PYLE Audio PLBKA100SL, PLBKA100BK User Manual

100 Watts Waterproof Portable Bicycle/Scooter MP3/

PLBKA100BK

PLBKA100SL

Ipod Music Player (Black)

100 Watts Waterproof Portable Bicycle/Scooter MP3/ Ipod Music Player (Silver)

Including:

this bike speaker system has been

1. One piece portable MP3 loudspeaker player

2. One piece easy installation bicycle handlebar bracket.

3. One piece USB cable

bike speaker system.

bike speaker system,

Device Features

-The high quality aluminum case is sultable for both indoor and outdoor

-The internal superior Hi-Fi speaker produces excellent sound outdoor settings.

-With the special Amp. design. the speaker output quality will not decay

-The internal rechargeable long-life Li-ion battery provides for extended use

-When the earphone is plugged in. the device switches from the speaker to

-Incorporating the USB, charging and earphone inputs into one jack results

-The device supports MP3/WMA format.

environments.

quality in both indoor and

during the life of battery.

the earphone automatically. in an elegant appearance.

Product Specification

Model No. PLBKA100BK/PLBKA100SL Speaker output THD+N=0.15%

SNR=94dB Earphone Output THD+N=0.6%

SNR = 92 dB

@ 1.5W @ 1.5W

@ 32Ω @ 32Ω

Playing Time Speaker: 8.5 hours(depends on the playing volume)

Earphone : 55 hours

Charging Time USB: 8 hours

USB(5V/1A) A/C commercial adaptor:3 hours

Capacity 2G Interface USB 2.0 Full speed

File System FAT16 / FAT32 Music Format MP3 / WMA (Below 384 kbps)

Temperature Function within -10°C - 50°C Size/Dimension 100 x 40 x 40 mm Weight 240g

Button Operations

5 6

►

2 1

1. Shared Earphone/POWER/USB 3.5mm

input with cover

2. SKIP Forward

3. VOLUME Decrease

4. VOLUME Increase

5. POWER On or Off, and Play or Pause

6. SKIP Backward

7. LED status indictor

Charging the Device

- The device needs to be fully charged before its initial use 8 hours.

- To charge the battery, use the 3.5mm/USB cable.

- Attach the 3.5mm connector at one end of the cable to the device and the USB at the other end to a computer.

- The LED indicator will illuminate during charging, and it will go out when the device is fully charged.

- The device will shut off automatically when the USB cable is disconnected (including during charging or data transmission).

Downloading Music

- Connect the device to a computer through the USB cable. The device can then be operated as a flash drive for downloading music.

- It is recommended to create separate folders for a variety of music and for easy access and downloading.

- The WMA format supports Window Media Audio up to and including version

9. It does not support “Digital Right Management (DRM)” format.

Instructions for Operating the Device

1. Power on : Pressing the button lightly, the device will play song automatically after the LED indicator stays on for approximately 3

2. Power off : Pressing the button for about 3 seconds, the LED indicator

►

seconds.

will flash rapidly and go out and the device is turned off.

3. Pause: Pressing the button lightly during playing will cause the LED to stay on and the player will enter the “Pause” mode. Pressing the button

►

lightly again will return the player to normal play status. Please note that the system will turn itself off automatically after 1 minutes in "Pause" mode.

4. Change songs during the playing: Pressing the button lightly, the device will skip to the next song. Pressing the button lightly, the device will skip to previous song.

►

The LED Indicator

- The LED indicator will flash once every second when the device is playing normally.

- While no song in the memory, the LED indicator will illuminate for two seconds and flashes for one minute until the device shut down.

- The LED indicator will flash rapidly when the battery is low and it continues to flash rapidly until the battery is dead.

- The LED indicator flashes when the battery is charging and stays on when the charging is completed.

- The LED indicator will continue to flash while the songs are being downloaded.

Trouble Shooting

- The LED indicator is functioning normally, but there is no sound: Check whether or not the earphone is plugged in and that the USB cable is still connected.

- When the device is not playing normally or behave abnormally when connected to the computer: Charge the device for approximately 30 minutes and then Reset the system.

Installation Instructions

Securing the MP3 loudspeaker player into the handlebar bracket.

Releasing the MP3 loudspeaker player from the handlebar bracket.

Correct angle

Wrong angle