Pyle View PLD175TBT Instruction Manual

Download

Analogue TV Receiver

Flip Down Detachable Front Panel

Anti-Shock Mechanism

A/V Output & A/V Input

CAR VIDEO SYSTEM

Sub-woofer Function

AM/FM 2 Band Radio

PAL/NTSC Color System

Instruction Manual

PLD175TBT

Bluetooth Function

/CD-RW Compatible

DVD/VCD/MP4/MP3/CD/CD-R

WWW. PYLEAUDIO.COM

CONTENTS

Trouble Shooting

Bluetooth Function Tipwizard

Digital Setup

Audio Setup

Language Setup

System Setup

Setup

Attachment

AV In Operation

Operation of USB device

Data Disc Play Operation

DVD/VCD Operation

CD/MP3 Operation

Radio Operation

General Operation

Using The Detachable Front Panel

Preparing The Remote Control

Location and Function of Keys

Operation

Wiring Diagram

2. DIN REAR-MOUNT (Method B)

Installation

1. DIN FRONT-MOUNT (Method A)

Safety Information

Operation of Memory Card

TV Operation

Specification

CAUTION: Automotive DVD player is a class 1 laser product. However this car DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the car DVD player correctly as instructed. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself. Refer servicing to qualified personnel.

WARNING:

- To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

- To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories.

- This device is intended for continuous operation.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by macro vision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macro vision Corporation. Reverse engineering or disassembly is prohibited.

Region Management Information

Region Management Information: This automotive DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this car DVD Player, this car DVD Player cannot play this disc.

Handling and Cleaning

- Dirt, dust, scratches and warping discs will cause disoperation.

- Do not place stickers or make scratches on discs.

- Do not warp discs.

- A disc should always be kept in its case when not in use to prevent from damage.

- Do not place discs in the following places:

1. Direct sunlight.

2. Dirty, dusty and damp areas.

3.Near car heaters.

4.On the seats or dashboard.

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, Use a soft cloth slightly moistures with isopropyl (rubbing) alcohol. Never use solvents such as benzene, thinner or conventional record cleaners as they may mar the surface of the disc.

Note:

A disc may become somewhat scratched (although not enough to make it unusable) depending on the way it is handled and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.

Safety Information

Discs you can play You can playback the following discs12CM on the receiver: DVD VIDEO/DVD AUDIO

VIDEO CD/AUDIO CD

MP3/WMA/JPEG/MPEG4

Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the below. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.

Label side up

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Rough spots on outside edge

Ball point pen or pencil

Rough spots on inside edge

Notes:

- Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

- Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

- Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

- Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

- Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

- If installation angel exceeds 30°from horizontal, the unit might not give its optimum performance

- Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either from 'Front' (conventional DIN Front-mount) or 'Rear' (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

Installation

Take Out Screw Before Installation

Before install the unit, please remove

the two screws.

Take out screws before installation

1. DIN Front-Mount(Method A)

Installing the unit

182

(Fig.1)

1. Dashboard

2. Hoder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and ben them inwards to secure the holder in place.

3. Screw

(Fig.2)

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5X25mm)

5. Screw

6. Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

Removing the unit

1. Frame

2. Release Frame Key Insert the release frame key into the groove at the right side of the frame, then prize out to remove the frame (You can also use the key to remove the frame from the left side.)

3. Release Unit Key After releasing the frame, insert the

release unit keys supplied with the accessory into the grooves at both sides of the unit as shown in figure until they click. Pulling the keys makes it possible to remove the unit from the dashboard.

2. DIN Rear-Mount(Method B)

Ta b

1. Factory-installed radio bracket

2. Car radio mounting bracket

3. Screw

4. After aligning the car radio mounting bracket with the factory-installed radio bracket, tighten the screws (M5X4mm) at 2 places on each side.

5. When fixing factory-installed radio bracket with the screws, use a standard-tipped screwdriver to pry the tabs of the car radio mounting bracket to make them fit into holes in the factory-installed radio bracket.

6. Movable panel frame.

Wiring Diagram

ANTENNA Socket

Yellow to Video output 1

Yellow to Video output 2

Red to Front Rch RCA output

White to Front Lch outputRCA

Green to SUB-Woofer output

Red to Rear Rch RCA output

White to Rear Lch RCA output

Violet Rear Right +

Violet/Black Rear Right -

Grey Front Right +

Grey/Black Front Right -

White Front Left +

White/Black Front Left -

Green Rear Left +

Green/Black Rear Left -

Blue toANT

Red toACC

BlacktoGNDB-

Yellow to Battery B+

TV Socket

Bluetooth Antenna

Operation

Location and Function of Keys

When you press button (3) and the front panel flip down:

2322

189

1915

To connect with mobile audio or video system by the cable (included in unit)

AV IN

When using the Remote Control * Before you using the remote control, please take the transparent insulator slice off the bottom of remote control. * Point the remote control at the remote sensor (9) within 2 meters. * It may not be possible to operate the remote control if the remote control sensor is exposed to direct sunlight. * Operation angle: about 30 in each the direction of the front of the remote sensor. * The remote control is a small, lightweight precision device. To avoid damage, short battery life, operational errors and poor response, observe the following.

