PYLE Audio PBT30M User Manual

200.00 mm

Establishing Bluetooth Link

After successfully pairing the PBT30M and the mobile phone, you may need to establish a Bluetooth link between them according to the operation manual of your mobile phone. To establish the link, press S1 shortly. Use Nokia 6130i as an example, the mobile phone will show “Do you accept PBT30M request for connection?” Select YES to establish the link. You are ready to make and answer calls on

PBT3 0M

User Manual

Bluetoo th Headset

the Headset. For other phones, please follow the operation manual to establish the link. You are ready to make and answer calls on the Headset.

Please note:

If the headset is powered down, turning on the headset will auto reconnect the last used device. If the headset is disconnected but powered on, press S1 shortly to connect the link again. If there is abnormal loss of link happened (e.g. out of range), the headset will automatically try to reconnect the mobile phone several times. If the mobile phone cannot locate the network signal (e.g. out of reach) , alert tone will be heard every 5 seconds in the headset. Not every mobile phone supports no network signal alert feature. If there is no Bluetooth connection for more than 1 hour, the headset will switch off automatically.

Answering Incoming Calls

When you wear the headset, an incoming call is present, the PBT30M headset will ring. Pressing S1 will answer the call. Attention: Some phones put the Bluetooth connection into Standby Mode if it has not been used for some time. When there is phone call in, only the mobile phone rings and it will take a few seconds to transfer the call to headset. You have to wait until you hear the ring tone in headset. If you press S1 to take the call before you hear the ring tone in headset, the headset will try to establish Bluetooth connection. This will cause connection conflicts between mobile phone and headset.

Hea dset pictu res.. ..... .... ..... ..... ..... .... ..... ..... ......... ..... ..... ......... ..... ..... ......... ..... ..... .... ..... 1

Cha rging the b atter y..... ..... ..... .... ..... ..... ..... .... ..... ..... ..... .... ..... ..... ......... ..... ..... ......... ..... .1

Turn ing on t he Headset. ..... ..... .... ..... ..... ..... .... ..... ..... ..... .... ..... ..... ......... ..... ..... ......... ..... .1

Turn ing off t he Headset. ..... ..... .... ..... ..... ..... .... ..... ..... ..... .... ..... ..... ......... ..... ..... ......... ..... .1

Hea dset i n Pair ing Mo de... ......... ..... ..... .... ..... ..... ..... .... ..... ..... ..... .... ..... ..... ......... ..... ..... ..2

Est ablis hing B luetooth Li nk.. ..... ..... ......... ..... ..... ......... ..... ..... .... ..... ..... ..... .... ..... ..... ....... .3

Ans we rin g in co min g ca ll s.. .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... 3

Tran sf er rin g calls. .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... 4

270.00 mm

Mut in g the micr ophon e. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .4

End in g ca lls.. .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... 4

To make a new c all usi ng v oi ce d ial.. .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... 4

Red ia lin g l as t di al ed num be r. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... 5

Rej ec t a ca ll. .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .5

Adj us tin g s pe aker v ol ume.. .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ..... .. ... .5

To we ar th e hea ds et....... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. 5

Low -b att er y indi ca tio n. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... 6

Bat te ry rec ha rgi ng .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. 6

LED St at us... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... 7

Voic e Ov er Int er net Pr oto co l (Vo IP ) App licat io n.... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ....8

FCC Inte rfe re nce statem en t ... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. 9

Dec la rat io n o f C onfor mi ty. .. .. ... .. ..... .. ..... .. ... .. .. ... .. ..... .. ..... .. ... .. .. ... .. .. ... .. ..... .. ... .. .. ... .. .. 11

On/Off (S1)

Volume Dow n(S3 )

Volume Up (S 2)

DC Socket

● Charg ing the batte ry

Thank y ou for buying t he new PBT30M H eads et with B luet ooth wi rele ss technolo gy. Befor e first t ime use, it is im portant to ch arge t he batt ery fo r 8 hours .

