10.4” TFT-LCD Monitor
w/Built-in DVD/CD/MP3 Player
PLDVD10M
Operation Manual
Table of Contents
Welcome! ----------------------------------------------------------------------- 2
Precautions ---------------------------------------------------------------------3
Installation
Installation ----------------------------------------------------------------------4
Operation
Monitor Section --------------------------------------------------------------- 5
Adjusting the display setting-------------------------------------------------5
DVD section --------------------------------------------------------------------6
Operate DVD by Remote control--------------------------------------------7
Preparing the Remote Control
Inserting the Batteries--------------------------------------------------------8
Using the Remote Control---------------------------------------------------8
Connections
Connection Diagram ---------------------------------------------------------9
Additional Information
Troubleshooting -------------------------------------------------------------10
Specifications ----------------------------------------------------------------11
1
Welcome!
Thank you for purchasing the 10.4" headrest TFT-LCD Monitor with
DVD Player. For Maximum enjoyment and prolonged life of the
DVD player, we strongly recommend that you read the instruction
manual carefully before attempting to operate the unit. Please store
this manual in a safe place for future reference.
Digital Video Discs are the best source of movies for your life.
The latest digital technology allows compression of an entire movie
onto one disc. DVD's provide greater picture clarity and sound fidelity
than any video player on the market.
* You can select PAL or NTSC system.
* In addition to normal screen mode, full screen and zoom
screen modes are also available.
* The low reflection liquid crystal panel reduces the glare
from outside lighting sources.
* You can manually adjust the brightness of the display according
to the prevailing light conditions of your surroundings.
* The backlighting control produces sharp contrast images
free from reversed or blurred colors.
* This unit has 1 Audio/Video output, for additional connection to
another monitor.
* In addition, this unit has a built-in IR transmitter of IR
wireless headphone. This Convenient feature allows you
to use infrared wireless headphones with this unit.
2
Precautions
To avoid the risk of serious injury or accident. Please read the
following precautions before installing and operating the unit.
On Safety
IMPORTANT: Always comply with your local traffic rules and
regulation.
▓ While driving
●The driver must not watch or operate the monitor. This is
a safety hazard and may cause an accident.
●The driver must not listen to or use the headphones.
It may be distracting and cause an accident.
If the driver wants to watch or operate the monitor at any time,
you must first park the car in a safe place before doing so.
▓ When operating
●Do not hang onto the monitor.
●Do not insert your hands, fingers or foreign objects into
the unit while the monitor is functioning. It may cause
injury or damage to the unit.
●Take care not to bump your head against the unit when
getting up from the back seat.
●Keep small articles, such as DVD Disks or Remote
Controls, out of the reach of children.
On Installation
●Installing this unit requires technical expertise. This unit
should be installed by a qualified technician or service
personnel.
●If you try to install this unit by yourself, do it properly, referring
to the installation and wiring diagrams in this operation manual.
Improper installation may result in a fire or an electric shock.
●Before installation, be sure to turn the ignition switch to the
OFF position or take the key out. Installing this unit with the
ignition on may cause battery drain or a short circuit.
●Do not damage any pipes, tubes, the fuel tank or electric
wiring when installing this unit. This can cause a fire.
If you drill a hole in car panels, make sure that any hidden
car parts will not be damaged.
●Do not use any nuts or bolts for safety devices such as
steering linkage, fuel supply braking systems. This can
cause a fire or an accident.
3
Installation
● Place the mounting bar on the poles of headrest and then tighten 4 long
screws until the mounting bar is fastening firmly to the headrest poles.
● Put the adapter on the face of L type mounting stand and screw it tightly.
● Slide the engagement nut into the slide bracket slot on the rear of the
monitor housing.
● Slide the engagement head on the monitor into the adapter of L-type
mounting stand and tighten firmly.
● Insert the L type mounting stand on the monitor into the mounting
bar and screw tight until the monitor is securely fastened to the
Mounting stand.
