PYLE Audio PLCD19XMR User Manual

Download

PLCD19XMR

OWNER’S MANUAL

Mobile Audio System

• PLL Synthesizer Stereo Radio

• Digital Compact Disc Player

• XM Ready Function

• Automatic Memory Storing

• Slide Down Detachable Panel

• Direct Track Access

• Program CD Tracks

• CD Changer Control

• Auxiliary Input Function

• Wired Commander Control

www.pyleaudio.com

CONTENTS

Installation .....................................................................................................3

DIN Front-Mount....................................................................................................3

Installing the unit.............................................................................................3

Removing the unit...........................................................................................4

Using the Detachable Front Panel .............................................................5

Wiring Connection ........................................................................................6

Operation.....................................................................................................10

General Operation ..............................................................................................10

Radio Operation .................................................................................................13

XM Operation ......................................................................................................13

CD Operation ......................................................................................................14

CDC Operation ....................................................................................................15

Specification................................................................................................17

Trouble Shooting.........................................................................................18

INSTALLATION

Notes:

• The unit can be installed on the vehicle or the ships.

• Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

• Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle or the ship.

• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

• If installation angel exceeds 30¢Xfrom horizontal, the unit might not give its optimum performance.

TAKE OUT SCREWS BEFORE INSTALLATION

Before install the unit, please remove the two screws.

Take out screws before installation

NOTE: If this unit is installed on the ship, you should use two pieces of plastic film (30mmX20mm) supplied with the unit to seal the two holes after remove the screws. And this will be waterproof.

DIN FRONT-MOUNT

Installing the unit

182

30˚

• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

(Fig. 1)

1. Dashboard

2. Holder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

3. Screw

INSTALLATION

Removing the unit

7 4

(Fig. 2)

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5x25mm)

5. Screw

6. Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

Front Panel

OPEN button

1. Before removing the unit, press the OPEN button to slide down the front panel.

2. Lever Insert the levers supplied with the unit into the grooves in the housing as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel

1. Press the OPEN button, the front panel will slide down.

Open

2. When the front panel slides down, press the bottom button of the front panel upward and pull it out from the panel bracket.

Bottom

Button

3. For safekeeping, store the front panel in the supplied protective case immediately after being removed.

To Reinstall the Front Panel

1. When the panel bracket is in slide down position, insert the front panel into the panel bracket and push the front panel from the middle to slide it up.

Bottom

Button

Front Panel

Protective Case

WIRING CONNECTION

RED RCH

WHITE RCH

AUX IN CABLE (YELLOW)

ANTENNA CONNECTOR

(BLACK)

WIRING REMOTE

CONNECTOR SOCKET

XM AUDIO CABLE(BLACK)

FUSE

AUDIO R IN (RED) AUDIO L IN (WHITE)

XM RECEIVER CONNECTOR SOCKET (BLACK)

(BLACK) CD CHANGER CONNECTOR SOCKET

OPERATION

CONTROL & FUNCTIONS KEYS

1 8 56

2 3 4 7

This unit is a marine rated wired remote control made using a modified controller or similar layout. It is capable of operation specified functions on the marine AM/FM/CD receiver. The body, buttons, controls and display need to be UV and water-resistant. It includes and LCD and an illumination circuit. The flat body should be watertight and the circuit board clear coated.

1 Power button

Press the button (1) shortly to turn on/off the head unit. Press control button. When system power turns on, the volume is set to initial volume level.

2 MUTE button

In RADIO/AUX IN mode, press MUTE / button (2) to activate mute function and “MUTE” will appear on the display. Press the button once again to release mute function and return the volume to the last position before it was muted. In CD/CDC mode, press again to resume play.

3 VOLUME +/- buttons

Press VOL / buttons (3) to increase/decrease volume level.

button (1) for more than 3 seconds, the button is operated to initial volume

/ MUTE button (2) to pause CD/CDC player. Press it

OPERATION

4 MODE SELECTION button

Press the MODE button (4) to step sequentially through the following sources: e.g. radio mode to CD mode to CDC mode to AUX in mode.

5 BAND SELECTION button

Press the BAND button (5) to step sequentially through the following bands: FM1, FM2, FM3, AM1, AM2.

