Page 1
Model PTC42： LC
16:9 DIGITAL LCD-TV-Monitor
42 Hi-Definition LCD Flat Panel TV
OPERATING MANUAL
Page 2
Contents
Contents
1
PREFACE
SAFETY
2
PRECAUTIONS
FRONT AND BACK
CONNECTIONS
3
OF LCD TV
3
3
5
TV INSTALLATION
4
DRAWINGS
REMOTE CONTROL
5
MENU OPERA TION
7
Antenna Connection
HDMI Connection
PC Connection
S VIDEO Connection-
YPbPr Connection
AV Connection
Remote control instructions in TV mode
Remote control setup
Basic operation
Select on screen language
Volume adjustment
How to adjust the OSD screen
Choosing a TV channel
Selecting input source
Picture menu options
Audio menu options
Setup menu options
Feature menu options
VGA menu options
Component menu options
6
6
6
7
7
8
9
11
12
11
12
13
13
14
14
15
15
17
19
20
1
Page 3
Contents
7
8
TROUBLESHOOTING
AND ADVICE
SPECIFICATIONS
21
22
2
Page 4
Preface
1. PREFACE
Thank you for buying this TV ! Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV is damaged, do not install
it and contact
Your dealer. Check that you have all the accessories according to the model.
2. SAFETY PRECAUTIONS
Put the TV on a stable surface.
Minimum distances
10cm
20cm
10cm 5cm
Do not place any material on the TV.
Do not use the with fixtures other than those provided or
TV
suggested by the manufacturer.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount, check that it is steady.
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
3
Page 5
Safetyprecautions
Keep the TV dry and away from humidity.
Keep the TV away from heat sources
.
Unplug the before cleaning it. Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by
the manufacturer. Using inadequate spare parts can
shocks, short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4
Page 6
Tv in stalltion drawings
3. Front , Back , Connections of LCD
Front View
MENU
SOURCE
IR
ON OFF/ LED
VOL+VOL-CH+CH-
POWER
Back View and Control Connections
HDMI1
1819
Pb1
PC IN
PC AUDIO
HDMI2
1
3
2
4
Y1
Pb2
Y2
5
6
17
1516
14
8 9
L
R1L1
R
R2L2
10
Pr1
Pr2
7
13
V
SVIDEO-
11 12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
RF
17
18
19
HDMI1
HDMI2
PC AUDIO
PC IN
Y2
Pb2
Pr2
L2(YPbPr2)
R2(YPbPr2)
R(V/S-VIDEO)
S-VIDEO
RF
V
L(V/S-VIDEO)
R1 1(YPbPr )
L1(YPbPr1)
Pr1
Pb1
Y1
5
Page 7
Tv in stalltion drawings
4. TV INSTALLTION DRAWINGS
VHF ANTENNA
UHF ANTENNA
HDMI1 HDMI2
HDMI1 HDMI2
6
Page 8
Menu Operation
AUD IO
RGB -PC OUT PUT
L
Y
HDMI1
HDMI2
PC AUDIO
Stereo Audio Cable
PC IN
Pb1
Y1
Pb2
Y2
PC IN
RGB-PC OUTPUT
Pr1
Pr2
L
R1L1
R
R2L2
V
RF
SVIDEO-
HDMI1
HDMI2
PC AUDIO
PC IN
Pb1
Y1
Y2
Pb2
Pr1
Pr2
L
R1L1
R
R2L2
V
RF
SVIDEO-
7
Page 9
Menu Operation
YPbPr Connection
HDMI2
PC AUDIO
PC IN
Pb1
Y1
Y2
Pb2
Pr1
Pr2
L
R1L1
R
R2L2
V
RF
SVIDEO-
HDMI1
HDMI2
PC AUDIO
PC IN
Pb1
Y1
Y2
Pb2
Pr1
Pr2
L
R1L1
R
R2L2
V
RF
SVIDEO-
8
Page 10
Remote control
POWER
MUTE
NUMBE R BUTTONS
CH+/-
VOL+/ -
DISPL AY
PMODE
SMODE
5. REMOTE CONTROL
Remote control instructions in TV mode
Switch on LCD TV when at standby mode or vice
versa.
Press to mute the sound. Press again or press
VOL+ to unmute.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you
are watching TV. The channel change after 2 seconds.
-/--
Press this button to enter a program number for
multiple program channel such as 2-1,etc.
Return to the previous channel viewed.
Press to scan through channels. To scan quickly
channels, press and hold down either +/-button.
Press to increase / decrease the sound level.
Press repeatedly to cycle through the available video
picture modes.
Press to cycle through the different sound settings.
Press to display the source and channel’s information.
