123
456
789
0
PLDVD-150
OWNER’S MANUAL
Mobile Video System
• Vacuum Fluorescent Display
•
Multi-subtitle and Multi-audio Soundtrack Languages Function
• Multi-angle Function
• Parental Control
FEATURES
Compatible with PAL DVD (Video CD)
and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
• L/R stereo analog audio outputs (RCA)
for connection to existing head unit
aux inputs. Video output is composite
video (RCA).
• Supplied remote handles
multi-function software (multi-language
audio-track/subtitle, multi-angle), plus
all basic functions.
USE THIS PRODUCT SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30°.
DOLBY DIGITAL
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Confidential Unpublished Works.
©1992-1997 Dolby Laboratories, Inc.
All rights reserved.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
2
CONTENTS
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
Installation .....................................................................................................6
DIN Front-Mount (Method A) ..................................................................................6
DIN Rear-Mount (Method B)...................................................................................7
Using the Detachable Front Panel ..............................................................8
Electric Connection ......................................................................................9
Remote Control...........................................................................................10
Preparing the Remote Control..............................................................................11
Loading a DVD/VCD/CD Disc...............................................................................11
Ejecting a Disc ......................................................................................................11
Basic Operation ..........................................................................................12
On-Screen Display Function.................................................................................13
Multi-audio Function.............................................................................................13
Menu Function......................................................................................................13
Subtitle Language Function (For DVD only)..........................................................13
Multi-angle Function (For DVD only).....................................................................14
MP3 Disc Play.......................................................................................................14
Extra Function Control..........................................................................................15
Setup ............................................................................................................16
Initial Setup ...........................................................................................................16
General Setup.......................................................................................................16
Speaker Setup ......................................................................................................18
Dolby Digital Setup ...............................................................................................18
Preference Page ...................................................................................................19
Specifications..............................................................................................22
3
SAFETY INFORMATION
CAUTION:
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
The Region number for this product is
“1”.
CE Mark:
This mark signifies that the product
conforms to all applicable requirements
of the European Community.
A Declaration of Conformance is
included with the user information that
describes the specifications used to
demonstrate conformity.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
DISC NOTES
Disc formats supported by this player
DVD
E
D
I
V
12 cm disc/8 cm disc
O
(Single-sided disc only)
Video CD
12 cm disc/8 cm disc
CD
12 cm disc/8 cm disc
Discs which cannot be played with this
player
• DVD-ROM
• DVD-R/DVD-RAM
• CD-ROM
• CDV
• CD-G
• Photo CD
• DVDs with a Region number other than
“2” and “ALL”
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
•
Do not place discs in the following places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it unusable)
depending on your handle it and
conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Label side up
Do not touch
the underside
of the disc
Do not bend
Wipe the disc from center
toward the outside edge
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Rough spots on
outside edge
Ball point pen
or pencil
Rough spots
on inside edge
5
INSTALLATION
Notes:
• Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
• Before finally installing the unit,
connect the wiring temporarily and
make sure it is all connected up
properly and the unit and the system
work properly.
• Use only the parts included with the
unit to ensure proper installation.
The use of unauthorized parts can
cause malfunctions.
• Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
• Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
• If installation angle exceeds 30˚ from
horizontal, the unit might not give its
optimum performance.
DIN FRONT-MOUNT (Method A)
Installing the unit
1
182
53
(Fig. 1)
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Screw
1
2
3
6
30˚
• Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either
from “Front” (conventional DIN Frontmount) or “Rear” (DIN Rear-mount
installation, utilizing threaded screw holes
at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
2
3
7
4
(Fig. 2)
5
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5 x 25mm)
5. Screw
6. Strap
Be sure to use the strap to secure the
back of the unit in place. The strap
can be bent by hand to the desired
angle.
7. Plain washer
6
INSTALLATION
Removing the unit
1
2
3
1. Frame
2. Insert fingers into the groove in the
front of frame and pull out to remove
the frame. (When reattaching the
frame, point the side with a groove
downwards and attach it.)
3. Lever
Insert the levers supplied with the unit
into the grooves at both sides of the
unit as shown in figure until they click.