6 TRACK/SEARCH/TUNE buttons

• STATION SELECTION (FOR RADIO OPERATION) Press more than 3 seconds until “MAN” appears on the display, the manual tuning mode is selected. If both buttons have not pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.

• SELECT TRACKS (FOR CD OR CDC OPERATION) Press the track. Press the / buttons (6) for more than 3 seconds to activate fast forward or rewind of the disc. Disc play starts from when you release the button.

7 SHIFT/SCAN button

• SCAN (FOR RADIO OPERATION) Press band. Radio pauses for five seconds at each strong station. At each time the frequency is flashing on the display. Press listen to current station.

• SELECT DISC (FOR CDC OPERATION) During CDC operation, press SHIFT/SCAN button (7) to shift mode. And then “SHIFT” will appear on the display. At shift mode, press select next disc or previous disc. If there is not any operation for several seconds, it will exit shift mode automatically.

/ buttons (6) shortly to activate automatic seek function. Press for

/ buttons (6) shortly to move to the following track or the previous

SHIFT/SCAN button (7) to scan through strong stations in the current

SHIFT/SCAN button (7) again to

/ buttons (6) to

8 Liquid Crystal Display

Exhibit the number, the current disc and the current track, and other activated functions on the display (8).

INSTALLATION

INSTALLATION HARDWARE

HOLDER

SCREW (ø4X50)

INSTALLATION DIAGRAM

BASE REMOTE

MOUNTING BRACKET

X1X1X1

NUT

X2 X2

1. First insert the hooks on the base into the slots of the holder to install the base to the holder.

2. Select the proper object, then place the remote mounting bracket on the base and let the object go through the base and the mounting bracket.

3. Align the screw holes on the holder with the screw holes on the base and the screw holes on the bracket, then use the two screws (ø4X50) and nuts to fix the bracket, the base and holder to the proper location.

4. Last install the remote control to the holder. See below, align the four hooks on the holder with the four slots on the remote control.

OPERATION

LOCATION OF KEYS

16 1710

119 1

1312

1419

22 2320 21 246

5 25

151834

2 7

1. DISP

2. AS/PS/ELAPSE

/MUTE

5. DISC SLOT

6. MODE

7. OPEN

8. LIQUIID CRYSTAL DISPLAY

9. PWR

10. SEL/MENU

11. VOL

12. VOL

13. SHIFT/SCAN/XM-MOD

14. M1~M6 Preset buttons

15. LOUD/DIM

16. CH

17. CH

18. BAND/ENTER

19. M1 MEM (CAT

20. M2 PGM (CAT

21. M3 RPT

22. M4 SHF

23. M5 SCN

24. M6

25. Reset Button

)

OPERATION

GENERAL OPERATION

SWITHCHING ON/OFF THE UNIT

Pressing PWR button (9) to switch on or turn off the unit. When system power turns on, the system is returned to previous mode.

FACEPLATE RELEASE

Press OPEN button (7) to slide down the removable faceplate.

SOUND ADJUSTMENT

Press SEL/MENU button (10) shortly to change audio mode through volume, bass, treble, balance, and fader mdoes, Press VOL

button (11) or VOL button (12)

to adjust the selected mode. When the currently displayed function has not been adjusted for several seconds, the mode shall return to volume position and display will return to normal radio, CD or CDC display.

Volume Bass Treble Balance Fader

Volume

Press SEL/MENU button (10) one time. Adjust volume level by VOL or VOL

button (12). Notes: The unit is initially set to volume mode.

Bass

Press SEL/MENU button (10) two times. Adjust bass level by VOL

VOL

button (12).

Treble

Press SEL/MENU button (10) three times. Adjust treble level by VOL button VOL button (11) or VOL button (12).

Balance

Press SEL/MENU button (10) four times. Adjust sound balance between left and right speakers by VOL

VOL

button (12).

Fader

Press SEL/MENU button (10) five times. Adjust sound balance between front and rear speakers by VOL

VOL

button (12).