9
Page 11
Remote control
THUMB STIC K( /// /OK ENTE R )
EXIT
MENU
SLEEP
CCD
MTS
SOURC E
SIZE
FAV
FAV+
FAV-
EPG
THUMBSTICK(/// /OKENTER)
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Clears all on-screen displays and returns to TV
viewing from any menu.
Brings up the main menu to the screen.
Press to cycle through the input source in following:
TV
Composite
S-Video
Component1 Component2
HDMI1HDMI2
Closed caption button.
VGA
Audio selection button.
Lets you select amount of time before your TV turn
itself off automatically..
Enlarges the main picture size.
Press to enter the EPG menu directly.
Press to enter the favorite menu.
Press to increase the program which you favorite.
Press to descrease the program which you favorite.
10
Page 12
Battery Usage Caution
Remote control setup
1.Open the cover
2.AAsize batteries, When inserting the batteries, make sure correct polarities as per”+“and ”-“marks
on the batteries and within the battery compartment
3.Replace the battery cover
To prevent battery leakage which may result in bodily injury or damage to the remote:
1.Install all batteries correctly, and as marked on the remote control.
2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc)
Remove batteries when the remote is not used for a long time.
11
Page 13
Menu Operation
6. Menu Operation
Basic operation
Select on screen language
NOTE: If you use your LCD TV for the first time, you should select the language which will be used for displaying
menus and indications.
Picture
Audio
Setup
Feature
Tuning Band
Auto Channel Search
Add On Channel Search
Manual Channel Set
Channel Labels
Menu Language
Reset
To Move To Select To Exit
Enter
Air
English
Exit
Volume adjustment
1. Press to adjust the volume.VOL+/-
2. If you want to switch the sound OFF , press the MUTE .
3. You can cancel this function by pressing or .MUTE VOL+
Press to display the main menu.
MENU
Press / repeatedly to select the .
Use / and / to select .
Press ENTER button to select your desired language.
When you are satisfied with your choice, press
to exit.
Setup
Menu Language
MENU
12
Page 14
Menu Operation
How to adjust the OSD screen
- Press the button to display the main menu.MENU
- Use / / / buttons to select and adjust the available menus.
Picture
Audio
Setup
Feature
Picture
Audio
Setup
Feature
Picture Mode
Contrast 50
Brightness
Sharpness
Color
Tint
50
50
50
50
Aspect Ratio
Enter
ToMove To Select To Exit
Time Set
Sleep Timer
Advanced Video Menu
Parental Control
Closed Caption
Enter
ToMove To Select To Exit
Normal
Exit
Exit
User
Off
Picture
Audio
Setup
Feature
Picture
Audio
Setup
Feature
Audio Language
Audio Mode
Bass 30
Treble 30
Balance 0
Enter
ToMove To Select To Exit
Tuning Band
Auto Channel Search
Add On Channel Search
Manual Channel Set
Channel Labels
Menu Language
Reset
Enter
To M ov e To S el ec t To E xi t
Default
User
Exit
Air
English
Exit
The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides
graphical presentation.
1. Using the CH+/CH- on the panel or on the remote control.
Press to increase channel number.
CH+
Press to decrease channel number.
CH -
2. Using 0-9 digital buttons and -/--button.
You can select the channel number by pressing 0 to 9 or -/--.
Choosing a TV channel
13
Page 15
Menu Operation
Selecting input source
You can select the input source by pressing the on the remote control or on the panel.SOURCE
Source List
Composite
S-Video
Component1
Component2
To M ov e To Select To Exit
Enter
Picture menu options
TV
VGA
HDMI-1
HDMI-2
Exit
In this manual, the OSD ( On Screen Display) may be different from your TV’ s because it is just example to help the
TV operation.
Press the MENU on the panel or on the remote control and then use / to select the Picture menu.
Picture
Audio
Setup
Feature
Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE
menu. You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast
Press / button and then use / to adjust the contrast of the picture.
Brightness
Press / button and then use / to adjust the brightness of the picture.
Sharpness
Press / button and then use / to adjust the sharpness level of picture.
Color
Press / button and then use / to adjust the color saturation.
Picture Mode
Contrast 50
Brightness
Sharpness
Color
Tint
Aspect Ratio
To Move To Select To Exit
50
50
50
50
Enter
Exit
User
Wide
1. Use / to select what you want to adjust in the
menu.Picture
2. Press / button to adjust.
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
14
Page 16
Menu Operation
Tint
Press / button and then use / to adjust the tint of picture.
Aspect Ratio
Enter
Press to select the ratio of picture display such as Normal/ Zoom/ Wide/Cinema/Waterglass.
AUDIO menu options
Press MENU on the panel or on the remote control and then use / to select the AUDIO menu.
