Model:P15LCD
4:3 DIGITAL LCD-TV-Monitor
15” LCD TELEVISION
OPERATING MANUAL
www.pyleaudio.com
CONTENTS
1. PREFACE. ...........................................…....................…...............…………….
2. SAFETY PRECAUTIONS .................................................................…………
3. FRONT, BACK, CONNECTIONS OF LCD ....……………………………...
4. TV INSTALLATION GUIDE ............................................…………………...
4.1 CONNECTION ANTENNAS ..........………………………………...…..
4.2 AV VIDEO INPUT DRAWING ….....……….....….......….….…….….....
4.3 S-VIDEO INPUT DRAWING. .........................................…..……….….
4.4 PC (VGA) CONNEXION DRAWING ………………………….……….
5. CONFIGURATION OF THE LCD. ........……………………………………..
5.1 PICTURE SETTING. ………………………………………………...…...
5.2 AUDIO SETTING ………………………………………………………
5.3 SOURCE SETTING …………………………………………………….
5.4 TV PROGRAMMER SEARCH ..................……………..…..…...…..….
2
3
4
5
5
5
5
6
7
7
7
8
8
6. REMOTE CONTROLS INSTUCTIONS ……………………………………
A. Remote control instructions…………..…………………………………..
B. Battery Usage Caution ..........................................…..……………..….…..
7. ACCESSORIES ....................................................................……….…….……
8. TROUBLESHOOTING AND ADVICE ...............…......…...………………...
9. SPECIFICATIONS ...................................……………………………………..
1
9
9
10
10
11
12
1
1 PREFACE
Thank you for buying this TV ! Please read this manual thoroughly before operating the
monitor. Make sure the monitor was not damaged in transit. Should the monitor is
damaged, do no install it and contact your dealer. Check that you have all the accessories
according to the model.
2 SAFETY PRECAUTIONS
Preparation
Put the monitor on a stable surface.
Do not use the monitor with others fixations than those provided or
suggested by the manufacturer.
Do not place any material on the monitor.
Do not block or cover the ventilation openings on the monitor
If you have a wall mount, check that it is steady
Power source
The monitor must be plugged with a tension source of 110 volts and
60 Hz.
Connexion cables
Power cord and cables must be properly routed and protected to
prevent people from stepping on them and causing the monitor to
fall.
2
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids
to clean the monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by the manufacturer. Using inadequate spare parts can lead
to electric shocks, short-circuits fire or other incidents.
Departure in holidays
Unplug the LCD during lighting storms or when unused for long
periods of time.
3