● Squeeze the clamp of engagement head and pull up to release monitor
from bracket.
4
MONITOR SECTION
1. POWER: Press "POWER" for ON/Off.
2. UP : Press "▲" to adjust volume up
3. IR SENSOR
4. LED
5.DOWN: Press "▼" to adjust volume down.
6. MENU: Press "MENU" to select OSD menu with ▲/▼ to adjust
all of functions.
ADJUSTING THE DISPLAY SETTING
Call the main OSD Menu by function button, scroll to the menu
as followed:
5
MA I N MENU
CU BS .1 = NT SC
H. S YN C = +15 .7 K Hz
V. SY NC = -6 0. 0Hz
BR IG HTN ES S
CO NT RAS T
CO LO R
HU E
SO UR CE
AU DI O
RE CA LL
EX IT
1
2
SOURCE
AUTO DETECT
VI DEO 1
VI DEO 2
RE TUR N
AU DIO
MU TE
VOLU ME
RE CAL L
RE TUR N
A. Source Selection Menu
B. Audio Input Selection Menu
DVD SECTION
To operate DVD by pressing the buttons on up panel:
1. POWER: Press the"POWER" button, insert the disc with printed side
facing up into the disc slot, the player starts playback automatically.
2. EJECT: Press"EJECT" button to eject the disc.
3. PLAY/PAUSE: Press once to "PAUSE" a play, press again to resume
continuous playback.
4. FORWARD: Press "FF" to forward to next chapter
5. REVERSE: Press "REW" to previous chapter
6. STOP: Press the "STOP" button to stop the unit playback,
when press the "PLAY" buttons it will resume playback to the last scene
you were watching. If you press the "STOP" button twice, it will stop
the playback and go back to the initial Track/Chapter.
6
Operate DVD by Remote Control
1. POWER: To turn the unit ON or OFF.
2. MUTE: Turn off sound.
3. AUDIO: Changes the AUDIO soundtrack
on multi-audio soundtrack DVD disc.
4. OPEN/CLOSE: Open or close disc tray.
5. LANGUAGE: Choose different output
language.
6. 0-9: Choose number key
7. ANGLE: Changes the viewing angle on
multi- angle DVD disc.
8. SUBTITLE: Select or cancel subtitles.
9. EXIT: To exit selection
10. TIMER: Time indication
11. SETUP: Menu setup.
12. VOL-: Decreases current DVD Player
volume
13. DISPLAY: Display statistical disc
information during playback.
14. II: Press one time to stop
15. I<<: Go back last chapter
16. <<: RFV to reverse rapidly.
17. RETURN: Return to disc menu play
back.
18. REPEAT: Repeat playback for the
current chapter.
19. PROGRAM: Arrange program.
20. ZOOM: Enlarge the picture
21. TV/AV: Switch TV / AV button
22. FM: Adjust the receiving FM frequency
ency on radio 87.7MHz /87.9MHz/
88.3MHz/88.7MHz
23. DOWN: Decreases selected OSD function.
Also decreases monitor's volume.
24. UP: Increases selected OSD function. Also increases monitor's
volume.
26. CH+: TV channel choices
27. ENTER: Confirm the Track/Chapter selected with the number ke y or
selected with the cursor buttons on screen.
28. VOL+: Decreases current DVD Player volume
29. CH-: TV channel choices
31. STOP: Stop play
7
32. PLAY: Press one time to play DVD function.
33. >>I: Forward to next chapter
34. >>: Press next to skip to the next track
35. BOOKMARK: Memory play
36. A-B: Repeat play segment. Press once to set
37. FORMAT: Switch video output PAL/NTSC.
38. TITLE: Display the TITLE menu that is stored in the DVD disc.
39. DVD/TV/Monitor: Switch DVD /TV/ modulator button.
40. MENU: Enter to menu playback.
41. MODE: Switch video input AV1/AV2
Selecting the FM frequency of FM modulator
1. 4 LED lamps indicate 4 applicable transmitting
frequencies outputs: 87.7MHz / 87.9MHz/
88.3MHz / 88.7MHz
2. The red LED lamp is power on indicator
3. Select the applicable transmitting frequency
by the select button respectively from
87.7MHz / 87.9MHz / 88.3MHz / 88.7MHz
4. Adjust the receiving FM frequency on radio
and attain the best reception according to the
corresponding frequency
Inserting the Batteries
1.Open the battery compartment cover.
