PYLE Audio PLDV6K User Manual

PLDV6K

PYLE DRYVER

PYLE DRYVER

PYLE DRYVER

PLDV6K

One Pair 6.5” Mid Bass Speaker:

Standard 6.5” Size OEM Iocations
Poly Injection Cone
Non-Fatiguing Butyl Rubber Surround
1” High Temperature ASV Voice Coil
25 Oz Magnet Structure
Rubber Magnet Cover
Power Handling: 120 Watts RMS. 240 Watts MAX
Frequency Response: 50Hz – 6KHz
Impedance: 4 Ohm

One Pair Tweeter:

1” Silk Dome Tweeter
3 Mounting Options: Flush / Swivel / Surface and

Angle Mount

50 Watts RMS / 100 W atts Peak

Frequency Response: 1.4 – 24KHz
Impedance: 4 Ohm

One Pair Passive Crossover Network

Two-Way Passive Crossover

12 dB Octave Slope

Accessories:

Includes Custom Grills
Wires and Installation Hardware

(PLDV6K)

48

(PLDV6K)

1.

Using mounting template for speaker, mark the
correct mounting location by a pencil or pen.

2.

Cut out the panel by this marking and drill 4
boles for the mounting bolts to pass through.

3.

Connect the terminal of speaker to car audio
correctly by using cord provided
Caution: Be careful not to miseonnect polarity

PLDV6K CUTOUT

4.

Insert grill & speaker Unit in the speaker
mounting hole at the rear panel and fix speaker
with bolts & screws & nuts provided.

6