- Do not subject the remote control to

excessive shock.

±°

- Do not put in a trouser pocket.

- Keep away from food, moisture and

dirt.

- Do not place in direct sunshine.

Battery replacement Battery type: a button cell lithium battery (CR2025 3V)

Remove the battery holder by pressing the locking tab with your thumb and pulling it out.

3. Closing the cover

Gently push in the holder until securely

locked into place.

2. Replacing the battery

Replace the battery with the same type and the (+) side facing up.

Remote control:

Preparing The Remote Control

27 39

A-B RPT

SUB-T

AUDIO

ZOOM

GOTO

PROG

RDM

TITLE

DISP

MODE

PBC

TRK/TUN

VOL

LO/DX

MO/ST

BAND

AS/PS

MUTE

ANGLE

BT MENU

DEL

SETUP

ENTER

Initial System Start-Up Be sure to press the button (1) when using the unit for the first time, after all connections are completed correctly.

1. Turn off the unit power.

2. Press with a ballpoint pen or similar pointed object.

Turning Power On And Off Turn on the unit by pressing any button (except button (3) and button (5)) or inserting a disc to disc slot (4). When system is on, press button (2) to turn off the unit.

Loading/Removing a Disc

1. Press button (3) to flip down the front panel.

2. Insert the disc into the disc slot (4) with the printed side facing up; the player will play the disc automatically.

Adjusting sound quality

Rota the button (6) or press

button (6) to adjust the volume level.

Adjusting Bass /Treble /Balance

/Fader/EQ/Loud/Subwoofer

1. Press button (6) repeatedly to choose the desired mode.

Press button (36) and then press

button (29) to choose the desired

mode. Each pressing the button changes the modes as follows:

RESET

VOL VOL

(+/-)

VOL

Remote control operation:

Whenever press button (5) to eject the disc.

Adjusting the volume level

VOL

BASS

TREB BAL

LOUD

SUBW

Volume level:00 ~ 63 Bass level: -07 ~ +07 Treble level: -07 ~ +07 Balance: 15L ~ 15R Fader: 15R ~ 15F EQ: Flat, Classic, Pop, Rock Loudness: ON/OFF

FAD

General Operation

Using The Detachable Front Panel

1.Press the Open button (3) to flip down the front panel.

2.Grasp the right side of the front panel, then gently push the front panel towards the left side before pulling it out from the unit.

3.Store the front panel in the protective case provided for safe keeping.

REMOVING AND PROTECTING DETACHABLE FRONT PANEL.

FRONT PANEL

PROTECTIVE CASE

front panel

open button

The front panel of the unit may be removed as a theft deterrent. After removing the front panel, use the case provided to keep the front panel from getting damaged.

TO ATTACH THE FRONT PANEL

Hold the right side of the front panel with the plate facing down. First attach the left side of the front panel to the unit by inserting the hole into the left holder. Then slightly push it leftwards and attach the right side hole into the right holder. Finally push up the front panel.

DISC/USB/SD AV IN

TUNER

Sub-woofer: ON/OFF

2. Rotate the button to choose the desired item.

Press button (29) to choose the desired item.

Display/Adjust Time

1. Displaying time: Press button (7) to show current information and time on the LCD, and it returns to original status after 5 seconds.

2. Adjusting time:

1). Press and hold button (7) until the clock blinking.

2).Press or buttontomoveto between hour area and minute area.

3). Rotate button (6) or to adjust hour or minute.

LCD Display (8) Exhibit current information and activated functions on the LCD display (8).

Remote Sensor Point the remote control handset to the remote sensor (9). Press the function keys on the handset to control the system.

Flashing Led (10) The led display will flash if the front cover is not inserted into the main unit.

ESP function If the unit has the electronic shockproof function, it can be shockproof about several seconds:

CD, VCD: 18 seconds. MP3: 160 seconds. DVD: 6 seconds.

MPEG4: 20 seconds. Loudness on/off Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. Press button (11) to switch loudness on/off. Equalization Press button (12) to turn on

VOL

Remote control operation

DISP

VOL

LOUD

equalization function and to select desired audio mode. There are f ur kinds of mode as below:

Mute Function Press button (2) to silence the sound instantly, press it again to resume previous volume level.