Picture
Audio Language
Audio Mode
Default
User
Bass 30
Audio
Setup
Feature
Treble 30
Balance 0
To Move To Select To Exit
Enter
Exit
1. Use / to select what you want to adjust in the
menu.Audio
2. Press button to adjust.
/
3. When you are satisfied with your adjustment, press
or to exit the main menu.MENU EXIT
Audio Language
Enter
Press to select one of the audio language such as English/ French and Spain, but the condition is that the program
system has included the language code.
Audio Mode
You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND
menu. You may select the sound mode directly by pressing the SMODE button on the remote control.
Bass
Press / button and then use / to increase or decrease the level of the lower-pitched sounds.
Treble
Press / button and then use / to increase or decrease the level of the higher-pitched sounds.
Balance
Press / button and then use / to adjust the audio output between left and right speakers.
Setup menu options
Press MENU on the front panel or on the remote control and then use / to select the Setup menu.
Picture
Audio
Setup
Feature
Tuning Band
Auto Channel Search
Add On Channel Search
Manual Channel Set
Channel Labels
Menu Language
Reset
To M ov e To S el ec t To E xi t
Enter
English
Exit
Air
1. Use / to select what you want to adjust in the
menu.Setup
2. Press button to adjust.
/
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
15
Page 17
Menu Operation
Tuning Band
Press key to selectAir/Cable.Enter
Auto Channel Search
Press ▲ / ▼ key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press key to
Enter
enter your selection and scan. After the scan is finished, the following menu will display. The channels found are
automatically saved as below:
Auto Channel Search-Air
Analog Channels
Analog Found
Digital Found
Progress(%) 12
Exit
To
Scanning
2
0
Exit
Add On Channel Search
When the channels are found, use / to add it to the channel list.
Manual Channel Set
Press Enter button to display a channel list that you can select channel as below:
Manual Channel Set Menu
Ch 42 -1 ATSCdmo Viewable
Ch 2 -0 Viewable
Ch 11 -0 Viewable
Ch 22 -0 Viewable
Ch 31 -0 Viewable
Ch 52 -0 Viewable
Ch 54 -0 Viewable
Ch 66 -0 Viewable
Ch 68 -0 Viewable
To M ov e
To Change To Select
Exit
Channel labels
Allows you to name the channel that is selected. Use ◄ / ► to move the cursor and use ▲/▼ to input the name and then
press Menu or Enter to return or exit as following:
Channel Labels Menu
Ch 42-1 ATSC dmo
To Move To Change To Exit
Exit
Menu Language
To select language of the OSD.
16
Page 18
Menu Operation
Ente r
Feature menu options
Press MENU on the front panel or on the remote control and then use / to select the Feature menu.
Picture
Time Set
Sleep Timer
Off
Advanced Video Menu
Audio
Setup
Feature
Parental Control
Closed Caption
To Move To Select To Exit
Enter
Exit
1. Use / to select what you want to adjust in the
menu.Feature
2. Press button to adjust.
/
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
Time Se t
Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.
Time Set Menu
Time Set Mode
Time Zone
Year
Date
Time
To M ov e To Select To Exit
Enter
Auto
Pacific
2006
Dec 29
12:00 AM
Exit
Time Set Mode
You can select one of auto and manual to set the time. When selected auto, the item of year/date and time will be disabled
and can not to adjust. When select the manual mode, you can press ◄/► and ▲/▼ to set the corresponding functions.
Time Zone
Press ◄/► to select the time zone such as Pacific/ Alaska/ Hawaii/ Eastern/ Central/Mountain.
Sleep Timer
Press to select the amount of time before your TV turn off automatically and press the Enter that can select the 15 min
/30 min/ .../240min and OFF.
Advance Video Menu
Press Enter to enter the advance video menu as below:
Advance Video Menu
Noise Reduction
Color Temperature
3D Y/C
Adaptive Contrast
Gradient Enable
Blue creenS
Audio Only
Input Source Labels
To Move To Select To Exit
Enter
Off
Normal
Off
On
On
On
Exit
17
Page 19
Menu Operation
*
- Noise Reduction--Spatial: press Enter to select one Off/Low/Medium/High.
- Color Temperature: press Enter to select one of Normal/Cool and Warm.
- 3D Y/C: press Enter to select on or off.
- Adaptive Contrast: press Enter to select on or off.
- Gradient Enable: press Enter to select on or off.
-Blue Screen: press Enter to select on or off.
-Audio Only: press and select OK nter ."" , 3to e the Audio Only mode Hold down the Power sec to exit Audio Only mode
-Input Source Lables: press nter Input Source Lablesto e the menu.