MENU SELECTION FUNCTION

Hold press SEL/MENU (10) for several seconds to enter menu select function, then step short press SEL/MENU (10) to

button (11)

button (11) or

select different set mode and separately to press VOL

button (11) or VOL

button (12) to select your requisite as following order.

BEEP ON/OFF PROGRAM POWER ON VOLUME LEVEL

CLOCK ON/OFF WHILE POWER OFF USA/EUR

FREQ/CLOCK/NO PRI PRIORITY 12 HOURS/24 HOURS

For detailed operations, please see below:

BEEP ON/OFF

Hold press

SEL/MENU button (10) for several seconds, when BEEP ON/OFF appears, press

VOL button (11) or VOL

button (12). to select BEEP on or BEEP OFF. When beep on, the beep in generated when every button is pressed. When beep off, the beep is disabled when press any button.

Program power on volume level

Hold press

SEL/MENU button (10) for several seconds, when BEEP ON/OFF appears, press

SEL/MENU button (10) shortly one time to select “program power on volume level” mode. And then you can

VOL button (11) or VOL button

press (12)

to select the level when the unit turns

on.

USA/EUR

Hold press

SEL/MENU button (10) for several seconds, when BEEP ON/BEEP OFF appears, press (10)

shortly two times to select “USA/EUR”

mode. And then you can press

SEL/MENU button

VOL

button (11) or VOL button (12) to select USA or European radio frequency spacing.

- USA radio spacing is 200k for FM and

10k for AM. This is the default frequency spacing.

- European radio spacing is 50k for FM

and 9k for AM.

CLOCK ON/OFF while power off

Hold press

SEL/MENU button (10) for several seconds, when BEEP ON/OFF appears, press

SEL/MENU button (10) shortly three times to select “clock on/off while power off” mode. And then you can press

VOL button (11) or VOL button

(12)

to select if the clock is to be displayed

while power off.

FREQ/CLOCK/NO PRI priority

Hold press

SEL/MENU button (10) for several seconds, when BEEP ON/OFF appears, press

SEL/MENU button (10)

shortly four times to select

OPERATION

“FREQ/CLOCK/NO PRI priority” mode. And then you can press VOL button (11) or VOL button (12) to select frequency priority or clock priority or no priority.

- When select Frequency Priority: The frequency will appear on the unit all the while. Pressing DISP button (1) while in Frequency Priority will temporarily display clock and then returns to frequency display.

- When select Clock Priority: The clock will appear on the unit all the while. Pressing DISP button (1) while in Clock Priority will temporarily display selected station frequency (in RADIO mode) or track number (in CD/CDC mode) and then returns to clock display.

- When select No Priority: When the frequency appears on the unit, pressing DISP button (1) will display clock and it will not return to frequency display until DISP button (1) pressed again. When the clock appears on the unit, pressing DISP button (1) will display frequency information.

12hours/24hours

Hold press SEL/MENU button (10) for several seconds, when BEEP ON/OFF appears, press SEL/MENU button (10) shortly five times to select “12hours/24hours” mode. And then you can press VOL button (11) or VOL button (12) to set 24 hours mode or 12 hours mode.

- When the currently displayed function has not been adjusted for several seconds, it will exit menu set mode.

- When you have set CLOCK ON during power off state, LCD backlight will be turn on together.

DISPLAY INFORMATION

When pressed quickly, the DISP button (1) changes the display as follows.

- In AM/FM mode:

-> Frequency ->CLOCK ->

- In XM mode:

-> Channel Name -> Artist Name -> Song Title -> Category Name -> CLOCK

- In CD mode:

-> CD ->CLOCK ->

- In CDC (or AUX) mode:

->CDC (or AUX)->CLOCK ->

Each display time is 5 seconds, the display will return to the first position after 5 seconds.

SET THE CLOCK

Press the DISP button (1) shortly until the clock is shown on the LCD display. Then hold down DISP button (1) until the clock flashes. Then press the CH button (17) clockwise to change hours or rotate the

CH button (16) to change minutes.

MUTE

In radio/XM/AUX IN mode, press /MUTE button (3) to mute audio level. Press the button again to release mute function.

LOUDNESS

Press LOUD (DIM) button (15) shortly to reinforce the bass output and display will show “LOUD”. Press it again to release this function.

