USER’S MANUAL
PPHP121 PPHP151
PPHP120A PPHP150A
PPHP123M PPHP153M
www.pyleaudio.com
Before using your new Speaker System Please review the
following instructions, for the safety and investment.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum
level. On the contrary the system could damage
1. - Plug the power cable to the Ac outlet and to the system and to the speaker
2. - Plug the Microphone in the “MIC” input
3.- Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input
4.- Turn on the systems. A green LED will light up to indicate the speaker is on
5.- Set the volume on the low level on the MIC and the LINE IN input
6.- Increase the master volume (place on the right side of LINE OUT* connector)
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED will light up when the system detects overload power. You will must decrease
the volume.
CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will
damage the system
EXTRA FUNCTIONS
6.3 and canon connectors marked as LINE OUT can handle an amplifier or even another
powered speaker cabinet ,in cascade. On the bottom of the speaker there is a hole to place
a stand.
1
FEATURES:
PPHP121: 12” 800 Watt 2 Way Plastic Molded Speaker Cabinet
·12'' Woofer
· 1.4'' Titanium Comp ression Driver
· 1 /4” and Speakon Jacks input
· Frequency response: 50-20 KHz
· Power: 800 Watts
· Impedance: 8 ohm
· Crossover Frequency: 3. 5K Hz
· 35mm Speaker Stand Mount
·Dimensions: W16.6” x D12.8” x H 23.5”
PPHP120A: 12” 800 Watt Powered 2 Way Plastic Molded Speaker Cabinet
·12" Woo fer
·1.4" Titanium Compression Driver
·XLR and 1/4" Mic Inputs
· XLR Stereo RCA Line Input
· XLR and 1/4" Line Outputs
· Master Volume, Bass Treble Controls
· Frequency response: 50-20 KHz
· Power Output: 800 Watts
· Crossover Frequency: 3. 5K Hz
· 35mm Speaker Stand Mount
· 110/220 Voltage Selectable
· Dimensions: W16.6” x D12.8” x H 23.5”
PPHP123M: 12” 800 Watt Powered 2 Way Plastic Molded Speaker Cabinet w/Built in
MP3
· 12" Woofer
· 1.4" Titanium Compression Driver
· USB Terminal
· MP3 control with LCD display
· XLR and 1/4" Mic Inputs
· XLR Stereo RCA Line Input
· XLR and 1/4" Line Outputs
· Master Volume, Bass Treble Controls
· Frequency response: 50-20 KHz
· Power Output: 800 Watts
· Crossover Frequency: 3. 5K Hz
· 35mm Speaker Stand Mount
· 110/220 Voltage Selectable
· Dimensio ns: W16.6” x D12.8” x H 23.5”
2
PPHP151: 15” 1200 Watt 2 Way Plastic Molded Speaker Cabinet
·15'' Woofer
·1.75'' Titanium Comp ress ion Driver
·1/4'' and Speakon Jac ks input
· Frequency response: 40-22 KHz
· Power: 1200 Watts
· Impedance: 8 ohm
· Crossover Frequency: 3.5K Hz
· 35mm Speaker Stand Mount
· Dimensions: W18.3” x D15.8” x H 27.2”
PPHP150A: 15” 1200 Watt Powered 2 Way Plastic Molded Speaker Cabinet
· 15" Woofer
· 1.7" Titanium Co m p r e ssion Driver
· Dual XLR and 1/4" Mic Inputs
· XLR Stereo RCA Line Input
· XLR and 1/4" Line Outputs
· Master Volume, Bass Treble Controls
· Frequency response: 40-22 KHz
· Power Output: 1200 Watts
· Crossover Frequency: 3.5K Hz
· 35mm Speaker Stand Mount
· 1 10/220 Voltage Selectable
· Dimensions: W18.3” x D15.8” x H 27.2”
PPHP153M: 15” 1200 Watt Powered 2 Way Plastic Molded Speaker Cabinet w/Built in
MP3
· 15" Woofer
· 1.7" Titanium Compression Driver
· USB Terminal
· MP3 control with LCD display
· XLR and 1/4" Mic Inputs
· XLR Stereo RCA Line Input
· XLR and 1/4" Line Outputs
· Master Volume, Bass Treble Controls
· Frequency response: 40-22 KHz
· Power Output: 1200 Watts
· Crossover Frequency: 3.5K Hz
· 35mm Speaker Stand Mount
· 1 10/220 Voltage Selectable
· Dimensions: W18.3” x D15.8” x H 27.2”
3
CONTROLS
1a) Microphone 1 input
Allows you to connect a microphone with a 6,3mm connector
1b) Balanced microphone 1 input
Connector for a balanced microphone
1c) Microphone control
Is Used control to set the volume level of the microphone 1
(6,3mm or balanced)
2a) Microphone 1 input
Allows you to connect a microphone with a 6,3mm connector
2b) Balanced microphone 1 input
Connector for a balanced microphone
2c) Microphone control
Use this control to set the volume level of the microphone 1
(6,3mm or balanced)
3a) RCA Line-In
Allows you to connect an external audio device (CD, radio, DVD, etc.), with RCA connectors.
3b) Cannon Line-In
Allows you to connect an external audio device (CD, radio, DVD, etc.), with a Cannon
connector.
3c) Control
Use this control to set the volume level of the Line-In signal
4) Volume control
Set the volume level
5 Treble
Use it to set the treble level
6) Bass
Use it to set the bass level
7a) Signal output
Use this jack to connect another amplifier or even another powered speaker cabinet in
cascade, using a 6,3mm connector
7b) Signal output
Use this jack to connect other amplifier or even another powered speaker cabinet in cascade,
using a Cannon connector
8) AC 110/220 Voltage Selectable
9) AC power
to connect th e AC power c o r d
4
10) On/ off power switch
Press to power on /off the speaker box
11a) Button
Use it to power On/Off MP3 player controller
11b) USB connector
Use it to plug in a USB device with MP3 file.
11c) MP3 control
Use this control to set the volume level of the MP3.
12) MP3 player controller
13)1/4” jack self-lock
14) speakon jack
PPHP123M/PPHP153M BACK VIEW PPHP121/PPHP151 BACK VIEW
5
PPHP150A BACK VIEW PPHP120A BACK VIEW
6
Electrical Safety
All products are fitted with a detachable power cord (supplied) which connects to the AC
Mains and the back panel of the loudspeaker. The power cord has an IEC female connector on
One end and a male mains connector on the other end. This cord is supplied specifically to
Accommodate the different worldwide safety and electrical code requirements. Th e power cord
Supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding
Plug. Like any electrical appliance, your EON powered speakers should not be used in water or
When wet.
Product design and specifications are subject to change without
previous notice.
7
Loading...