MUTE

Mode Function Press button (13) to switch to the desired mode. The mode will change every time the button is pressed.

MODE

Last Position Memory

- During disc playback, if you press button (2) to turn off the unit and then press the button again to turn on the unit, the DVD unit will resume playing from the point that it was interrupted.

- During disc playback, if you press button (13) to switch to other

mode, and then return to DVD/VCD mode again, the unit will resume playing from the point that it was interrupted.

Sub-Woofer Function This unit is equipped with a sub-woofer output jack. When a sub-woofer is connects to this unit. Press button (6) repeatedly to select SUBW and then rotate button to turn sub-woofer output on or off.

Reset Function

button on the housing must be activated with either a ballpoint pen or thin metal object. The button (1) is to be activated for the following reasons:

- Initial installation of the unit when all wiring is completed.

- All the function buttons do not

operate.

MODE

VOL

RESET

EQ FLAT EQ CLAS

EQ ROCK EQ POP

- Error symbol on the display. Note: If press button(1), the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the disc socket.

RESET

Selecting The Frequency Band Press button (14) shortly to select the desired band. The reception band will change between FM and AM.

Stereo/Mono Press (15) or on the remote control to select mono/stereo mode.

Local/Distant Press (15) for several seconds or to select between local and distant stations. LOCAL setting for reception of strong signal station, and DISTANT setting for reception of weaker signal stations.

Selecting Station

- Press for several seconds until

MANUAL appears on the display, and then press button to select a station. If both buttons have not been pressed for several seconds, they will return to automatic seek mode .

Automatic Memory Storing & Program Scanning

- Automatic memory storing Press button (17) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.

- Program scanning Press button (17) shortly to scan preset station. When the field strength level is more than the threshold level of

BAND

ST MO/ST

ST LOC

LO/DX

AS/PS

on the remote control

- Press preset button (16) to select a station which had been stored in the memory.

1-6

“”

Radio Operation

stop level, the radio is holding at that preset number for several seconds with release mute, and then searches again.

Station Storing

- Press button to activate automatic seek mode.

- In manual mode, press button to select a station Press preset button (16) for several seconds to store current station into the number button.

1-6

CD/MP3 Operation

Playback

Gently insert a disc with the label side facing up; the disc will be pulled into the unit automatically. The disc playback begins.

For CD:

. For MP3

1).

3).

Press button to move between

workareaA,Band C.

Press button to select the

desired folder or file of this work area.

2).

Press button (30) to confirm

the selected item.

ENTER

Selecting Tracks In Single Step

Press button (18) or button (19) to skip to the previous track or the next track. Track number shows on display.

Press and Hold button (18) or button (19) to fast reverse or fast forward. It return to normal mode when you release the button.

Pause Playback Press button (20) to pause CD/MP3 playing. Press it again to resume playback.

Stopping playback

Briefly press the button ( ) to stop the unit playback hen the button (21) is pressed and then press button , resume to the normal playback.

Press button (21) twice and then press button (20) to stop the playback and go back to beginning of the disc.

Fast-Forward / Fast-Reverse

1. Fast-Forward Press button (35) during playback. Each time the button is pressed, the speed of fast-forward changes according to the disc as follows

-21

(20)

FORWARD 2X 4X 8X 20X

In fast-forward state, press button (20) to recover normal playback.

2. Fast-Reverse Press button (34) during playback. Each time the button is pressed, the speed of fast-reverse changes according to the disc as follows:

BACKWARD 2X 4X 8X 20X

In fast-reverse state, press button (20) to recover normal playback.

Repeat Play/ Paragraph Repeat Play

When you want to repeat play whole disc, a track or a directory in the disc.

Press button (22) repeatedly to

select different repeat modes.

For different kinds of discs, pressing

button 22 has different effects.

For CD:

- Repeat play:

1) RPT

2) RPT

()

For MP3:

NOTES:

Only the current track (file) is

repeatedly playing.

Only tracks (files) in the

current folder are repeatedly .

Current disc is repeatedly

The mode returns to normal

playback.

Paragraph Repeat Play: When you want to repeat play a desired paragraph. A-B repeat allows a passage to be repeated continuously. Press button (27) first at the start of the required passage.

Press button secondly at the end of the passage.

Then the unit will repeat playing the passage you just set from A to B. To revert to normal playback, press button again.

REP 1:

REP DIR:

REP ALL:

REP OFF:

A-B

playing

(27)

REPEAT A-

REPEAT CANCEL

REPEAT A-B

Playing In Random Sequence Press button to the random mode on off If the random mode is on tracks (files) on the disc will be play in random sequence.