MODE SELECTION

Press MODE button (6) to sequence through primary operating modes in the following order: radio >XM > CD> CDC> AUX. If playback media (CD) is not loaded into mechanism, CD mode will be skipped. If CDC is not connected to head unit, CDC mode will be skipped. If XM receiver connector is disconnected to XM head unit, XM mode will be skipped.

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (8).

ILLUMINATION

Press LOUD (DIM) button (15) for more than 2 seconds to adjust the brightness of the LCD display backlight.

RESET FUNCTION Reset button (25) must be activated with

either a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons:

- Initial installation of the unit when all wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

Note: If press reset button (25), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the front panel.

RECOVERING INITIAL VALUE

In radio (AM/FM) mode, press MODE button (6) for more than three seconds, the display will appear “EEP INIT”, and all settings recover factory value.

OPERATION

RADIO OPERATION

SWITCHING TO RADIO MODE

Press MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency.

SELECTING THE FREQUENCY BAND

At radio mode, press BAND/ENTER button (18) shortly to select the desired band. The reception band will change in the following order:

FM1 FM2 FM3 AM1 AM2

SELECTING STATION

Press

CH button (16) or CH button (17) shortly to activate automatic seek function. Press for more than 3 seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.

AUTOMATIC MEMORY STORING & PRSET SCAN

- Automatic memory storing

Press AS/PS button (2) for serveral seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 10 strongest stations are stored into the corresponding preset number button

- Preset Scan

Press AS/PS button (2) shortly to scan all station presets saved in memory.

STATION STORING

The preset buttons (14) can be used to store 10 stations in each band (FM 1, FM 2, FM 3 and AM1, AM2) for convenient access to your favorite stations.

- Programming stations

1. Select the desired band, then tune in the station you want to store in memory.

2. Press and hold one of the preset buttons (14) for more than 2 seconds

until the corresponding preset button number appears. Repeat steps 1 and 2 to program additional stations.

- Quick tuning Select the desired band, then press one of the ten preset buttons (14).

SCAN

Press SHIFT/SCAN button (13) to set function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds.

XM OPERATION

SWITCHING TO XM MODE

Shortly press MODE button to select XM mode.

SELECTING USER-PRESET CHANNEL

In XM mode, the XM user-preset channel group is toggled cyclically through the group by quickly pressing the BAND button. The channel will change in the following order:

XM1 XM2 XM3

SELECTING CHANNEL UP/DOWN

Press the channel up or down.

SEARCHING SCHANNEL

When the AS/PS button is shortly pressed, the unit searches for each user preset channel from XM1 , XM2 to XM3. When an available channel is detected, the channel will be held at that preset number and played about 5 seconds. After that, it will search for another available channel.

DIAGNOSTIC MODE

Press and hold AS/PS button for over 5 seconds will enter diagnostic mode and display “STATE1”, then press channel UP/DOWN key to select each state as below:

->STATE1->STATE2->STATE3->STATE4

->STATE5->STATE6->STATE7-> STATE8

->STATE9

Short press AS/PS button will exit diagnostic mode.

CH / buttons to select the

OPERATION

STORING PRESET CHANNELS

The preset buttons can be used to store channels for convenient access to your favorite channels.

- Programming channels

1. Select the desired channel you want to store in memory.

2. Press and hold one of the preset buttons for more than 2 seconds until the corresponding preset button number appears. Repeat steps 1 and 2 to program additional channels.

- Quick tuning Shortly press one of the preset buttons to select a preset channel directly.

MODE SELECTION

Press XM-MOD button to switch CATEGORY mode, DIRECT mode, or NORMAL mode. Its sequence is as follows:

Normal Category mode Direct Tune

When category mode is selected, the CATEGORY appears on the display and the function is activated. When Category mode is released, the CATEGORY disappears. When Direct mode is engaged, “DIRECT” of alphanumeric display is turned on.

Select category and tune UP/DOWN within selected category

Use M1 button or M2 button to select desired category and press BND/ENT button to confirm. In CATEGORY mode, channels can be

tuned by press

CH button (16) or CH

button (17) within the same category.

How to direct tune

Press XM-MOD to select DIRECT MODE.