● Turning on t he Headset

While t he Headset is p owered down , pres s and hol d S1 unt il blue LED tur ns on. A low tone follo wed by a high ton e will i ndica te tha t the PBT 30M is p owered up. Afte rward , blue L ED will fl ash every 3 sec onds.

● Turning of f the Headset

While t he Headset is p owered up, pr ess an d hold S1 u ntil r ed LED tu rns on . A high tone follo wed by a low tone w ill in dicat e that t he PBT3 0M is po wered down.

LED

Speaker

Microphone

Transferring Calls (For Nokia 36 50 or equiv alent models)

When you are in sessio n, calls can be trans ferred fr om the Bluetooth ph one to the HS a nd from the HS to the Bluetoot h phone. To transfer a call fro m the Bluetooth phone to the HS: p ress S1 once, the call will be transferred to the H S. To transfer a call fro m HS to the Bluetooth phone, ple ase follow the oper ating ins tructions of your phone.

Muting the microph one

To mute the micropho ne during an active c all press b oth S2 and S3 buttons s imultan eously for about a second and the m icrophone will be m uted. A periodic beep tone wil l be heard wh en the mute function is act ive. To end the mute functi on: When th e microphone is mut ed, press b oth S2 and S3 buttons simultaneously. Mute function i s ended and t he periodic beep to ne will stop.

Ending Calls

While a call is in sessi on on the Headset pre ssing S1 wi ll disconnect the c all. After the c all is disconnected, th e blue LED will flash n ormally a gain.

To make a new call usi ng voice dial

Make sure the voice di aling function is s et up in the mo bile phone and it is within the range of the Headset. Press S 1 on the PBT3 0M shortly. There is a beep tone on the hea dset.Th en use your recorded voic e commands ( eg. By saying the nam e of the pers on). The call will be connected in a few sec onds.

Red ia li ng l as t di al ed number ( Mo bi le p ho ne s wi th Handsf re e pr of il es o nl y )

To redi al t he l as t nu mb er, p ress an d ho ld S 3 un ti l 4 to ne s ar e heard . It i nd ic at es t he r ed ial is ac ti ve .

Rej ec t a ca ll ( Mo bi le p ho nes wit h Ha nd sf re e pr of il es only )

To reje ct a c al l at t he t im e th e PBT30 M ri ng s, p re ss a nd h ol d S1 unti l yo u he ar 2 t on es .

Adj us ti ng S pe ak er Vol um e:

Whe n a c all is o ng oi ng, pr essing and r eleasin g S2 wi ll i nc re as e th e sp ea ke r vo lu me an d pre ss in g an d releasi ng S3 wi ll decr ea se the sp ea ke r vo lu me on th e He ad se t. Ther e is a key tone t o ind ic at e v ol um e i nc re as e o r d ec re as e. Ho wever, a warnin g ton e w il l be heard whe n th e vo lu me l ev el r ea ches it s ma xi mu m or m in im um .

To wea r th e he ad set

Mak e su re t he m ic ro ph on e is poin ti ng t ow ar ds y ou r mo uth.

Head set i n Pai rin g Mod e

 Make s ure t he PB T30 M is fu lly ch ar ged an d the charging cab le is di sconne cted from it bef ore pair ing st arts. While the PBT30M i s pow ere d off , press and hold S 1 unt il re d and bl ue LEDs flas hin g alt ern ate ly. It in dic ate s tha t the He adset is in Pai rin g Mod e.  Foll ow th e ope rat ing i nst ruc tio ns fo r you r Blu etooth mo bil e pho ne to st art the pairing proces s. Typica lly, th is ha s to be d one by g oing to a set up or co nnect menu and then s ele cti ng th e opti ons t o dis cov er Bl uet oot h dev ice s. Bl uetooth may take se ver al se con ds to e sta bli sh a conn ect ion .  Your pho ne' s dis pla y should indic ate t hat i t has f oun d the “ PBT 30M ” hea dse t and a sks if you want t o pai r it. You sh oul d con fir m thi s. The ph one's di splay would pr omp t you f or a pa ssk ey or PIN . Ent er a se que nce of “ 0000”.  The he ads et LE D wil l fla sh bl ue ev ery 3 s eco nds , ind icating succ ess ful pa iring. Us ually the phon e wil l als o ask wh ether you want t o cha nge t he he ads et' s nam e. We re com men d to ke ep the de fau lt na me PB T30 M ins tea d of ch ang ing i t.