Previewing All Tracks Press button (24) to play first several seconds of each track on the current disc. Press the button again to stop intro and return .

RDM

INT

toggle

/. ,

to normal mode

REP 1 REP ALL REP OFF

REP 1 REP DIR REP ALL REP OFF

DVD/VCD Operation

Playback with PBC Menu

Press button to toggle between PBC ON and PBC OFF. In PBC ON mode, REPEAT, RANDOM, AB, PROGRAM and GOTO functions are void.

Playback With Menu If the DVD disc or VCD SVCD discs has a menu system, and the PBC

, you can display the menu which allow you to select the program to playback by pressing

button (37).

1. the cursor buttons ( ) to highlight the item you wish to select.

2. Press button (30) to select this item. Some discs offer a series of menus which with a wide variety of choices. You can continue to navigate the menu further using a combination of the cursor buttons ( ) and the button (30).

Pausing playback

1. During playback, Press button (20), the image or sound pauses temporarily.

2. Press the button (20) again to resume playback.

Stopping Playback

Briefly press the button (21) to stop the unit playback When the button is pressed and then press button 20 , resume to the normal playback.

Press button ( ) twice and then press button to stop playback and go back to the initial track/chapter.

Fast-Forward / Fast-Reverse

1. Fast-Forward Press the

For some VCD or SVCD discs there is menu in order to select the deired contents This menu is called PBC

Playback Control menu

().

(

)

Move

PBC

TITLE/PBC

ENTER

(37)

Playback

Control setting is on

button (35) during playback. Each time the button is pressed, the speed of fast-forward changes according to the disc as follows

FORWARD 2X 4X 8X 20X

In fast-forward state, press button (20) to recover normal playback.

2. Fast-Reverse Press button (34) during playback. Each time the button is pressed, the speed of fast-reverse changes according to the disc as follows:

BACKWARD 2X 4X 8X 20X

In fast-reverse state, press button (20) to recover normal playback.

Repeat Play/ Paragraph Repeat Play

When you want to repeat play whole disc, a track or a chapter in the disc.

Press button (22) repeatedly to

select different repeat modes.

- Repeat play:

For different kinds of discs, pressing

button (22) has different effects.

For DVD:

1) RPT

2) RPT

For VCD/SVCD:

NOTES:

Only current track (file) is

repeatedly play.

The current chapter is

repeatedly play.

A disc is repeatedly play.

The mode returns to normal

playback.

Repeat feature does not support VCD

2 0 PBC is on

When you want to repeat play a desired paragraph. A-B repeat allows a passage to be repeated continuously. Press button (27) first at the start of the required passage.

Press button secondly at the end of the passage.

Then the unit will repeat playing the passage you just set from A to B.

REP 1:

REP CHAPTER:

REP ALL: REP OFF:

Paragraph Repeat Play:

A-B

.( ).

REP TITLE: The title is repeatedly play.

REP CHAPTER REP TITLE

REP OFF

REPEAT A-

REPEAT A-B

REP 1 REP ALL REP OFF

To revert to normal playback, press button again.

A-B

REPEAT CANCEL

Finding The Beginning of Chapters or tracks (Files) Use this function to easily move to the beginning of the chapters or tracks (files) on the disc. During playback, ress button ( ) or button ( )

the chapter /track

: Press the button to start playback from the beginning of the next chapter or track (file).

: Press the button to start playback from the beginning of the previous chapter or track (file).

1. Some DVDs do not have chapters.

2. For some VCD2.0 discs (PBC control),

buttons may be void.

Searching Directly by Chapter or Track Number Use this function to easily move to the beginning of the chapters or tracks (files) on the disc. * This operation is performed by the remote control unit.

1. During playback, pre-stop or pause, input the chapter or track number you want using the numeric keypad ( to

2. Waiting for a little. Playback starts from the selected chapter or track. * This function cannot be used on discs which no chapter numbers are recorded.

Playing In Random Sequence

On Screen Display Function Press the button for several seconds during playback to display the

each time

Press button to switch the random mode on off If the random mode is on tracks (files) on the disc will be play in random sequence.

18 19 to skip and

play .

/. ,

Note:

(38)

“”

RDM

SUB-T

console information of the current disc on the screen. FOR DVD: Press button (38) for several seconds continually you will see the information as the following order.

1)TT Display the current title number and total title number.

2)CH Display the current chapter number and total chapter number.

3) Display the played times of the whole disc.

4)C-: Display the remaining times of the current chapter.

5)T: Display the played times of the current title.

6)T-: Display the remaining times of the current title.

7)C: Display the played times of the current chapter.

Display the current disc language, audio type, subtitle language and play angle. For VCD: The meaning of the menu is the same with the DVD menu above.