1. In direct mode, display shows “CH000” channel number. (Hundred Digit flashing on/off)

CH button, CH button or directly

2. Use press numeric buttons(0-9) to select hundred digit.

3. Press XM-MOD button to confirm entry of the hundred digit and the 10s digit is flashing on/off.

CH button, CH button or directly

4. Use press numeric buttons (0-9) to select 10s digit.

5. Press XM-MOD button to confirm entry of the 10s digit and the 1s digit is flashing on/off.

CH button, CH button or directly

6. Use press numeric buttons(0-9) to select 1s digit.

7.Press BAND button to confirm direct tune. If selected a nonexistent channel, after the channel number was entered, each digit will be converted to dashes for 2s, then the display will return to the previous channel and settings.

CD OPERATION

SWITCHING TO CD MODE

If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD is drawn into the driver automatically. CD playback begins. If a CD is already inserted in the driver: Keep pressing MODE button (6) shortly until the CD mode display appears.

EJECTING A DISC

Press playing and eject the disc from the disc slot (5).

PAUSING PLAYING

Press player. Press it again to resume play.

SELECTING TRACKS

Press (17) to move to the previous track or the following track. Track number shows on display. Hold press button (17) to fast reverse or fast forward. Disc play starts from when you release the button.

DIRECT TRACK ACCESS

Pressing number buttons 0~9(14) (i.e. 19~28) can activate DIRECT TRACK ACCESS according to your need. For example, press button (19), and “T-01” will be flashing on the display. Then press button (20), “T-12” will appear and track 12 will be selected to play. If you don’t press any button when “T-01” is flashing. After several seconds, “T-01” doesn’t flash and track 1 is selected to play. If

(EJECT) button (4) to stop CD

/MUTE button (3) to pause CD

CH button (16) or CH button

CH button (16) or CH

OPERATION

you select a track number that doesn’t belong to the current disc, “NO TR” will appear on the display.

REPEATING THE SAME TRACK

Hold press RPT button (21) for several seconds to continuously repeat the same track. Hold press it again to stop repeat.

PLAYING ALL TRACKS IN RANDOM

Hold press SHF button (22) for several seconds to play all tracks on CD in random order. Hold press again to cancel the function.

PREVIEWING ALL TRACKS

Hold press SCN button (23) for several seconds to play first several seconds of each track on the current disc. Hold press again to stop intro and listen to track.

PROGRAM CD TRACKS

Use Program function to select up to 32 tracks to play in any order. Program works by allowing you to select a track number for each spot in the playing sequence. A CD must be inserted and in CD playing mode to use Program.

- How to program CD tracks.

1. Hold press MEM button (19) for several seconds to enter Program mode, then “PGM” stars flashing and “P-01” icon appear on the display.

2. Press

CH button (16) or CH button (17) to choose track number. For example, select track 6, then press MEM button (19) shortly to memorize it and “P-02” will appear on the display. So track 6 will be played first. Thus, you can also press buttons (17) and (16) to choose track number 10 and press MEM button shortly, then “P-03” will appear. So track 10 will be secondly played. Repeat these operations, and you can program CD tracks to your need. If you completed program setting, hold press PGM button (20) for several seconds to play CD in programmed order. Note: Using Program function can only select up to 32 tracks to play in any order. When you have selected 32

CH /

tracks to be programmed. “FULL” will appear on the display.

- When the CD is played in programmed order by hold pressing PGM button (20) for several seconds, hold pressing it again for several seconds will exit PGM mode.

- When the disc is playing in programmed order, hold pressing MEM button (19) for several seconds will cancel the all programmed content and “CLEAR” appears on the display.

- If you don’t press MEM button (19) to carry out program setting, then hold press PGM button (20) for several seconds, “NO-PGM” will appear.

TRACK/TIME DISPLAY

Press AS/PS button (2) to show running time/remain time of track.

CDC OPERATION

You can connect a CD changer to the unit with CDC operation version only. Information on handing CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.

SWITCHING TO CDC MODE

Keep pressing MODE button (6) shortly until the CDC mode display appears. Playback begins with the first CD that

the CD changer detects.