Pulling the levers makes it possible to
remove the unit from the dashboard.
DIN REAR-MOUNT (Method B)
Installation using the screw holes on the
sides of the unit.
1
Fastening the unit to the factory radio
mounting bracket.
1. Select a position where the screw
holes of the bracket and the screw
holes of the main unit become aligned
(are fitted), and tighten the screws at
2 places on each side.
Use either truss screws (5 x 5mm) or
flush surface screw (4 x 5mm),
depending on the shape of the screw
holes in the bracket.
2. Screw
3. Factory radio mounting bracket
4. Dashboard or Console
5. Hook (Remove this part)
Note: The mounting box, outer trim ring,
and half-sleeve are not used for method
B installation.
2
4
3
2
5
5
7
USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the open button (OPEN), then
the front panel will be folded down.
Open
2. Remove the front panel by pulling its
middle-hand outward.
Front Panel
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Protective Case
To Reinstall the Front Panel
1. Push the front panel into the main
body. A ‘click’ sound should be
heard.
2. Note that if the front panel fails to lock
in position properly, press control
button may not function and LCD
display may be missing some
segments. Pressing the OPEN button
and then reinstall the front panel
again.
Precautions when Handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when detaching or
reinstalling the front panel.
Front Panel
4. Push the front metal plate into the
main body. A ‘click’ sound should be
heard.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight in
anywhere.
6. Keep away any volatile agents (e.g.
benzene, thinner, or insecticides) from
touching the surface of the front panel.
7. Do not attempt to disassemble the
front panel.
8
ELECTRIC CONNECTION
Digital Output
OUT IN
DVD MAIN UNIT
(VIEW FROM REAR)
SPDF
(To link)
IR
AV OUT
WHITE
RED
AUDIO-L AUDIO-R VIDEO AUDIO-L AUDIO-R VIDEO
YELLOW
WHITE
AV IN
RED
YELLOW
YELLOW
EXTERNAL REMOTE RECEIVER
MEMORY BACK-UP
TO POWER SUPPLY
9
BLACK
RED
GROUND (B–)
IGNITION SWITCH (B+)
REMOTE CONTROL
1
10
123
2
456
789
3
0
4
6 5
7
8
9
1. POWER Press POWER to turn the unit ON or OFF
2. 0 - 9 Numeric Key buttons
3. ILL Choose the VFD Display brightness level
4. Press it to stop playback
5. / Press to start forward rapidly & to reverse rapidly
6. / Press to skip to the next track & press to skip back one track
7. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language DVD
8. SETUP Display the SETUP menu
9. TITLE Display the TITLE menu that is stored in DVD disc
10. DISPLAY Display statistical disc information during playback
11. REPEAT Switch the Repeat mode, following by REPEAT, REPEAT 1 and
12.
13. AV Switch between the DVD player and the external AUDIO/VIDEO
14. ENTER Confirm the Track/Chapter selected with the number key or selected
15. AUDIO
16. ANGLE Changing of the view angle on multi-angle DVD disc
17. MENU Display the root menu that is stored on the DVD disc
Note: / , DISPLAY, ANGLE are also assigned as special function keys,
please refer to “Extra Function Control”.
In case of MENU mode, those buttons served as cursor buttons
disc
REPEAT OFF
Press once to PAUSE a play, press again to resume continuous playback
with the cursor buttons on TV screen
Changing of the AUDIO soundtrack on multi-audio soundtrack DVD disc
11
12
13
14
15
16
17
10
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal reciver).
Operation angle: About ± 30 degree in
each the direction of the front of the IR
mark.
To prevent damage to the unit, be sure
to follow the connection diagram
(page 9).
Loading a DVD/VCD/CD Disc
1. Turn the ignition on the the accessory
position.
2. Press the POWER button (1).
3. Press the OPEN button (2), the front
panel will fold down slowly.
4. Insert the disc with printed side facing
up.
5. The player starts playback
automatically.
Ejecting a Disc
• Press the OPEN button (2).
• Let the panel fully fold down, then
press (8) to eject.
• Remove the disc and close back the
front panel.