Parental Control Menu
Press Enter to enter the p menu as below:arental control
Parental Control Menu
Password Set
Master Lock
Unrated Lock
US Ratings
Canadian Rating
Off
Off
To M ov e To S el ec t To E xi t
Exit
Password Set
Press Enter to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the
password when you input the new one twice.The initial password is 0000 .""
Enter Old Password
Parental Control
Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password.The initial password is 0000 .""
Candlan Rating Menu
Candlan English Candlan French
E
C
C8+
G
PG
14+
18+
E
G
8ans+
13 ans+
16 ans+
18 ans+
Enter
ToMove To Select To Exit
Exit
18
Page 20
Menu Operation
Closed Captions
This item allows you to set the closed caption, and press Enter to enter Closed Caption Options menu as below:
Closed Caption
CC Mode
Analog CC
Digital CC
Advanced CC Settings
ToMove To Select To Exit
Enter
CC Off
CC1
CS1
Exit
VGA menu options
Press MENU on the front panel or on the remote control and then use / to select the Feature menu in VGA mode.
Picture
Audio
Setup
Feature
Time Set
Sleep Timer
Advanced Video Menu
VGA Set
ToMove To Select To Exit
Enter
Exit
Off
1. Use / to select what you want to adjust in the
menu.Feature
2. Press button to adjust.
/
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
VGA Set
Press / button and then use Enter to enter the VGAset menu as below:
VGA Setting-1024x768@70Hz
H-Position
V-Position
Clock
Phase
Auto Adjust
Setting
H-Position
Press / button and then use / adjust the horizontal position of the picture.
V-Position
Press / button and then use / adjust the vertical position of the picture.
Phase
Press / button and then use / to adjust the phase of the picture.
50
50
50
50
Preset
To Move To Select To Exit
Enter
Exit
19
Page 21
Menu Operation
Clock
Press / button and then use / to adjust the clock of the picture.
-Position This function is to adjust the picture to Left/Right
and Up/Down as you prefer.
-Phase This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
-Clock This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size also will change.
Auto Adjust
Press / button and then use / to do auto adjust that automatically adjusts the available options for the best viewing
configuration.
Setting
Press Enter to do preset that can return to the factory setting.
Component menu options
Press MENU on the front panel or on the remote control and then use / to select the Feature menu in YPbPr mode.
Picture
Time Set
Sleep Timer
Off
Advanced Video Menu
Audio
Component Set
1. Use / to select what you want to adjust in the
Setup
menu.Feature
2. Press and button to adjust.
Feature
ToMove To Select To Exit
Enter
Exit
3. When you are satisfied with your adjustment, press
to exit the main menu.MENU
Component Set
Press / button and then use Enter to enter the Component set menu as below:
Component Setting-720x480I@30/29.97Hz
H-Position
V-Position
Clock
Phase
Auto Adjust
Setting
50
50
50
50
Preset
To Move To Select To Exit
Enter
Exit
20
Page 22
Troubleshooting and advice
7. TROUBLESHOOTING AND ADVICE
Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.
Troubleshooting
No signal
No color shades
Stain show on the
screen.
Double or multiple
display image
Snow on the screen
The remote control
does not work
"Zip" made noise on
TV cover
Control
Please check that all cables and cord's are correctly plugged in.
Adjust the contrast, the color and the brightness
May be result from a lighting signal from car, motor, neon light and
other electrical devices or appliances.
May be the result of an electrical wave disturb from other TV,
Computer and Game machine or Radio
The cables of the antenna are not correctly plugged in.
Please check the batteries order and alignment.Check that the IR
of the remote control is not hidden by something.
Even if the display image is correct, the noise may come from an
unsteady fixation of the panel.
No sound
Make sure that you have not press the MUTE button of the panel
or of the remote control.
21
Page 23
Specifications
8. SPECIFICATIONS
Screen Size
Display Type
Resolution(Pixel)
Aspect Ratio
AC INPUT
TV System
Video Input Format
Antenna Input
Audio Output
HDMI
S-Video
Input
Audio (AV/S-Video/PC)
PC
42Inch
TFT LCD
1920 X 1080
16:9
AC 110 240V 50 60Hz 220W-/
NTSC
PAL/NTSC
Standard antenna socket 75Ω
L/R W2X8
Standards TMDS Max. 1080i
Y:1.0Vp-p±3db C:0.3Vp-p±3db
640 480/60Hz 800 600/60Hz 1024 768/60HzXX X
R/L 200mVrms (max3.0vp-p) 20K RCAΩ
Weight
Dimensions (with stand)
This manual is only for your reference, any change to the design and specification will not
be advised.
46.5 Wx36.8 Hx14.6 D"""
14 2lbs.
22
Loading...