2.Insert the new batteries. Make sure that the positive and
negative terminals of the batteries are properly followed.
3.Close the cover Battery: two AAA size batteries.
8
Using the Remote Control
Face the remote control towards the
player front face IR mark
(remote control signal receiver).
Operation angle: About 30 degrees
in each the directions from
the front of the IR mark.
Connection Diagram
Refer to the connection diagram for the proper connections.
You can make connections shown as below. Please ask a qualified
technician for assistance on any other connections.
1.On a towel or soft cloth, gently place the monitor unit "face down"
on a stable work surface.
2.Locate the pigtail with the DIN connector.
3.Connect the DIN connector to the interface cable provided.
4.Connect the RED wire to the positive (+) battery terminal.
5.Connect the BLACK wire to a chassis electrical ground point.
6.Connect the cable with RED RCA jack to Audio Input and Yellow
RCA jack to Video Input Sources for your Video Program material.
7.In case of Video output, connect an RCA cable on the interface
cable box.
9
TROUBLE SHOOTING
Symptom and Solution:
When having problem with the unit, please check this list for a
possible solution before asking for service.
Symptom
Reason
Solution
No Power
Connections are bad
Battery is bad
Ignition is OFF
Check all cables
Check the battery
Switch the ignition to ON
No picture
Connections are bad
Monitor is in incorrect setting
Check all RCA connections
Setup Monitor in correct mode
No Sound
Connections are bad
Audio output setting is incorrect
Mute is ON, or Volume is 0
Check all audio connections
Setup audio output correctly
Press Mute, or increase
volume
Distorted Picture
Disk is dirty or damaged
You are in fast forward or fast
Reverse mode
Clean disk, or change disk
Press PLAY to resume normal
playback
Luminance Unsteady,or Picture
with Noise
Circuitry Influence
Bad connection
Connect source directly to
monitor
Check all cables
Unable to Play
No disk is loaded
Disk is bad or dirty
Disk is upside down
Parental Lock is on
Menu is active
Insert a disk
Replace the disk or clean it
Insert disc with the label side
facing up
Remove or change parental
settings
Press setup to remove menu
Keys do not
function
Power wave or other normal
phenomena( such as static)
Switch the unit off and on
again
Remote control
does not work
Remote control is too far away
From the DVD, or objects are
Blocking its path
Batteries are exhausted
Use the remote control within
7 meters, taking care to point
at it directly or within a 30
degrees angle.
Replace batteries
DVD unable to
play When press
the power on
DVD main board doesn't drive
It have to shut down power
system and then re-start again
10
11
SPECIFICATION
DVD PLAYER
Power Supply DC: 12V
Power Consumption 25W
Dimension 26cm x 23cm x 4.5cm
Video System NTSC/PAL
LaserSL Beam, wave length 650nm, 780nm
Frequency ResponseDVD Audio 45KHz PCM4 Hz~22Hz
96KHz PCM4 Hz~44KHz
Audio CD 40Hz~20KHz
S/N Ratio >90dB
Rotating Ratio Within measurable range
Operation Condition Temperature 0~40
Operation status: horizon
MONITOR
Screen Size 10..4 Diagonal
Display Format 800 (H) x 600(V)
Brightness 150 CD/
Video Input 1V p-p, 75ohms
Audio Output Power 1W (MAX)
ACCESSORIES
▓Guarantee Card
▓Remote Control
▓Audio / Video Cable
▓Instruction Manual
▓Battery
▓Bracket
Loading...