5 768
(1) Power Button
(2) Open Button
(3) Remote Sensor
(4) VFD Display
(5) Disc Slot
(6) Flash LED
(7) Reset Button
(8) Eject Button
342 1
11
BASIC OPERATION
Stopping Play
- Brief press the STOP button to stop
the unit playback, when press the
PLAY button it can continuous normal
playback.
- Press STOP button twice, it will stop
the playback and go back to initial
Track/Chapter.
Rapid Forward/Rapid Reverse
Press FF & REW during play.
Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follow.
DVD/VCD/CD/MP3
Normal Playback 2X 4X 6X 8X
Skipping Track
Press SKIP / during playback.
Press to skip to next track, and to
back one track.
Note: For some VCD 2.0 dics
(PBC-playback control), / buttons
may be unavailable.
Pause (still picture)
Press during playback.
Return to normal playback.
Press once again.
Repeat
Press the REPEAT button to select repeat
mode as follow.
REPEAT 1 REPEAT REPEAT OFF
VCD
REPEAT feature not support VCD 2.0
(with PBC).
Illumination (ILL)
Press ILL to adjust the light of the VFD
display in the following order.
Brightness Level
4321
Choose higher brightness level will
increase the VFD lighting.
Reset
Reset button is placed on the housing
and must be activated with either a ball
point pen or thin metal object. The reset
button is th be activated for the following
reasons:
- Initial installation of the unit when all
wiring is completed.
-
All the function buttons do not operate.
- Error symbol on the display.
Open
Press OPEN to fold down the front panel.
Remote Sensor (IR)
Point the remote handset to the remote
sensor. Receive the signal from remote
handset.
Flash LED
If the front panel do not install in the main
unit, the LED will be flashing.
DVD/CD DISC
1. Continuously repeat at the current
chapter/track, when selected REPEAT
1 mode.
2. Select REPEAT mode to continuously
repeat all chapter/track on the current
disc.
3. When the player finish playback the
current discc last chapter/track, it will
stop display the elapsed time. When
selected REPEAT OFF mode (REPEAT
& REPEAT disappear at VFD display).
Tuning the player off
Press the POWER button in front of panel
or press on remote control.
12
BASIC OPERATION
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
DVD
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the fluorescent display,
along with the elapsed time.
(2) Press DISPLAY for the second time:
TITLE REMAIN
01:46:58
(3) Press DISPLAY for the third time:
CHAPTER ELAPSED
00:00:24
(4) Press DISPLAY for the fourth time:
CHAPTER REMAIN
00:01:39
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
Video CD/SVCD/CD
Each time DISPLAY is pressed, the
message displayed on screen changes
in the following order:
SINGLE ELAPSED SINGLE REMAIN
TOTAL ELAPSED TOTAL REMAIN OFF
MP3
Each time DISPLAY is pressed, the
message displayed on screen changes
as follows:
CHAPTER ELAPSED CHAPTER REMAIN
Multi-audio Function
For DVD
Press AUDIO during playback.
Each time the button is pressed, number
of the audio soundtrack language
changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
soundtrack are recorded will be
display at screen left top corner.
For VCD
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
Stereo (L & R) L only R only
MENU Function
TITLE Menu
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
1. Press TITLE during playback.
The title menu is display.
2. Press the cursor button show in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
SUBTITLE Language Function
(For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed, number
of the subtitle language changes in
sequential order.
Notes:
- The language number is different
according to the disc.
13
BASIC OPERATION
- Some discs only contain one laguage
soundtrack.
- When no different language
soundtrack are recorded will be
display at screen left top corner.
Multi-ANGLE Function
(For DVD only)
Press ANGLE during playback.
Each time the button is pressed, number
of the angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only work for discs
having scenes recorded at different
angles.
- When no different angle are recorded
will be display at screen left top
corner.
MP3 Disc Play
This player support the following MP3
CD format:
1. Joliet
2. Romeo
3. ISO9660
MP3 disc is playing as the format of
FOLDER.
For example:
SMART NAVI
ROOT ROOT 0
MP3 MUSIC 1
SKY
MP3 HEAR YOUR
REPEAT MODE
Use to select the item or
folder, then press ENTER or PLAY button.