SUB-T

GOTO Function Press button, the screen will display the following message: FOR DVD:

Use the number keys (32) to input the desired Title, Chapter or Time, and then press button (30) to confirm. FOR VCD:

Use the number keys (32) to input the Track and Time then press button (30) to confirm.

ZOOM Function Press button (28) to enlarge or reduce the size of image according to the disc as follows.

In zoom in state, press buttons (29) to move pictures up down, left right direction in order to find the picture that you want to zoom in.

Multi-subtitle Language Function

Press button (38) during playback. The following information will be shown on the screen.

Notes:

Not all discs will allow changing the subtitle during playback. In these cases, select subtitle from the DVD's menu.

There may be a delay before the selected subtitle appears.

GOTO

ENTER

ZOOM

SUB-T

Some DVD has multiple subtitle language, the subtitle language can be switched during playback, or subtitles can be hidden.

Each time press the button, the subtitle switches between multiple languages recorded on the disc.

For some discs, the subtitles will be displayed even when this is set to off.

The language number is different

PBC

ZOOM 2

ZOOM 3

ZOOM 4

ZOOM 1 2/

ZOOM 1 3/ ZOOM 1 4/

ZOOM OFF

according to the disc.

Some discs only contain one subtitle

language.

Each time press button (39) during playback, the sound switches between the audio tracks recorded on the disc.

- Some discs only contain one

soundtrack language.

For DVD discs what with multiple audio tracks, you can switch the audio track temporarily during playback. Each time press button (39) during playback, the sound switches between the audio tracks recorded on the disc.

Switching the Audio Tracks For some discs what with multiple audio tracks, you can switch the audio track temporarily during playback.

Notes:

Multi-audio Language Function

Each time the button is pressed, the audio soundtrack language changes on sequential order. Notes:

- The language number is different

according to the disc.

- Some discs only contain one

soundtrack language.

- Not all discs will allow changing the subtitle during playback. In these cases, select subtitle from the DVD's menu.

Multi-angle Function For some DVD discs in which scenes have been filmed from multiple angles, the angle can be switched during playback. Press button (40) during playback. The following information will be shown on the screen.

VCD/SVCD

AUDIO

ANGLE

ANGLE 1

The angle switches between the angles recorded on the disc each time the button is pressed. Notes:

Some time may be required for the

angle to change.

Depending on the disc, the angle may

switch in one of two ways.

1 Seamless: The angle switches

smoothly.

2 Non-seamless: When the angle is

switched, a still picture is displayed first, after which the angle switches.

The angle number is different

according to the disc.

The function only works for discs having scenes recorded at different angles.

- In VCD/CD playback mode, press

button 33) can activate program

edit interface as follow:

Use cursor button to select the item that you want to program.

1). The item you selected will become highlight.

2). Input the track number that you want to program by numeric buttons (0-9) on the remote control.

3). Press cursor buttons to move to "PLAY" operation button and then press button (30) to program playback.

- In DVD/MP3 playback mode, press

button (33) to activate program

Program Play Function

PROG

ENTER

PROG

edit interface as follow:

Use cursor button to select the item that you want to program.

1). The item you selected will become highlight.

2). Input the track number that you want to program by numeric buttons (0-9) on the remote control.

3). Press cursor buttons to move to "PLAY" operation button and then press button (30) to program playback.

Frequently Asked Questions

When inserting a DVD disc, why it can't

be played, just showing region error ?

It is because that the DVD player and the discs all have the REGION CODE . If the region number described on the DVD disc does not correspond to the region number of this DVD player, the unit cannot play the disc.

When inserting a DVD disc, there is a window shown on the screen that requires entering 4 characters password, why?

It is because that the current disc has

Parental Control level, and the player's parental level is set below the level of the disc, you should enter the correct password to play the disc normally. NOTE: For how to set the Parental Control level, please refer to Parental Control on page 17.

ENTER

“”

When you insert a data disc including audio (MP3), movie (MPEG), picture (JPG) files into the disc slot, the following media play window will be shown on the screen:

Explain as follows:

1. Press button to move between workareaA,workareaBandworkarea C.

2. Press button to select the desired folder or file of this work area.

3. Press button (30) to confirm the selected item.

4. In viewing picture or playback movie mode, if you want to return to the previous menu, press button.

This disc player offers you an USB port (26). A USB device can be connected through this slot.

Using the USB driver: When you insert an USB device into the USB port (26), the DVD player will read the USB automatically. The unit gives priority to the latter. If insert a disc into the disc slot (4) while read the USB device, the unit will play the

Work area A: Work area B: Work area C: (1): (2): (3): Work area D:

folders list

files list

playback audio mode (default) viewing picture mode playback movie mode

file information display

ENTER

(STOP)

Data Disc Play Operation

Operation of USB device

disc. Press (21) button to enter into PRE-STOP mode, then press button to switch to the reading USB mode.

