Time
Intelligent Step Filter Function
7 Days Data Memory Record
Target Step Alert Alarm
Exercise Time
Total Distance
Total Calories
User Setting
USB PC Link Interface Program
Low Battery Detection
Energy Saving Function
3D SENSOR FROM USA –
MEASURES YOUR MOVEMENT ACCURATELY
BACK LIGHT
- The 3D technology in the accelerator is an accelerometer sensor
that detects and measures acceleration in walking or running.
- 3D Sensor has intelligent step filter function-steps which only
starts counting when the unit detects continuous movement for
over 10 seconds.
- 3D Sensor allows users to customize to their specific body type for
Walking/Running style.
PERSONAL TRAINER
Thank you for choosing AnyRun as your personal trainer. In order
to make the best use of this device, please read the instruction
manual carefully. Do not discard keep the manual for future
reference.
Important: Please note that the watch is NOT a medical device and
is not to be used as such.
CONTENTS
Getting Start ………………………………………………………………… 2
Using the unit function……………………………...……………………. 2
Mode Flow ………………………………………………………………...... 3
Step Counting Mode……………………………………………………….. 3
Distance Mode...…………………………………………………………….. 4
Calories Burnt Mode ……………………………………………………… 4
Exercise Time Mode …….………………………………………………… 4
Memory Data Mode……………………………………………….……….. 5
Total Mode…………………………………………………………………… 5
User Setting ……………………………………………………………….... 6
Download/Installation PC-Link Program ………………………………8
PC-Link Program Operation………………………………………………. 9
Installing the Battery………………………………………………………. 12
Specification………………………………………………………………….. 13
Caution………………………………………………………………………… 13
IMPORTANT!
For energy saving purposes, the watch unit will automatically switch off
if no buttons are pressed for 3 minutes. To turn it on again, press
any keys or sensor receive motion. The pedometer mode will also
be off during transportation for energy saving purposes.
IDEAL PLACEMENT
NORMAL WALKING MEASUREMENT
Before you track the number of steps you take as you go about your
normal daily life, you need to preset the following personal information
before using the unit.
The Units You Want To Use
Your Normal Walking Stride Length
Your Current Weight
Set your Target Distance
16. The adjustment should be 1,000 steps for each increment or
decrement, when target is below 1,000 steps, it will become 100
steps for each adjustment
17. There are 10 icons show the percentage of your step to target steps.
When you finished the target steps (100%), the icon will be full of 10
icons and will flash together with a beeping alarm for 30 seconds
Note:
No buttons pressed or held for 60 seconds will automatically trigger the
unit to return to step counting mode.
DOWNLOADING/INSTALLATING PC-LINK PROGRAM
Please visit our website at http://www.anyrun.com/k515m.htm
to download the interface program or from the provided CD
PROGRAM PROVIDES:
Full processing and analysis of your exercise data
History of your personal training data
Graphical analysis of data information
Email data file with Excel Format
PC-LINK PROGRAM OPERATION
First User:
1. Click “ New “ button to create a new USER NAME and enter your
personal information then save it for confirmation
PC LINK COMMUNICATION
1. Unit will automatically upload the data to PC once plugged into the
computer
2. Login the program and enter to the Main Screen
3. Click any button to select the desired report or data.
Step – Distance – Calories – Exercise Time
4. Press the SEND button to export the excel data file by email.
INSTALLING THE BATTERY
The Watch uses 1 piece CR 2032 batteries. Use only the recommended
batteries.
NOTE: Changing the battery will erase the data in the watch previously
input into the device and you can then/will need to re-set the watch all
over again.
1. The battery compartment is located at the back of the unit
2. To install/replace the battery, unscrew the battery compartment
with the screw driver and simply slide afterwards
3. Take out the old battery and dispose of properly
4. Gently place a new battery into the battery slot of the battery
compartment, make sure that the poles are correctly placed
Screw back the battery compartment, when finished as in the diagram
below
IMPORTANT BATTERY INFORMATION
Battery installation and removed should be performed by an
adult
Use only batteries recommended in this instruction sheet
Be sure to install the batteries with the correct polarity, as
indicated
Remove all batteries when replacing the old batteries with new
batteries
Only batteries of the same and equivalent type as
recommended are to be used
Do not short-circuit the supply terminals
Exhausted batteries should be removed from the product
Non-rechargeable batteries are not to be recharged
Rechargeable batteries are to be removed from the product
before being charged
Rechargeable batteries are only to be charged under adult
supervision
Different types of batteries, new and used batteries are not to