PYLE Audio PLINV3, PLINV2, PLINV1 User Manual

PINV1
PINV2
PINV3

OWNER’S MANUAL

POWER INVERTER

PINV1 150WATT
PINV2 300WATT
PINV3 400WATT

www.pyleaudio.com

INTRODUCTION

Thank you for purchasing the PYLE View DC to AC Power Inverter. The PINV1/PINV2/PINV3 will deliver an
efficient power to a wide variety of household AC products or electronic appliance reliably from the 12 volt
outlet in your vehicle or boat, or directly from a 12 Volt battery to serve such as most TVs, VCRs, Play
Stations, Work Lights, Soldering Irons, etc.

Please pay your special attention to all CAUTION and WARNING statements. Improper use of this inverter
can cause personnel injury, property damage, and or loss of life.

-WARNING

• Shock Hazard. Keep away from children.

• The PINV1 / PINV2 / PINV3 Generates the same potentially lethal AC power as normal household wall
outlet. Treat it with the same respect that you would do to any AC outlet.

• The PINVI / PINV2 / PINV3 is designed for indoor use only and not recommended for use with inductive
loads, such as florescent lamps, compressors & pumps.

• Ensure to maintain at least 2-inch (5cm) air space on all sides of this inverter, as its housing may become
uncomfortably warm, reaching 140˚F (60˚C) under extended high power.

• Disconnect power to the inverter when it is not in use.

• Do not expose this inverter to water, rain, snow or spray.

• Do not insert foreign objects into this inverter's AC outlets.

• Do not leave this inverter or any device operating unattended, to avoid property damage potentially.

• Do not use or place this inverter near flammable materials or any places, which accumulate flammable
fumes.

• Do not connect this inverter to power utility AC distribution wiring under any circumstance.

• Check the input and output connectors of this inverter are tight regularly. The loose connections can
generate harmful heat and/of damage the inverter or power source.

-CAUTION

• Do not connect any AC product to this inverter, whose neutral conductor is connected to ground.

• Do not expose this inverter to temperature in excess of 100˚F (40˚C).

• This inverter must be connected only to batteries with a normal output voltage of 12 Volts. This unit will not
operate from a 6-Volt battery and will be damaged if it is connected to a 24-Volt battery.

1

FEATURES

PINV1

1. AC OUTLET

2. ON/OFF SWITCH

3. POWER ON LED

4. PROTECTION LED

5. LIGHTER PLUG

PINV2 / PINV3

1. AC OUTLET

2. ON/OFF SWITCH

3. POWER ON LED

4. PROTECTION LED

5. BINDING POST TERMINAL

2