Note: When reading the USB device, please don't touch or take out the device. If following the instruction above, the unit can't still read the device, please check if the device is in good condition, or take out the device then insert it into the USB port (26) once more.

The main unit can only support the standard USB-memory disc which is approved by Microsoft.

USB MP3 player is not a standard which means different brand name or different models have their own standard. So our product may not support every MP3 player.

When connecting an MP3 player and there has normal battery in the player (non rechargeable battery), you should remove the battery from the MP3 player then connect it to the USB port. Otherwise, it may cause battery burst.

When in USB play mode, be sure not to

remove the USB device from the USB port.

GOTO

This disc player offers you a memory card slot (41).

Using the SD/MMC card: When you insert a SD/MMC card into the memory card slot (41), the DVD player will read the card automatically. The unit gives first priority to the latter. If insert a disc into the disc slot (4) while read the SD/MMC card, the unit will play the disc. Press (21) button to enter into PRE-STOP mode, then press button to switch to the reading card mode.

Note: When reading the memory card, please don't touch or take out the card. If following the instruction above, the unit can't still read the card, please check if

SD/MMC

GOTO

Operation of Memory Card

1. About Parental Control

DVD discs have a parental level assigned to the disc. The range of parental controls is from1to8. The player can be set in a similar way. If the player's parental level is set to 8 it will play all discs. If the player's parental level is set below 8, only discs with a lower or equal parental level can be played. For example if the player is set to 5, only discs with parental control ratings of 5, 4, 3, 2,&1canbeplayed. To play a higher rated disc you must change the player's rating to a higher number. For example, consider a disc that generally is suitable for most audiences, and is rated as level 2 for the most part. However in the middle there are also scenes rated at5&7

The player plays the highest rated scene that the parental setting allows. A section of the disc can have several different sequences that vary in parental control level. In the above example of a disc with parental control, the player will show a different section depending on the parental control level set in the player's menu. In this way parents can control the content of films and there is no indication that any censorship has occurred. The meaning of the levels 1 to 8 varies depending upon the country and the type of content on the disc. The parental control levers are:

that are not fitting for children, it will be cleared or replaced by the other fitting scene automatically.

Attachment

This disc player offers you the option of using the auxiliary A/V input to connect a video game, digital camera camcorder or other units you wish to use in your automobile audio video system. 1

2 Press the button (13) to toggle the mode on or off.

jack

).To connect with a automobile

audio/video system by AV IN cable.

)MODE

AV IN

AV In Operation

1 2 3 4

5 6 7 8

Unlock Unlock KID SAFE G PG PG 13

PG-R R NC-17 ADULT

the card is in good condition, or take out the card then insert it into the card slot once more.

Press button (13) to switch to TV mode. In TV mode, the function of the buttons served in DVD mode is locked.

Searching Channels Pressing button will enter into automatically searching state. Then press button (19) to start searching TV channels and press button (18) to stop searching.

Selecting Channels

- Press button (19) to choose channel upward, press button (18) to choose channel downward.

- Type two digits to select desired channel by the corresponding numeric button (32).

VolumeAdjustment Press button (6) adjust volume level.

Mute

MODE

GOTO

VOL+/VOL-

MUTEPress button (2) to mute the

sound, press this button again to resume previous volume level.

TV Operation

In DVD mode, when the disc is playing or in stop mode, press button (31) to enter setup menu.

1. When the cursor is on the topside, use buttons to move between the

different pages.

2. Press button to move the cursor to

the setup page below and then you can use buttons to move between the different setup options.

3. Press or ENTER button to move to

the choice list of each setup option and then use buttons and button to change your selection.

4. When the setting is complete, press

button (31) to return to normal mode. * When settings are changed, old settings are overwritten. Make a note of the current settings before making changes. If the vehicles battery is disconnected, the settings will be cleared and will return to the factory settings.

When you open the setup menu, you will see the system setup page at first, see below:

TV SYSTEM TV SYSTEM is used to select the TV output mode. This player can play discs recorded in either PAL or NTSC formats. Select NTSC format, when the unit is connected to NTSC TV. Select PAL format, when the unit is connected to PAL TV.