 If pai rin g doe s not o ccu r as ex pec ted :Tur n off bo th th e hea dse t and t he ph one an d wa it for 10 seco nds . Turn on t he he adset and pho ne ag ain an d repeat all steps fr om be gin nin g. Pa iri ng does au thoriz e the de vices like mo bil e pho nes an d headsets with eac h oth er an d onl y nee ds to be pe rfo rme d onc e.

Low -b at te ry i nd ic at io n The P BT 30 M LE D wi ll f la sh r ed i ns te ad o f bl ue w he n th e ba tt er y is l ow. T he re w il l also a short beep periodically. Afte r th is i nd ic at io n yo u st il l ha ve u p to 1 5 mi nu te s ta lk t im e. When the b atte ry l ev el i s to o lo w, th e He ad se t wi ll automatic ally power off . It c an no t be p ow er ed o n again unless the charger is connected or th e ba tt er y is s uf fi ci en tl y ch ar ge d.

Battery recharging

To rech arge the b at te ry, p ut t he h ea ds et o n ph on e ho ld er. D ur in g re ch ar gi ng , th e LE D shows a ste ady re d li ght. Whe n th e ba tt er y is f ul ly c ha rg ed , th e in di ca to rs o f re d li gh t wi ll b e of f .

(1) A/C ch arging (2) C ar c ha rg in g

The a ch ievable talk tim e and st an dby ti me f or t he P BT 30 M ca n va ry w it h di ff er en t Bl ue to ot h mobile phones due to diff er en t im pl em en ta ti on o f po we r do wn m od es . Keep th e headset away fro m fi re t o av oi d da ma ge .

Note

Material: 80g Woodfree Paper

PART NO.: MCB-8127020-1A

DRAWN:

DESCRIPTION:

Limingzan

#User Manual For PYLE Logo

PAPER SIZE: A3

UNIT: MM

MODEL: 8127

In-Te ch Electr onics Ltd.

DATE: 20071204

SCALE: 1:1

● Led Sta tus

LED

1 x 3 sec. Blue

1 x 1 sec. Blue

Bli nk in g re d

Red LED o n

Red LED o ff

Red/B lu e Bl in ki ng

Remi ndi ng:

- For sa fet y rea son , ple ase d on' t lea ve th e hea dse t in car alone whe n cha rgi ng.

- When t he ba tte ry is l ow, t he LE D wil l not t urn o n unt il the headset is cha rge d up, w hic h may take s eve ral m inu tes .

USB Dongle and P BT30M Blue tooth Head set Voice Over Internet P rotocol (VoIP) Application

 Install Software for Blu etooth USB Dongle from the CD-ROM provided in the USB Dongle package. Note that the CD- ROM is not ava ilable in the PBT30M package.

