PYLE Audio PDCD940MP User Manual

PDCD940MP

PROFESSIONAL DUAL CD MP3 PLAYER WITH SEAMLESS LOOP & SOUND EFFECT

TABLE OF CONTENTS

NOTE ON USE …………………………………………………………………2 FOR SAFE AND EFFICIENT OPERATION ………………………2 DESCRIPTION OF THE FUNCTIONS ……………………………3

FUNCTION OF THE MAIN UNIT………………………………………3 FUNCTION OF THE CONTROL UNIT…………………………………4 LCD INSTRUCTION …………………………………………………6 PARAMETER SETTING INSTRUCTION ……………………………7 CONNETIONS ………………………………………………………9

BASIC OPERATION ………………………………………………10

LOADING AND EJECTING THE DISC………………………………10 TRACK SKIP ………………………………………………………10 ANTI SHOCK MEMORY ……………………………………………11 MATCHING THE BEATS PER MINUTE ……………………………12 BEAT MATCHING USING PITCH BEND……………………………12

OPERATION OF CUE AND LOOP ………………………………13 BEFORE SWITCHING OFF THE POWER ……………………… 14 TROUBLESHOOTING GUIDE ……………………………………14 USB DRIVER & DJM PROGRAM………………………………….15

- 1 -

NOTE ON USE

BE CAREFUL OF HIGH TEMPERA-

TURE

TO AVOID DUST & MOISTURE TO AVO ID PLA CIN G ON UN-

IF OUT OF WORK, CONTACT

SALES AGENCY IMMEDIATELY

KEEP AWAY FROM TV &

MAGNETISM

This product shall not be treated as household waste. Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the environment and human health, which could otherwise

be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural

resources. For more detailed information about recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

For Safe and Efficient Operation

• Select the installation location of your unit carefully. Avoid placing it in direct sunlight. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep away from sources of hum such as transformers or motors.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The MAINS plug is used as the disconnected device, the disconnect device shall remain readily operable.

WARNING: The user shall not place this apparatus in the confined area during he operation so that the mains switch can be easily accessible.

• Do not use this compact disc player where there are

extremes in temperature ( below 41 o F/5 o C or exceeding 95 o F/35 o C )

• Do not open the cabinet as this might result in

damage to the set or electrical shock.

SAFETY CERTIFICATION

DO NOT USE CHEMICALS

STABLE LOCATION

DO NOT OPEN THE CASE CARE WITH THE POWER CORD

• Be sure your hands are clean when handing discs. Never insert a disc which has a crack on its surface.

• When disconnecting the power cord form the AC outlet, always grasp it by the plug. Never pull the cord.

• Do not use force when operating the switches and buttons.

• Before moving the set, be sure to disconnect the power cord and all connecting cables.

• To keep the laser pickup clean, do not forget to close the disc tray.

• Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

• Keep this manual in a safe place for future reference.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATIO EXPOSURE.

CAUTION

Laser Diode Properties Material: Ga.-Al-As Wavelength: 755-815 nm (25 Laser Output: Continuous Wave max. 0.5mW

DESCRIPTION OF THE FUNCTIONS

Function of the Main Unit :

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE COVER (OR BOTTOM SCREWS). NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICING PER- SONNEL.

- 2 -

POWER

1. Disc Tray

The disc is placed on this tray. Pressing the disc tray open/close buttons e will open or close the tray.

2. START/PAUSE

This connector is used for fader start; connect it to a mixer, and remote control the “START/PAUSE” by moving the fader of mixer

3. DIGITAL OUT

The digital from each CD player is output from these jacks. Connect to the line input of the D/A Amplifier

4. LINE OUT (Output Jacks)

The audio from each CD player is output from these jacks. Connect to the line input of the mixer.

. CONNECTOR PORTS

The 8-pin termination permits the connection of the main

unit to the control unit 1.

6. EJECT BUTTON

Press to eject the disc.

NOTE: Disc won’t be ejected unless stop or pause

button has been push first.

7. POWER (Power Switch)

Press the power switch to turn the unit on, and the LED indicator will be light. To switch the POWER off by pressing the POWER switch again

8. AC INPUT

Connecting this power cord into an AC wall outlet with

the proper AC voltage.

9. TACT / LOCK / CUE PLAY option

Select the type of switch in the mixer for FADERSTART

wire remote control.

- 3 -

Function of the Control Unit

1. EJECT BUTTON

Press to eject the disc. Note: Disc can’t be ejected unless the stop or pause button has

been pushed first.

2. TIME / STOP BUTTON

This button switches the time display between total remaining time,

each remaining time and elapsed playing time. The unit will be in the “stop” mode if you continue pressing the button for 3 seconds.

3. CONT./SINGLE BUTTON ( OUTRO)

To press this button it can switch between auto cue single and

continue. The selected mode is indicated on the display.

*AUTO CUE SINGLE - After each track, the unit pauses at the

beginning of next track. The playback starts from audible point.

*CONTINUE -To play all tracks continually.

OUTRO - The unit will play the last 30 seconds of each track. Press

the button for 3 seconds to switch OUTRO function.

Note: OUTRO is not available for MP3 music.

4. Multi functions / DIRECT ACCESS BUTTONS

* Multi function off

The buttons are direct access keys (0~9). To select the number of the

track you would like to play.

* Multi function ON

z Number 0 : CUE Point Memory Clear Function。

Hold these two buttons for 2 seconds to clear CUE Point data.

z Number1：CUE Point Store Function。

z Number2：Recall CUE Point Function。

z NO function for Number 3-7

LCD shows[ clear memory ] for 2 sec

Record new CUE Point Information , and LCD Display

shows

□□□/○○○ ] for 2 seconds.

[ Store

□□□：Present saved CUE point number.

○○○：Remain memory volume.

The function can be ON only in PAUSE mode and use JOG

WHEEL to select the Cue points. After the CUE point is found, press Play button to activate.

LCD Display shows [ Buffer CUE ]

Sec。

z Number8： ID3 display select Press the button to switch ID3 display item (File name / Title / Album / Artist )

z Number9：Folder/File select button

Press these 2 buttons to enter the Folder/File select mode. Use Skip button to search the Folder/File.

5. KEY ON/OFF SWITCH

Press the button to switch KEY mode on or off.

z KEY OFF: The display shows the “KEY” in blinking, and

the key changed according to the pitch change. The key parameter adjustment is not in effect

z KEY ON: The “KEY” lights on the display, turning the

SCOPE knob to adjust the key. Slide the pitch slider will also change the key.

z KEY LOCK: Press the SCOPE knob to lock the key as

set, sliding the pitch slider does not change the key.

6. ON/OFF BUTTON (PITCH)

Press the button to be PITCH ON mode, press it again on the PITCH ON mode, and blinks with unit on the PITCH OFF mode.

7. PITCH BUTTON

Select the pitch change range from ±4%, ±8%, ±16%, ±100% (for CDDA), ±4%, ±8%, ±16% for (MP3 Playback).

The playback speed will change when you move the pitch control slider.

8. RELAY

Press the “RELAY” button to activate. When one unit is in play mode, and the other unit is in “pause” mode; pause the playing unit, the other unit will automatically start to play (the button will blink)..

9. PITCH BEND + / - BUTTON

When each of the two CD players is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the “ + “button. While pressing the “ – “ button, the pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched.

- 4 -

+ 9 hidden pages