pyleaudio PICL90PAD User Manual

Pack carefully in original package if possible.We are not
IMPORTANT:
responsible for damage incurred in returning items for repair.A letter stating your exact street addres, daytime phone number, and the problem you are experiencing should be included. You must also enclose a copy of the original receipt a sproof of date of purchase
www.pyleaudio.com
www.pyleaudio.com
s Manual
,
User
iPad/iPhone/iPod Docking
Speaker System w/ Alarm Clock and FM Radio
iPhone Docking System
www.pyleaudio.com
KNOW THESE SAFETY SYMBOLS
This “bolt of lightning” indicates uninsulated material
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should notbe placed on this apparatus.
within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Important Safety Instructions
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves,or other apparatus (including ampliers)that produce heat.
9.Protect the power cord from beingwalked on or pinched, particularly atplugs, convenience receptacles, and the point where they exit from the apparatus.
10.Only use attachments/accessories specied by the manufacturer.
11.Use only with the cart, stand, tripod,bracket, or table specied by the manufacturer or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12.Unplug this apparatus during lightningstorms or when unused for long periods of time.
13.Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plugis damaged, liquid has been spilled orobjects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped.
14.Battery usage CAUTION – To prevent battery leakage which may result inbodily injury, property damage, or damage to the apparatus:
Install all batteries correctly, + and -as marked
on the apparatus.
Do not mix batteries (old and new or carbon and
alkaline, etc).
Remove batteries when the unit is not used for
a long time.
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as sunshine, re or the like.
15.Apparatus shall not be exposed to dripping or splashing.
16.Do not place any sources of danger on the apparatus (e.g. liquid lled objects,lighted candles).
17.Where the MAINS plug or an appliance coupler is used as the disconnect device,the disconnect device shall remain readily operable.
Hearing safety
Listen at a moderate volume.
● Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher volumes of sound.
So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this,set your volume to a safe level before your hearing adapts and leave it there.
To establish a safe volume level:
● Set your volume control at a low setting.
● Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
Listen for reasonable periods of time:
● Prolonged exposure to sound, evenat normally ‘safe’ levels, can also cause hearing loss.
● Be sure to use your equipment reasonably and take appropriate breaks.
Warning
● Never remove the casing of this apparatus.
● Never lubricate any part of this apparatus.
● Never place this apparatus on other electrical equipment.
● Keep this apparatus away from direct sunlight, naked ames or heat.
● Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the
apparatus from the power.
Features
● Play and charge your iPod/iPhone/iPad simultaneously
● FM radio with 20 preset stations
● 3.5mm AUX IN jack for portable music player
● Clock synchronization with iPod/iPhone/iPad when docked
● Set your iPod/iPhone/iPad music or radio tunes as wake-up alarm
● 6W RMS total output power
What’s in the box
Check and identify the contents of your package:
● 1 x AC Adapter
● Main unit
● 1 x 3.5mm stereo audio link cable
● 2 x AAA Batteries
● User manual
“Made for iPod,” “Made for iPhone,” and“Made for iPad” mean that an electronic accessory has been designed to connect specically to iPod, iPhone, or iPad, respectively,and has been certied by the developer to meet Apple performance standards. Apple is not responsible for he operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPad, iPhone, iPod, iPod classic, iPod nano, iPod shufe, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Compatible iPod/iPhone/iPad
● iPod touch (4th generation)
● iPod touch (3rd generation)
● iPod touch (2nd generation)
● iPod touch (1st generation)
● iPod classic
● iPod with video
● iPod nano(6th generation)
● iPod nano (5th generation)
● iPod nano (4th generation)
● iPod nano (3rd generation)
● iPod nano (2nd generation)
● iPod nano (1st generation)
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad
● iPad 2
Overview of the main unit
Install batteries
1.
Navigate through the menus on a docked iPod/iPhone/iPad.  Select a radio station.
2.OK
 Conrm selection.
3.MENU/SYNC
 Control iPod/iPhone menu.  Synchronize the time with the iPod/iPhone/iPad.