PAUSING PLAYING

Press CDC player. Press it again to resume play.

SELECTING TRACKS

/MUTE button (3) to pause

CH button (16) or CH button

CH button (16) or CH

OPERATION

DIRECT TRACK ACCESS

REPEATING THE SAME TRACK

Hold press RPT button (21) for several seconds to continuously repeat the same track. Hold press it for several seconds again to stop repeat.

PLAYING ALL TRACKS IN RANDOM

Hold press SHF button (22) for several seconds to play all tracks on the current disc in random. Hold press it for several seconds again to cancel the function.

PREVIEWING ALL TRACKS

Hold press SCN button (23) for several seconds to play first several seconds of each track on current disc. Hold press it again for several seconds to stop intro scan and listen to track.

TRACK/TIME DISPLAY

Press AS/PS (ELAPSE) button (2) to show running time of track.

SELECTING DISC

Press SHIFT/SCAN button (13) to shift mode and then “SHIFT” will appear on the display. At shift mode, press

CH button (16) or CH button (17) to select previous disc or next disc. If there isn’t any operation for several seconds, it will exit shift mode automatically. At shift mode, you can also press number button 0~9 (14) (i.e. 19~28) to select the disc directly. If you select 3# disc (press button (21), and there isn’t a disc in the 3# slot, “NO CD” will appear.

DISC NOTE A. Notes on discs:

1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit.

2.Do not stick paper or tape etc., onto the label side or the recording side of any discs, as it may cause a malfunction.

3. Dirt, dust, scratches and warping discs will cause misoperation.

B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs):

1.Be sure to use discs with following marks only for the unit to play:

Recordable Rewritable

2.The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or CD-R/ CD-RW software for more information on finalization process).

3.Depending on the recording status, conditions of the disc and the equipment used for the recording, some CD-Rs/CD-RWs may not be played on this unit. (See *1)

*1: To have more reliable play back,

please see following recommendations:

a. Use CD-RWs with speed 1x to 4x

and write with speed 1x to 2x.

b.Use CD-Rs with speed 1x to 8x and

write with speed 1x to 2x.

c. Do not play a CD-RW which has

been written for more than 5 times.

SPECIFICATION

GENERAL

Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls

- Bass (at 100 Hz) : ± 10 dB

- Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 50 Watts Current Drain : 15 Ampere (max.)

CD PLAYER

Signal to Noise Ratio : More than 60 dB Channel Separation : More than 50 dB Frequency Response : 40 Hz - 18 KHz

RADIO

Frequency Coverage IF Sensitivity (S/N = 30 dB) Stereo Separation

Frequency Coverage IF Sensitivity (S/N = 20 dB)

: 87.5 to 107.9 MHz : 10.7 MHz :3 µV : > 30 dB

: 530 to 1720 KHz : 450 KHz : 32 dBu

TROUBLE SHOOTING

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

Symptom Cause Solution

No power. The car ignition switch is If the power supply is

not on. connected to the car accessory

circuits, but the engine is not moving, switch the ignition key to “ACC”.

The fuse is blown. Replace the fuse.

Disc cannot be Presence of CD disc inside Remove the disc in the player, loaded or ejected. the player. then put a new one.

Inserting the disc in reverse Insert the compact disc with direction. the label facing upward.

Compact disc is extremely Clean the disc or try to play a dirty or defective disc. new one.

Temperature inside the car Cool off or until the ambient is too high. temperature return to normal.

Condensation. Leave the player off for an hour

or so, then try again.

No sound. Volume is in minimum.

Adjust volume to a desired level.

Wiring is not properly Check wiring connection. connected.

Sound skips. The installation angle is Adjust the installation angle less

more than 30 degrees. than 30 degrees.

The disc is extremely dirty Clean the compact disc, then or defective disc. try to play a new one.

The operation keys The built-in microcomputer Press the RESET button. do not work. is not operating properly Front panel is not properly fixed

due to noise. into its place.

The radio does not The antenna cable is not Insert the antenna cable firmly. work. The radio connected. station automatic selection does not The signals are too weak. Select a station manually. work.

88-C1802-17

PYLE Audio PLCD19XMR User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual