Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
SPECIFICATIONS
Rear View Backup Camera, Parking Reverse Cam, Front/Rear Mount
Features:
Universal Mount Vehicle Backup Camera
Waterproof & Weather-Resistant
Marine Grade Camera Construction
Built-in Distance Scale Lines
Color Picture Output
Mount Options: Front or Rear Installation Support
Compact, Slim Bar Camera Style
Tilt Adjustable Camera Lens Angle
Rugged & Durable Metal Housing
Includes Installation Cables/Wires
Auto White Balance & Image Adjustment
What’s in the Box:
Backup Camera
DC Power Cable
RCA Video Cable, 17’ ft.
Technical Specs:
Marine Grade Rating: IP-67
Low Lux Light Performance (0.2 LUX)
Video Output: 1.0V PP-75 Ohm
Resolution: 656 x 492 Pixels, 420 TV Lines
Viewing Angle: 170 Degree
Power Supply: DC 12V, 200mA
Dimension (L x W x H): 1.1'' x 0.9'' x 0.8''
Weight: 0.5 lbs.
1
www.PyleUSA.com
1. WIRE CONNECTION
Please hard wire the red positive wire connected to the round 1 mm DC
plug (pictured below) to your reverse tail light positive 12V connection
and the black wire to the closest available ground. You will probably
need a small length of wire to reach from your reverse tail light to the DC
plug.
2. Please Attach the camera to your license
plate bracket as shown above. You can
then run your wires so that they are out
of the way.There is one 2 jack on the
camera unit cable, the yellow RCA jack
is for the video output, and red is for
12V DC power supply, and also there is
2 button, the red button is to control
the camera front view or back view
picture image, and black button is
control the scale line on or o.
2
www.PyleUSA.com
3. Please plug the round 1 mm DC plug that you just wired to your reverse
tail light into the red (A) power connection (image on page 2)
4. Use the included 5m video cable to connect the yellow video wire (B) to
your video monitor.
Video Cable
Monitor
Video (out)
Camera
Backup Light Power
Red: +12V (in)
Black: GND (in)
Attention:
The camera switch is controlled by the reverse gear shift. When you put
your car in reverse, the camera will receive its 12 V power from the reverse
tail light.
3
www.PyleUSA.com
Loading...