PYLE Audio PSBV800 Owner's Manual

HOME ENTERTAINMENT SPEAKER
SYSTEM WITH FM RADIO, HD MEDIA
PLAYER AND WIRELESS REMOTE

4

3

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles and the point where they exit from the apparatus.

10. Unplug this apparatus during lightning storms or when unused for long period of time.

11. Power Source

The product should be operated only from the type of power source indicated on the rear of the

unit.

12. Overloading

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

13. Object and liquid entry

Never push objects of any kind into this product through as they may touch dangerous voltage

points or short out parts that could result in fire or electric shock.

Never spill or spray any type of liquid on the product.

14. Service

Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Entire wooden case, piano style painted front panel with blue backlight LCD display.
55 Watts RMS Output
FM stereo radio with automatic search and can store 30 stations for convenience.
Buit-in high definition media player which can play H.264,VC-1 RM, RMVB, MPEG1 (dat, mpg),
MPEG2(vob, mpg,ts), MPEG4 (avi, divx, xvid), mkv, iso, ifo movies,
MP3, WMA, AAC, OGG music and JPG/JPEG/BMP photos.
Two USB2.0 host and one SD/MMC connector for connecting external moving HDD, flash drive,
SD/MMC card
Wired LAN port to connect computer for network playing.
HDMI output supports up to 1920*1080p video output and excellent audio output.
Component video output and input
REC IN and video input for recording AV signal from DVD etc.
AUX, PC/MP3 audio inputs.
INPUT, MUTE, STANDBY, VOL+, VOL- buttons.
1x5.25" woofer, 5x3" full range speaker
Adopted SRS 3D technology for better sound.
With

remote control.

With stand and wall mount.
Unit dimensions: 8.3" H x 5.1" W x 44.1"L
Unit weight: 25lbs

FEATURES

ACCESSORIES

1 Set Stand

1PC HDMI Cable

1PC Remote Control

2PCS AAA batteries

1 Set Wall Plate

1PC FM Antenna

1PC 3.5mm mini plug

connection cable

Manual

STANDBY

MUTEINPUT

VOL-VOL+

Screw

Base
Aluminum Pipe

2.PLACE THE UNIT ON THE TABLE

1. Put the main unit upside down on a horizontal surface with soft cloth.

2. Insert the two aluminum pipes into the hole on the base of the unit. And then put base on the pipe.

3. Insert screws inside base hole and the pipe. Lock the screws.

To place the unit on the table, please install the stand as below.

SRS

Take advantage of SRS stereo technology, you can listen to surround sound without extra speakers.
Placing our system as follows, and turn on SRS effect by press the SRS Button on the remote control,
you will get the surround sound effects.

is a trademark of SRS Labs, Inc. SRS technology
is incorporated under license from SRS Labs, Inc.

SYSTEM INSTALLATION

1. PLACE THE UNIT

5 6

STANDBY

MUTE

INPUT

VOL- VOL+

44mm

800mm

44mm

800mm

Figure 1

Figure 2

Figure 3

Figure 4

1) Choose the position where you want to mount the sound bar. Mark as Figure 1 indicates.

2) Use a drill(7mm drill bit) to make holes according to the marks in figure 1.

3) Put the plastic anchors into the holes and screw the wall plate onto the wall.(NOTE: Verify the
fixing of wall plate in a proper way).

4) Aim the sound bar mount toward the wall plate to hang the sound bar on the wall.
(NOTE: Verify the mounting of sound bar to avoid an accident)

3. MOUNT THE UNIT ON THE WALL

If you want to mount the unit on the wall, please do not install stand.
Mount the unit on the wall as below.

7

8

Insert the power plug into a wall socket.
Make sure the voltage marked at the rear panel is same as your AC power
Do not operate with wet hands to avoid electric shock.

1. CONNECT POWER SUPPLY

2. CONNECT WITH PC/MP3

To listen the sound source from PC (Computer) or MP3 Players, connect the unit with the external
device as below:

SYSTEM CONNECTION

3. CONNECT WITH DVD/TV

To listen the sound source from Television and/or CD/VCR/DVD/DVR
Players, connect the unit with the external device as below.
This unit has also video in and video out. It can transfer your DVD video to TV. See below for connection.

VIDEO IN

VIDEO OUT

AUDIO IN

REC IN

VIDEO OUT

AUDIO OUT

TV

AUDIO OUT

Socket

Power plug

3.5mm mini plug
connection cable

OR

PC

MP3