SETUP

ENTER

SETUP

Setup

System Setup

2. About MP3

What is MP3? MP3, whose official name is MPEG-1 Audio Layer 3, is a compression standard prescribed by the ISO, the International standardization organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. Method for creating MP3 files Audio data is compressed by using MP3 specified software. For details on creating MP3 files, refer to the user's manual for that software. MP3 files that can be played back by this device have the file extension MP3 . Files with no extension cannot be played back. Supported playback sampling rates and bit rates MP3: Sampling rates: 32 KHz - 48 KHz Bit rates: 32 + 320 kbps Producing MP3 discs MP3 files are prepared, and then written to a CD-R or CD-RW (DVD-R/DVD-RW) using CD-R writing software. A disc can hold up to 1024 files /256 folders (including root folders). Corresponding file systems This device supports discs formatted with iso9660 level 1 or level 2. Under the iso9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file names are letters A-Z (all caps), numbers 0-9, and '_' (underscore). This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to iso9660. However, sometimes the file names, folder names, etc., are not displayed correctly.

“

”

“”

SYSTEM SETUP

TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

16:9 Select this when connected to a wide screen TV.

Password Change the password locking or unlocking I

he default

is 0000 .

SETTING the Rating Level (Parental Control) Use this function to restrict the viewing of movies to children of appropriate age levels only.

1) Press or button to select

then press button.

2) Use the numeric keypad 0 to 9 to input the 4-digit password, and then press

button. The default password is

0000 upon shipment from the factory.

3) Press or button to select

then press button. The restriction level parental level input display appears

4) Press button to select the restriction level (1 to 8), and then press

button.

5) When the setting is complete, press

button to return to normal mode.

DEFAULT Restore the system setup to the default setup.

When you open the language setup menu, you will see the language setup page:

nputting numbers are

dispalyed as XXXX T""

password

The password input mode is activate.

“”

“” “”

“”

PASSWORD ENTER

ENTER

RATING ENTER

ENTER

SETUP

Language Setup

Select AUTO format, the player TV output Change the TV mode among NTSC, PAL and AUTO. The default setting is NTSC format.

SCREEN SAVER Change the SCREEN SAVER on or off.

SETTING the TV TYPE Use the procedure described below to set the output screen according to the type of TV monitor being used. Setting contents: 4:3PS /4:3LB /16:9. For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc's jacket.) 4:3PS(PANSCAN) Select this when connected to a conventional 4:3size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie).

This is selected upon shipment from the factory. 4:3 (LETTER BOX) Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black bands visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatre release of the movie.

menu, you will see the DIGITAL SETUP page:

1). OP MODE: Change among LINE OUT/RF REMOD.

- LINE OUT: LINE OUT mode, with

digital dialog normalization.

- RF REMOD: RF REMODULATION mode, with heavy compression and digital dialog normalization.

2). DYNAMIC RANGE: Change among FULL, 6/8, 4/8, 2/8, OFF.

3). DUAL MONO: Change among STEREO,MONOL,MONOR,MIX MONO.

Digital Setup

You can change the OSD/ AUDIO/ SUBTITLE/ MENU language:

OSD LANGUAGE:

AUDIO LANG:

SUBTITLE LANG:

MENU LANG:

When you open the AUDIO menu, you will see the following picture:

1) AUDIO OUT: Change among SPDIF/OFF, SPDIF/RAW and SPDIF/PCM.

2) KEY: Change among b,-4, -2, 0, +2, +4, #.

When you open the DIGITAL SETUP

ENGLISH/GERMAN/SPANISH/FRENCH/PORTU GUESE/ITALIAN/RUSSIAN/POLISH

ENGLISH/GERMAN/SPANISH/FRENCH/PORTU GUESE/ITALIAN/ /POLISH

RUSSIAN

Audio Setup

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG DIVX [R] VOD

EXIT SETUP

LANGUAGE SETUP

AUDIO OUT KEY

EXIT SETUP

AUDIO SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

DIGITAL SETUP

6. BT MENU

BT MENU

PRES 06: RECV 06: DIAL 06: MISS 06: AUTO ON/OFF:

ZOOM

At connect status, press the button (31) on the remote control to enter bluetooth menu. The structure of the blue tooth menu as follows:

Preset number list.

Received call list.

Dialed call list. Missd call list. Switch auto answer or manual answer.

’t

“ + ”) . Simultaneity, the inputted number will be appeared on the LCD. If a number is wrongly input, press the DEL button (21) to delete the incorrect number. After the entire phone number has been input, press the to save the phone number. Press again to exit from phone editing status.

“”

Use cursor button to select the item. Press the to enter the current menu item. Press the button (28) to exit from current menu. Press the

button exit bluetooth menu.

You can select the next or prev phone number that stored on preset number list by pressing the button.

Press to enter preset number list. You can see (1-6) on the LCD if you haven stored any phone number. Then press again to enter editing status. Press 0~9, # or*to edit phone number, (pressing and holding the + (14) button, when you want to input

When you look around the preset number or received list or dialed list or missed list, you can dial any phone number on the lists by pressing button.

