Pyle Audio PL-DAND697 User Manual

PLDAND697

User Manual

CONTENT

INSTRUCTIONS TO READ THIS USER MANUAL

WARNING

CLEANING THE UNIT

INSTRUCTIONS TO THE PANEL BUTTONS

TURN THE UNIT ON/OFF

MAIN INTERFACE

RADIO FUNCTION OPERATION

PHONE FUNCTION OPERATION

BLUETOOTH MUSIC FUNCTION

MUSIC FUNCTION

VIDEO FUNCTION

QUICK PICTURE PREVIEWING FUNCTION

MIRROR LINK FUNCTION

WALLPAPER

LIVE WALLPAPER FUNCTION

CAMERA FUNCTION

BOOT LOGO FUNCTION ( optional )

REBOOT FUNCTION

AUX FUNCTION

ES FILE EXPLORER FUNCTION

TOOLS MANAGER FUNCTION

GUIDEBOOK FUNCTION

NAVIGATION FUNCTION

CAR SETTING

CONTENT

AUDIO SETTING

AUDIO STAGE

COMMON SETTING

NAVI SOFTWARE SETTING

BACKLIGHT SETTING

RADIO

DEFAULT SETTING

FACTORY RESET

FACTORY SETTING

SETTING

WLAN SETTING

DATA USAGE

MORE SETTINGS

LANGUAGE AND INPUT METHOD

DATE AND TIME SETTING

ABOUT CAR

STEERING WHEEL CONTROL

WIRING

TROUBLE SHOOTING

Instructions to Read this User Manual

Please read and use instructions this manual to explain operations and

precautions. These illustrations are reference only.

Warning

To avoid any injury or damage to yourself, your car and others, please

make sure to do as following:

1. Before using this unit, read all related instructions carefully.

Any damage caused by improper operations will not be covered by

warranty.

2. Do not watch videos or operate the unit while driving. Focus, drive

safely and violate traffic rules.

3. Do not dispose the unit into water to avoid short circuit.

4. Do not place or leave any kind of metal object (such as coin or metal

tools) in the unit to avoid short circuit.

5. Please operate the unit as advised this Manual. It is not allowed to

open the unit for maintenance. For any maintenance needed, please

refer to professional help.

6. After the car engine is off, please do not use the car audio for long

time, otherwise, the battery may be used up.

7. It is not allowed to insert any objects into the ventilating slot or other

opening of this unit.

8. It is not allowed to contact, rub or knock the screen.

Cleaning the Unit

If the panel is dirty it off with clean and soft cloth. For instance use

cleaning cloth. If the panel is very dirty, please clean the panel with mild

detergent, and then wipe the detergent with a clean and soft cloth.

Panel Introduction

Marks

Mark for important preventive measures. Please read

carefully in order to prevent any injury.

Mark for special explanation, auxiliary Interpretation,

limitation and references.

Mark for additional information to operate this unit.

Warm notes: When there is any difference between the

Manual and the actual unit, please take the actual unit as

standard.

01 02

It may affect the mechanical components of the

unit if cleaner spray is applied directly. It may

scratch The surface of the panel or remove the

letters if you use hard cloth or volatile liquid, such

as diluents or alcohol, to wipe the panel.

1. Disc Out Button

When there is a disc inside the device, press this button and the disc will

be ejected.

2. CD Mouth

Lightly insert the CD into the mouth with printed surface upwards, the

device shall automatically take in and read the CD.

3. SD

Memory card slot

4. MUTE

Press this button to turn off/on the volume.

5. Return Button

Press this button to return to the previous interface.

Under any state, press this button to power on/off the device.

Under any applications, press this button to increase the volume.

Under any applications, press this button to decrease the volume.

Turn the Unit On / Off

• Turn the Unit On

When the ignition switch is at ACC ON position, press the button

on the panel to switch the unit on.

• Turn the Unit Off

When the unit is ON, long-press the button on the panel for more

than 2s, the unit will turn off.

Main Interface

After the unit is turned on, the system will at Radio mode by default, then

tap the icon to enter the main interface.

1. Slide the screen left and right with your finger to switch the main

interface in different pages; Hold a function icon in main Interface to

move the position of the Icon.

2. Under any interface, tap the icon t a Ito return to upper-level

interface.

3. Under any interface, tap the icon to return to the main interface

directly.

03 04

4. Tap the icon to check recently open applications and those

running on the background.

5. Tap the icon in main interface to enter interface.

6. Slide down from the upper-right area of the main interface to open

Setting/Car Setting/MEMORYCLEANNVLAN off/ Brightness/Sound

setting interface directly.

7. Tap the icon in the main interface to turn the screen off;

then tap any area of the screen to turn the screen on.

Radio Function Operation

Tap the icon [Radio] in the main interface to enter the Radio interface.

Band Switch

Tap the icon to switch the radio bands among FM1/FM2

FM3/AMI/AM2.

Tune and Seek

Short-press the and to tune point by point; Long press the

and to seek manually. It will stop seeking when a station is

sync.

Auto Seek and Store stations

Long-press the icon to auto seek and auto store the radio stations.

When in progress and you want to stop, press again.

Settings

Tap the icon to enter setting interface; Tap the icon in setting

interface to set ST/LOC on and off.

Phone Function Operation

Tap the icon [Phone] in main interface to enter the interface below:

05 06

18 stations will be stored in FM band (6 stations in

FM1 FM2/FM3 each band); 12 stations will be stored in

AM band (6 stations in AM1/AM2 each band).

The system will stop seeking after one-circle seeking.

Pair and Connect

If this is the first time to pair unit to mobile device it is required follow

these instructions:

1. Turn the Bluetooth of the mobile on;

2. Search the Bluetooth device with the mobile or the unit, and connect.

3. A prompt message will show on the mobile, input the password 0000

and Confirm on the mobile;

4. After paired successfully, the system will enter the interface below:

5. After the unit is powered off and on, the Bluetooth of the unit will pair

the mobile last connected. After paired successfully, the icon

showing the connecting status on the upper-right corner of the screen

will turn White.

Dial

After the mobile is connected to the unit successfully, input a series of

phone numbers by tapping the number buttons on the screen, and then

tap the icon to make a call. If wrong number was dialed, you may tap

the icon to delete one by one, or long-press the icon to delete all. As

is shown in below interface:

07 08

It is required to turn on the function 'Visible to all

nearby Bluetooth devices" on the mobile, and then the unit

will to able to find the mobile Bluetooth device.

+ 14 hidden pages