PYLE Audio PLTK200 Owner's Manual

OWNER

’’

S MANUAL

TV TUNER / DIVERSITY UNIT

Any changes or modifications in construction of this
device which is not expressly approved by the party
responsible for compliance could void the user’’s
authority to operate the equipment.

NOTES (MJC-110R ONLY)

When the TV tuner box is connected to AV4 (TV) input of the monitor unit,

To select the color system for your TV,

1. Select the color system (PAL or NTSC) at PICTURE menu on RADIO mode first.
(For more information on PICTURE menu, see page 23 of owner’s manual for the
monitor unit)

2. Select color system again on FUNCTION menu on AV4 (TV) mode.
(For more information on FUNCTION menu, see page 4.)

Select the desired mode by pressing the MODE button.
Each time you press the MODE button, the mode is selected as follows.

RADIO -> AV1 -> AV2 -> AV3 (CD/VCD changer) -> AV4 (TV)

1. When AV sources are connected to AV1,2 or 3 input of the monitor unit, they
must be controlled on the AV mode that they are connected to.

2. Turn power off on radio or AV1 or AV2 orAV3 mode only. Do not turn power off on AV4
(TV) mode.

1

TO SELECT COLOR & SOUND SYSTEM

TO CHANGE TV MODE TO RADIO MODE OR AV
SOURCES CONNECTED TO MONITOR UNIT

NOTE

1. Select AV4 (TV) mode first by pressing the MODE button.

2. Press the MENU button. The monitor shows following FUNCTION menu.

2

3. Press the SEARCH UP/DOWN button to select the desired item.

4. Press the CH UP/DOWN button to control the selected item.

5. To remove OSD (On Screen Display), press the MENU button again.

FUNCTION

FIELD DEFINE CCIR1
COLOR SYSTEM PAL
SOUND SYSTEM BG

SELECT:SEARCH󳦍󳦎 ADJUST :CH 󳦍󳦎

TO CONTROL TV TUNER BOX

NOTE

1. The OSD automatically disappears in about 10 seconds after it appears on the screen.

2. When MENU button is pressed on TV(AV4) mode, the screen shows only FUNCTION
menu. The items on USER SELECTOR or PICTURE menu must be controlled on radio
or AV mode (MJC-110R).

3. FM TRANSMISSION ON/OFF and FM FREQ. are options in factory mode
(MJC-110R/MJC-120R).

MJC-110R

1. Press the MENU button, The monitor shows following FUNCTION menu.

2. Press the SEARCH UP/DOWN button to select the desired item.

3. Press the CH UP/DOWN button to control the selected item.

4. To remove OSD (On Screen Display), press the MENU button again.

FUNCTION
MONITOR INPUT TV
FIELD DEFINE CCIR1
COLOR SYSTEM PAL
SOUND SYSTEM BG
FM TRANS. ON
FM FREQ. 89.5MHz

SELECT:SEARCH󳦍󳦎 ADJUST :CH 󳦍󳦎

MJC-120R

This is to select the color system ( NTSC / PAL / SECAM ) for TV and sound system
( M / BG / DK / I / L ) for your TV.

3

FUNCTION

FUNCTION

FIELD DEFINE CCIR1
COLOR SYSTEM PAL
SOUND SYSTEM BG

SELECT:SEARCH󳦍󳦎 ADJUST :CH 󳦍󳦎

ON AV4 (TV) MODE (MJC-110R ONLY)

This is to select what field is for your country.

1. Press the MODE button repeatedly until TV (AV4) mode is selected.

2. Press the SEARCH UP/DOWN button to select FIELD DEFINE.

3. When the cursor is pointing to FIELD DEFINE, press the CH UP/DOWN
button to select the field that your country belongs to.
Each time you press the CH UP/DOWN button, the field is selected as follows.

NTSC -> CCIR1 -> CCIR2 -> FRANCE -> U.K/IRELAND -> CHINA -> OIRT

* See page 6 to find to what field your country belongs to.

FIELD DEFINE

This is to select TV mode or external Aux. Mode

1. Press the SEARCH UP/DOWN button to select MONITOR INPUT.

2. When the cursor is pointing to MONITOR INPUT.
Press the CH UP/DOWN button to select the video source.
Each time you press the CH UP/DOWN button, the source is selected as follows.

TV --> AV1 --> AV2

MONITOR INPUT (MJC-120R ONLY)

1. Press the MODE button repeatedly until TV (AV4) mode is selected.
Each time the MODE button is pressed, the mode is selected as follows.
RADIO --> AV1 --> AV2 --> AV3 (CD/VCD changer) --> AV4 (TV)

2. Press the MENU button to select FUNCTION menu.
The monitor shows following picture.