand Grip Strap
13 - Up
14 - Down
15- Functions(for photos shooting, video shooting and
playback)
16 - Auxiliary Lighting/Brightness Adjustment
17 - POWER/FUNCTION
18 - Diopter Dial
4
6
【
【
【
【
【
【
Bri ght : 7
LAMP 0
03727
SD
12 3
4
03727
Bri ght : 7
POWL ED 0
L ED : OF F
PSHTCM88
Operating Instructions
Battery Installation】
● Turn the battery cover
down ; insert one battery
correctly
(note the negative electrodes face down) insert and turn
the cover back into position. Turn the viewer on, the
screen will light up if the battery is installed correctly.
Otherwise, please reinstall the battery again or tighten the
cover again.
Announcements】
Ensure the model of battery is correct;
Ensure the electric Volts and Amps match;
Pay attention to the anode and the cathode of the
battery.
PSHTCM88
Operating Instructions
Power On】
●Take the objective
cover down.
●Long press #19 for
3 seconds to light
screen up,observing
from Eyecup #11,if
the screen is lit up and icons have been shown
normally, the viewer could be used then
●The Observing (Photo Shooting) Mode is available
to use after the startup.
Power Off】
●In any mode, long press #17 for 3 seconds to turn
it off.
PSHTCM88
Operating Instructions
Scenery Observation】
●Take the objective cover down, observing the
screen from eyecup #11.
1. Adjust the diopter ring #10 until to get the sharp
images
2. Adjust the objective focusing wheel #2 to make the
images to be sharpest and easy to observe then.
●Automatic fine-tuning control of display brightness
could be operated by Viewer.
●Digital zoom could be realized by pressing #13
and #14 ranged at 1x to 8x.
● If the environment is light enough, turn the
auxiliary light off to save the power. On the
contrary, please turn the auxiliary light on to get
the sharpest image to observe
●Otherwise, please turn the auxiliary light on.
Announcements】
Don’t block the light resource.
7
PSHTCM88
Operating Instructions
【Brightness Adjustment】
In the observing mode,
press #16.
*
Enter the menu of
brightness adjustment. Just as the
screen showed, the number after
“Bright” means the current
brightness index.
Brightness Adjustment
SD
Press #15 to heighten the index and #16 to lower
it. 9 means the highest brightness of display. The index
ranged at 1 to 9, 9 means the brightest index.
【High Beam Adjustment】
In the observing mode, press
#16 twice to enter the high beam
adjustment menu.
*
The screen will be just as the
picture showed.
SD
The index of LAMP shows the
intensity of auxiliary light.
High Beam Adjustment
8
9
10
【
【
【
0027
SD
123
4
03727
SD
12 3
4
0027
SD
1
3
4
6
00: 02: 25
2012.02.02 09:12:22
VGA
2
5
7
8
PSHTCM88
Operating Instructions
Press UP #14, DOWN #15,the high beam will be
changed ranged at 0 to 9(9-highest, 0-off).
When the high beam function is opened, the menu
is exited, LAMP shows on the screen will be flickering.
PSHTCM88
Operating Instructions
Announcements】
On any mode above, the menu will disappear and
return to observing (photo shooting) mode if there is no
operation within 8 seconds.
Please turn the auxiliar y light off if you will not be
using it to save the battery.
PSHTCM88
Operating Instructions
Photo Shooting】
Enter the observing
mode automatically after
the viewer is turned on
and in this mode, you
can take the pictures of
the scenery.