Pressing REPEAT button repeatedly can
select three kinds of play mode.
REP-ONE:
Play the same song over and over again.
FOLDER REPEAT:
Play all songs in the current directory in
sequence, over and over again.
NO REPEAT:
Play all songs in the current directory
once.
In the playback, use to skip an item
ahead or back.
: Rapid reverse, : Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
<STOP> pressed.
NO REPEAT
14
BASIC OPERATION
Extra Function Control
The volume, colour, contrast and
brightness can be adjusted in “STOP”
mode.
ANGLE : Select the volume, colour,
DISPLAY : Recover to the normal value
Notes:
1. For MP3 disc, the above modes
cannot be adjusted.
2. When the sum of the contrast value
and brightness value is 29, it is
prohibited increasing.
3. Do not adjust the contrast and
brightness level too high.
AV switch
It is used to switch between the DVD
player and external AUDIO/VIDEO.
Please connect the external AV line to
the AV input terminal of the DVD player.
Then press AV button to switch to the
external AV. Pressing AV again will return
to the AV of the DVD unit.
Notes:
1. When switched to external AV, insert
the disc into the player. After the disc
identification it enters to play, and it
will automatically switch to AV output
of the DVD unit.
2. When you switch to external AV during
play, it will stop playing.
When switched to the AV of the DVD
player, it will play automatically.
contrast and brightness
: Decrease the level
: Increase the level
(except volume)
15
SETUP
INITIAL SETUP
SET UP --- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCE
EXIT SETUP
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player under STOP mode.)
2. The initial SETUP menu is displayed.
3. Select the preferred item by using the
/ buttons.
4. Press ENTER buttons.
a. GENERAL SETUP
This setup page includes all the
item of TV display & audio output
feature. The detail please refer to
GENERAL SETUP MENU.
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
c. DOLBY DIGITAL SETUP
This setup page includes all the
items for DOLBY DIGITAL.
Please refer to DOLBY DIGITAL
SETUP MENU.
d. PREFERENCE SETUP
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCE SETUP MENU.
GENERAL SETUP
SET UP --- GENERAL SETUP
TV DISPLAY
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
SPDIF
CAPTIONS
MAIN PAGE
Video Material
4:3
16:9
Normal
TV display setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
conected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
NORMAL/PS
NORMAL/LB
WIDE
TV Screen
4:3 Wide (16:9)
Pan Scan Letter-box
16
SETUP
SET UP --- GENERAL SETUP
TV DISPLAY
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
SPDIF
CAPTIONS
MAIN PAGE
TV type setup
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you connected
to PAL TV.
Select MULTI format, the player TV
output format will according to the DVD
disc format.
SET UP --- GENERAL SETUP
TV DISPLAY
MULTI
NTSC
PAL
SET UP --- GENERAL SETUP
TV DISPLAY
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
SPDIF
CAPTIONS
MAIN PAGE
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVD disc is playing, (the angle mark)
will appears on the screen; if is set to
OFF, the mark will not appear.
SET UP --- GENERAL SETUP
TV DISPLAY
ON
OFF
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
SPDIF
CAPTIONS
MAIN PAGE
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on format on
image or picture under noise affect.
AUTO
HI-RES
N-FLICKER
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
SPDIF
CAPTIONS
MAIN PAGE
OSD LANG type setup
Select the preferred OSD language by
using the / buttons.
17
ENGLISH
CHINESE
SETUP
SET UP --- GENERAL SETUP
TV DISPLAY
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
SPDIF
CAPTIONS
MAIN PAGE
SPDIF
Select the SPDIF optical output ON/OFF.
SET UP --- GENERAL SETUP
TV DISPLAY
TV TYPE
PIC MODE
ANGLE MARK
OSD LANG
OFF
ON
SPEAKER SETUP
SET UP --- SPEAKER SETUP
DOWNMIX
MAIN PAGE
This is to activate the audio output from DOLBY
AC3 5.1 DOWNMIX to 2 channel mode.
Select the preferred SPEAKER
connection by using the cursor buttons.
• Select the LT/RT to activate the Dolby
surround compatible output.
• Select the STEREO to activate simple
stereo mode.