4.TIME SET
  Set the clock.
5. (ALARM1 ALARM2)
  Set the alarm timer.   Turn off the alarm tone.   View alarm settings.
6.STANDBY
  Turn on the unit or switch to standby mode.
7.INPUT
  Selecting the input source.
8.SNOOZE/DIMMER
  Adjust the display brightness.   Repeat the alarm.
9.SLEEP
  Set the sleep timer.
10.MEMORY
  Store the radio station.
11.VOL+ VOL-
  Increase or decrease the volume.
12.
  Start or pause iPod /iPhone/iPad playback.
13.
  Skip to the previous/next audio le.   Select a preset radio station.   Adjust time.
14.Dock for iPod/iPhone/iPad
  Load an iPod/iPhone/iPad.
15.DC 5V
  DC power in jack.
16.AUX IN
  Jack for an external audio device.
17.FM ANT
  Improve FM reception.
15
FM
ANT
NOTE:You can only use DC power as power supply.Batteries are for backup purpose. They keep the clock operating in the event of a power interruption.
1.Open the battery compartment.
16
2.Insert 2 x AAA size batteries with correct polarity (+/-) as indicated.
3.Close the battery compartment.
17
Place the iPad into the dock
1. Plug the stand for iPad into the holes.
2. Make sure the home button on iPad is directed at the middle of the dock.
14
Getting Started
2 3
1
MENU SYNC
TIME
OK
SET
STANDBY INPUT SLE EP
SNOOZE/DIMMER
MEMORY
VOL+
VOL
-
13
1.The unit will automatically switch to standby mode once the power source is connected. The display will show the current time in standby mode.
2.Switch on the unit from standby mode to playback mode by pressing the STANDBY button.
3.Press the STANDBY button again to switch off the unit from playback mode to standby mode.
Selecting the Input Source
5 6
4
7
8 9 10 11 12
In playback mode, press the INPUT button to select the desired audio source, FM, iPod/iPhone /iPad or AUX.
Adjusting the Volume
In playback mode, press VOL+ and VOL- to adjust the volume. The volume level range from 00 to
32.
Time Synchronization
5.Press again and press or to select one of BUZZ, FM RADIO or iPod/iPhone/iPad as the wake-up alarm, when the alarm mode icon will appear on the display.
  ● When the alarm is set to FM radio, the radio frequency last used will be used as the alarm radio
frequency.
  ● If in case the iPod/iPhone/iPad wake-up mode is selected and no iPod/iPhone/iPad was plugged
in, the BUZZ will sound instead.
6.At any stage above, if no key is pressed for about 5 seconds, the last selected value is automatically saved and exit.
7.The setup of ALARM2 is the same with ALARM1.
When the rst time using this unit or after a power interruption, you can synchronize the time with iPod/iPhone/iPad. Plug your iPod/iPhone/iPad, switch to playback mode, and select iPod/iPhone/iPad mode. The time on the display ”12:00” is ashing. Press and hold the MENU button until the display shows “SYC”. Then the same time with iPod/iPhone/iPad will show on the display.
Tips: Not all the models of iPod/iPhone/iPad support time synchronization function. The supported models include:
● iPod touch (4th generation)
● iPod touch (3rd generation)
● iPod touch (2nd generation)
● iPod touch (1st generation)
● iPod nano(6th generation)
● iPod nano (5th generation)
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad
● iPad 2
Setting Clock Manually
1.In standby mode, press and hold the TIME SET button until “12H” ashes. Press or to set “12H”(12 hour format) or “24H”(24 hour format).
2.Press TIME SET, and “hour” ashes.Press or to set the hour.
3.Press TIME SET again, and “minute” ashes.Press or to set the minute. At last press TIME SET to conrm.
4.At any stage above, if no key is pressed for about 5 seconds, the last selected value is automatically saved and exit.
Tips:The alarm volume will increase gradually.
Snooze Function
1.Press SNOOZE/DIMMER button to silence the alarm sound temporarily for about 9 minutes, the alarm will active again after 9 minutes lapse. The snooze function is repeatable for 60 minutes.
