PYLE Audio PLD-189 User Manual
Specifications and Main Features
- Power Supply: 14.4V DC (operating voltage: 11-16V)
- Output Rating: 60Wx4
- Load Rating: 4Ω
- Tone Control (±): 10dB bass - 100Hz, treble - 10KHz
- Mounting Dimensions: Approximately 169x182x53 mm (d/w/h)
- Overall Dimensions: 192x178x50 mm (approximately)
- Weight: Approximately 1.75 kg
- AM Frequency Range: 522-1620 (KHz) for Europe/Russia, 530-1710 (KHz) for the USA
- FM Frequency Range: Europe: 87.5-108 (MHz), American: 87.5-107.9 (MHz), GPA: 65-74 (MHz)
- Signal To Noise Ratio (dB): 60
- Frequency Response (Hz): 30-15000
- Modulation Frequency (kHz): 450
- FM IF Range: 10.7MHz
- Amplification Range: 32: 98dB
Frequently Asked Questions
- Q: Which discs can be used with this device?
A: This device is compatible with VCD, DVD, MP3, and CD disks.
- C: How can I reset the unit?
A: Using a thin object, depress the reset button located at the base of the unit, after pulling off the front panel in order to reset the unit.
- Q: What do I do if my unit does not have any power?
A: Inspect the fuse for any damage and change it with the correct value if there is any damage present.
- Q: I want to change Sound settings, how can I do that?
A: You have the option to change the sound settings by pressing the SEL button to change modes or using the VOL buttons to set levels.
- Q: Will I be able to connect my smartphone with the device?
A: Yes, you can connect your smartphone to the main unit via AUX In (optional) to enhance the clarity during conversation.
- Q: How big is the device that I will have to install?
A: Roughly, the dimensions of the device is 192 x 178 x 50 mm (d/w/h), with mounting dimensions of roughly 169 x 182 x 53 mm (d/w/h).
- Q: What is the procedure for activating the loudness function?
A: To activate the loud function, simply press the LOUD button on the remote control to turn the function on.
- Q: Suppose I insert a CD via the loader, but it doesn't get detected/applicable what should I do?
A: You need to make sure that the CD is correctly loaded into the mechanism.
This will also depend on the nature of the issue, however, if you know that the issue still stands, consider looking into any possible obstructions.
User Manual
Loading...