LT/RT
STEREO
DOLBY DIGITAL SETUP
SET UP --- DOLBY DIGITAL SETUP
OP MODE
DUAL MONO
DRC
LINE MODE
SPDIF
CAPTIONS
MAIN PAGE
CAPTION
Activate the CAPTIONS feature by
selecting ON. And release this feature
by selecting OFF.
ON
OFF
OP MODE
Only one operating mode for the Dolby
Digital decoder: LINE OUT.
18
SETUP
SET UP --- DOLBY DIGITAL SETUP
OP MODE
DUAL MONO
DRC
DUAL MONO
The Dual mono reproduction only process for
Dolby Digital program with 1+1 Audio code mode.
• Stereo-reproduce 1+1 program CH1
for left channel, CH2 for right channel.
• CH1 Mono-reproduce CH1 channel in
both Left/Right output.
• CH2 Mono-reproduce CH2 channel in
both Left/Right output.
• Mix Mono-reproduce CH1+CH2 in
both Left/Right output.
SET UP --- DOLBY DIGITAL SETUP
STEREO
CH1-MONO
CH2-MONO
MIX-MONO
PREFERENCE PAGE
SET UP --- PREFERENCE PAGE
LANGUAGE
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
SET UP --- PREFERENCE PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OP MODE
DUAL MONO
DRC
DRC-Dynamic Range Control
Select DRC and adjust the dynamic range of a
Dobly Digital encoded program. There are 8 steps
between full compression and off compression.
FULL
6/8
4/8
2/8
OFF
19
LANGUAGE
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
SETUP
SET UP --- PREFERENCE PAGE
LANGUAGE
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
SET UP --- PREFERENCE PAGE
LANGUAGE
SUBTITLE
ENGLISH
CHINESE
FRENCH
SPANISH
JAPANESE
SET UP --- PREFERENCE PAGE
LANGUAGE
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
PARENTAL
Select suitable parental guidance by the
cursor buttons and conformed by
pressing ENTER button.
SET UP --- PREFERENCE PAGE
LANGUAGE
SUBTITLE
1 G
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO PARENTAL
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
LOCALE
Select preferred city by using the cursor
button, the player will depend on this
setting to choose related film grade
division.
CHINA
FRANCE
HONG KONG
JAPAN
TAIWAN
GBR
USA
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
PASSWORD
Select the change and press ENTER
button. Type the old password (The initial
factory is code 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
20
CHANGE
SETUP
SET UP --- PREFERENCE PAGE
LANGUAGE
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MAIN PAGE
Select reset to become factory initial setting.
GENERAL SETUP
SPEAKER SETUP
DEFAULT SETTING OP MODE LINEMODE
DOLBY DIGITAL SETUP
PREFERENCE PAGE
RESET
TV DISPLAY NORMAL/PS
TV TYPE MULTI
PIC MODE AUTO
ANGLE MARK ON
OSD LANGUAGE ENGLISH
SPDIF OFF
CAPTION OFF
DOWNMIX STEREO
DUAL MONO STEREO
DRC FULL
LANGUAGE ENGLISH
SUBTITLE ENGLISH
DISC MENU ENGLISH
LOCALE USA
PARENTAL 6 PG-R
PASSWORD 3308
21
SPECIFICATIONS
Supply Voltage : 12V DC (11V-16V), test voltage 14.4V, negative ground
Current Consumption : Less than 2.0A
Signal System : Compositive video 1.0Vp-p 75Ω RCA pin jack
Discs Played : (1) DVD-VIDEO Disc
Audio Output Level : 600Ω (2 ch 2.0 Vrms)
Audio Signal Output
Characteristics : (1) Frequency Response 20 Hz - 20 KHz
: (3) Wow and Flutter Below measurable limits
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
5” (12 cm) single-sided, single-layer
5” (12 cm) single-sided, double-layer
3” (8 cm) single-sided, single-layer
3” (8 cm) single-sided, double-layer
(2) Compact Disc (CD-DA, VIDEO CD)
5” (12cm) disc
3” (8 cm) disc
: (2) S/N Ratio 90 dB (JIS)
22
www.pyleaudio.com
88-V1200-11
Loading...