2.To switch the alarm sound off, you can press or button.
Dimmer Function
Three levels of brightness are available by pressing SNOOZE/DIMMER.
High(default)MiddleLow
Middle
Setting Alarm
1.The unit has two sets of alarm, (ALARM1) and (ALARM2).
2.In standby mode, press button and icon will appear on the display. ALARM1 is activated. Press again to cancel and icon disappears.
3.In standby mode, press and hold until “hour” ashes. Press or to set the hour.
4.Press again, and “minute” ashes.Press or to set the minute.
Sleep Function
This function switches the unit from playback mode to standby mode after the specied time.
1.Press the SLEEP button repeatedly to select the sleep time. The cycle goes “OFF” means no sleep function.
9060301510→5
OFF
2.After the sleep mode is activated, the SLEEP icon will appear on the display. And press the SLEEP button to display the remaining time before switching to standby mode.
FM Radio Mode
Tuning Radio Stations
1.In playback mode, press INPUT button to select the FM radio mode.
2.Tune to the desired radio frequency by pressing the or .
3.Press and hold the or for 2 seconds to automatically scan until a strong signal is found(a station is received).
Storing Radio Stations
This unit can store up to 20 preset stations.
1.Press MEMORY button, the channel number begin to ash.
2.Press or to choose the desired channel to store.
3.Press MEMORY button to conrm and store the radio station.
4.In FM radio mode, press or to select the preset stations(channel number).
iPod/iPhone/iPad Mode
1.When docked, the iPod/iPhone/iPad will be charged automatically.
2.In playback mode, press INPUT button to select the iPod/iPhone/iPad mode, and the iPod/iPhone /iPad will automatically begin to play.
● Press to play or pause the playback of music .
● Press or to select previous or next song; press and hold to fast-backward and fast-forward.
● Press MENU, , and OK buttons to control iPod/iPhone/iPad menu.
Tips:The MENU button has no function with iPad.
AUX Mode
1.Connect the audio output jacks of your auxiliary sound source (PC, MP3, etc.) to the AUX IN jack on the back panel of the unit.
2.In playback mode, press INPUT button to select AUX mode.
Specications
General information
DC power: 5V 3A
Amplier
Rated Output Power: 2 x 3W RMS Frequency Response: 100~15KHz,±3dB Signal to Noise Ratio: >65dB Aux Input Sensitivity: 0.5V RMS
FM
Tuning Range: 87.5-108 MHz Tuning grid: 100 KHz Search Sensitivity: <28 dBf Total Harmonic Distortion: <1.5 % Signal to Noise Ratio: > 55 dB
Speakers
Speaker Impedance: 4 ohm Speaker Driver: 50mm Sensitivity: >82dB
Product specications is subject to change without prior notice.
Troubleshooting
Warning: Never remove the casing of this apparatus. To keep the warranty valid, never try to repairthe system yourself. If you encounter problems when using thisapparatus, check the following points beforerequesting service.
No power.
● Make sure that the DC power is connected properly.
● Make sure that the batteries are inserted correctly.
No sound.
● Make sure the iPod/iPhone/iPad is securely connected.
● Adjust the volume.
The iPod/iPhone/iPad cannot be operated with this unit.
● Make sure the iPod/iPhone/iPad is securely connected.
The iPod/iPhone/iPad cannot be charged.
● Make sure the iPod/iPhone/iPad is securely connected.
The screen shows “This accessory is not supported by iPad”(iPod or iPhone).
● Make sure the iPod/iPhone/iPad is securely connected.
● Reconnect the DC power.
Key not functioning.
● Reinsert the backup batteries and reconnect the DC power.
Poor radio reception.
● Increase the distance between the unit and your TV or VCR.
● Fully extend the FM antenna.
The clock ashes “12:00” due to a power interruption.
● The battery is low. Replace the battery.
The radio, iPod/iPhone/iPad or buzzer alarm does not sound at the preset alarm time.
● Check that “ ” or “ ” is properly displayed.
● The alarm volume increase gradually.
Loading...