 Plug the USB Bluetooth Dongle (purchased separately) into the USB socket of a PC.  Download from the corresponding websites and install Skype, MSN messenger,Netme eting,

Yahoo messenger, or ICQ application software in the PC.  Pairing: Put the PBT30M Bluetooth Headset into "pairing" mode. Start the Bluetooth software and pair the USB Dongle with the PBT30M Headset. The He adset pass key is "0000 ".  Connecting and Disconnecting: To co nnect the US B dongle, pr ess the S1 key o n the Headse t. To di sconnect t he Bluetoo th link, pre ss the S1 key ag ain.Afte r turn off and tu rn on the head set, you just need to press S1 key to e stablish the audio link with USB dongle if the USB dongle is the last used d evice.  Testing the Bluetooth L ink: After the USB Dongle is connect with the PBT30M Headset, the PC audio will be automatically routed to the "Bluetooth Audio" dri ver. Play some music on the PC by Windows Med ia Player or other music applications; you should be able to hear the music on the Headset. If you can't h ear it, then g o the "contr ol Panel " ->" S ound and Audio De vice Properties"-> "Audio"-> "Sound playback" select the "Bluetooth Audio" to activa te the link.  Now you can start using the VoIP application an d talk to your f riend thro ugh your Hea dset wirelessly and freely.  Connecting PBT30M Bluetooth Headset back to your Bluetooth mobile phone. Please follow the steps from ' Headset in P airing Mode' to 'Establishing Bluetooth Link'.

Sta tu s

Ready can be accessed by paired devices

Talking

Batte ry l ow ( ma x. 1 5 Mi nu te s le ft )

Under charging

Ful ly charged

Pairing-Mode

Sou nd Arou nd In c.

PBT 30M

The following company is responsible for this declaration:

Sound Around Inc.

1600 63rd Street Brooklyn N.Y. 11204, USA

Phone: 1-800-444-5671 718-535-1800 Fax: 718-236-2400

Blu et oo th Q ua li fi ed D es ig n ID : B0 13 21 8

128

Feder al Communication Commission

Inter ference Statement

This eq uipment has b een tested an d foun d to comp ly wit h the limits fo r a Class B digit al device, pursu ant to Part 15 of t he FCC Rules. Th ese li mits are desi gned to provi de rea sonab le prote ction again st harmful in terf erenc e in a res idential in stallatio n. This e quipment ge nerates, uses an d can radiate r adio freque ncy en ergy an d, if no t installed a nd used in acco rdan ce with the ins tructions , may cause har mful i nterf eren ce to rad io com municatio ns. However, th ere is no guar antee that in terferenc e will n ot occu r in a par ticular ins tallation . If this equipmen t does cause h armful inte rference to r adio o r telev isio n reception , which can be de term ined by t urni ng the equ ipment off and o n, the u ser is encour aged to try to co rrec t the int erfe rence b y one of t he follo wing measur es:

-Reori ent or reloca te the receiv ing an tenna .

-Incre ase the separ ation betwe en the e quipm ent an d receiver.

-Conne ct the equipm ent into an out let on a c ircui t diffe rent from tha t to whi ch the re ceiv er is conne cted.

-Consu lt the dealer o r an experien ced ra dio/T V tech nician for he lp.

This de vice compli es with Part 15 o f the FC C Rules . Oper ation is subjec t to the f ollowing tw o condi tions: (1)T his device ma y not ca use har mful i nterferen ce, and (2) thi s device must a ccep t any int erference r eceived, in clud ing int erfe rence that ma y cause undes ired o perat ion.

FCC C aut ion: Any chan ges o r modif ica tions n ot ex press ly ap prove d by th e party r esp onsib le for c omp lianc e cou ld void t he us er's au tho rity to o per ate thi s equ ipmen t.

IMP ORTAN T NO TE: FCC R adi ati on E xpo sur e St ate men t:

Thi s equ ipmen t com plies w ith F CC radi ati on expo sur e limit s set f orth fo r an un con tr oll ed env iro nment . End u sers mu st fo llo w th e spe cif ic o per ati ng i nst ruc ti ons f or sa ti sfy ing R F exp osu re comp lia nce.

Thi s tra nsm it ter m ust n ot b e co- loc at ed or o per at ing i n con ju nct ion wit h any o ther an ten na or tra nsm itt er.

FCC I D:N V6-CS 812 7

Enviro nment al

friend ly