Select auto answer or manual answer the coming phone by pressing after enter this preset item.

ENTER

ZOOM

a) Select preset number list:

b) Edit preset number list:

ENTER

NONUMBER

ENTER

) Dial phone number of menu list:

d) Switch auto or manual answer

Bluetooth function Tipwizard

1. PAIR

2. CONNECT

4. Accept / Reject / End call

During pairing, please input pairing PIN code 888

The bluetooth module can auto connect with your mobile phone so long as you activate the bluetooth of the mobile phone. If connecting success, CON OK will be visible on the LCD of this unit, otherwise, it will appear NO CONT

4.1 Accept call When a ring comes, press the

“8 ” and confirm in your mobile

phone.

“”

“”on the LCD. Meanwhile, the “BT” and “ ” twinkle continuously on the LCD display.

3.1 Dial with the mobile phone directly.

3.2 Dial with the remote controller.

3.2.1 At connect status, press the “ ” button (42) to activate bluetooth mode, the “CONNTED” will be shown on the

LCD display.

3.2.2Press“0~9”buttonontheremote control to input telephone number. Simultaneity, the input number will be appeared on the LCD. If a number is wrongly input, press the DEL button (21) to delete the incorrect number.

3.2.3pressthe“ ”buttontoexecute dialing.

“ ” button

to switch on the calling.

4.2 Reject call When a ring comes, press the “ ” button (40) to reject the coming call.

4.3 End call When you are talking, press the “ ”

button to hang up the current call.

During talking status, you can transfer talking to private listening on your phone from your car audio by pressing the “ ” button; press the “ ” button again to get back to car audio.

3. DIAL CALL

5. Call Transfer

7. Voice dialing function

8. A2DP Function

A2DP

MODE

Remark:

If your mobile phone support voice dialing function, you can dial a phone number by voice dialing.

Remark: Please operate the voice dial function according to your mobile phone manual.

If your mobile phone support function ( Advance Audio Distribution Profile) that it is special designed for transmitting stereo music to bluetooth device. You can listen to the music stored in your mobile phone by this car audio.

The , and button are available in A2DP playback status. Press the button to switch to other mode.

Please be sure that the distance between Your mobile phone and car audio is less 3 meters.

If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Do not try to repair the player by yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. No Power

If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to

ACC .

Check if the fuse is blown. Then replace the new fuse. Check if the on/off button on the front of the player is set to on.

No Picture

Check if the monitor or TV is switched on.

Check if select proper mode, such as Disc Play mode and AV mode. Check the video connection.

Distorted Picture

Check the disc for fingerprints and clean with soft cloth, wiping from centre to edge.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Completely Distorted Picture

The disc format is not matching up to the TV-set used (PAL/NTSC). No Color in Picture

The disc format is not matching up to the TV-set used (PAL/NTSC). Disc Does Not Play

Ensure the disc label is upwards.

Clean the disc. Check if the disc is defective by trying another disc.

No Sound

Check audio connections.

If using a HIFI amplifier, try another sound source.

Distorted Sound from HIFI Amplifier

Check to make sure that no audio connections are made to the amplifier phono input. The Player Does Not Respond To the Remote Control

“” ?

? ? ?

? ?

Aim the remote control directly at

the sensor on the front of the player.

Avoid all obstacles which may interfere with the signal path. Inspect or replace the remote control battery.

Distorted or B/W Picture

The disc format is not according to the TV-set used (PAL/NTSC). No Audio at Digital Output

Check the digital connections

Check the Digital Audio menu to make sure that the digital output is correctly set. Check if the audio format of the selected audio language matches your receiver's capabilities.

Buttons Do Not Work

Press Reset button on the housing of the DVD unit. The Radio Does Not Work

Check if the antenna cable is connected firmly. The Radio Station Automatic Selection Does Not Work

If the signals are too weak, select a station manually.

Trouble Shooting

1. GENERAL Power Supply Requirements

DC 12 Volts, Negative Ground

Chassis Dimensions

178(W)x160(D)x 50(H)

Tone Controls

- Bass (at 100 Hz) 10 dB

- Treble (at 10 KHz) 10 dB

Maximum Output Power

4x60 watts

Current Drain

15 Ampere (max.)

2. DVD PLAYER Signal to Noise Ratio

>55dB

Channel Separation

>40dB

Frequency Response

20Hz-20KHz

3. RADIO

FM Frequency Coverage

FM:87.5-107.9MHz

10.7 MHz

Sensitivity (S/N=30dB)

Stereo Separation

>25dB

AM Frequency Coverage

530 - 1710 KHz

450 KHz

Specification

Pyle View PLD175TBT Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual