Bluetooth Wireless Streaming, Handheld Microphone,
MP3/USB/Micro SD/FM Radio (12’’ -inch, 700 Watt)
Page 2
To be sure you take maximum advantage of all the speaker has to oer,
read these instructions carefully and use the set properly. Be sure to keep
this manual for future reference, should any questions or problems arise.
CAUTION:
No user serviceable parts inside. Please return to the agents or a similarly
qualied service centre for repair.
SAFETY INSTRUCTION
1. Please read the user manual carefully before use.
Retain for future reference.
2. All warning on the appliance and in the user manual should be adhered to.
3. Do not use the appliance near water.
4. Ventilation-do not block any of the ventilation openings.
• Do not install near any heat sources or re.
• Do not install in an airtight location.
5. Keep the cord and plugs in good order.
6. The unit may be wiped down with a damp cloth once the unit has been
switched o and the plug removed.
7. Unplug the during lighting storms or when not in use for long periods of
time.
8. Keep foreign objects and liquid from entering the unit to avoid short
circuit, re and electrical accident.
9. Keep the appliance in a dry location.
10. Refer all servicing to the agent or a similarly qualied service centre for
repair.
Front Board Function
www.PyleUSA.com
1 2 34567
2
Page 3
Front Board Function
1. USB/Micro SD/FM/BT/AUX selection
2. Working status display window
3. MP3 last song/FM last frequency/Vol-
4. MP3 pause or play/FM auto scan frequency
5. MP3 next song/FM next frequency/Vol+
6. Record & Play
7. Mic priority
NOTE:
• The USB/Micro SD Memory Card input is ONLY meant to connect to a
USB/Micro SD Memory Card ash driver (thumb drive). Connecting a MP3
player or computer .directly to the USB/Micro SD Memory Card ash drive
input will result in the unit failing to play the audio from those devices.
• When in BLUETOOTH mode, it will auto search and match the Bluetooth
you are using. After matching the Bluetooth, “PyleUSA” will show on the
display screen and from the Bluetooth devices, you can easily nd out
“PyleUSA” Bluetooth name.
BACK BOARD FUNCTION
10
12
13
11
6
7
8
9
1
2
3
4
5
3
www.PyleUSA.com
Page 4
1. Mic jack and Guitar jack
2. Indicator light for charging states ( red color for charging, green color is
full charged)
3. Light ON/OFF
4. 12V DC charge
5. Electricity supply AC 120V -240V, 50/60Hz
6. The music volume: Adjust the musical instrument
7. Treble adjustment
8. Bass adjustment
9. USB/Micro SD Memory Card connector
10. Audio input: Audio signal input can connect DVD/VCD/AUX etc.
11. Mic echo adjustment
12. Mic volume adjustment
13. Power ON/OFF
REMOTE CONTROL
Remote Control Function
1. Standby mode
2. 0~9 Song selection
3. EQ selection
4. Play repeat
5. MP3 last song/FM last frequency
6. Sound volume “ - ”of main channel
7. MP3 pause or Play/FM scan frequency
8. Sound volume “ + ”of main channel
9. MP3 next song/FM next frequency
10. Shift between USB and Micro SD Memory Card
11. Mute
12. MP3/FM/BT/Aux input selection
The power switch must turn to “OFF” after using the speaker. Otherwise, the
host built- in will continue to discharge the battery, eventually leading to the
battery damage. If you will not use this speaker for a long time, you still have
to charge the unit to protect the battery, our suggestion is that the battery
needs to be charge every month. Otherwise, the electricity will be consumed
and the battery will not charge again and will cause the speaker not to work
in DC.
4
www.PyleUSA.com
Page 5
1. When noise occurs during use,
staccato, or distortion, please replace
the battery.
2. After use, please turn o the power
switch.
3. When not in use for a long time,
please remove the batteries to avoid
MIC
leakage of battery acid corrosion of
internal parts.
ON/OFF
4. When turn on the power switch, such
as the power indicator does not light
or too dark, check whether the
Battery
Cover
battery polarity is placed correctly or
not.
Simple Troubleshooting
SymptomPossible ProblemSolution
No function
light
& no sound
Function light
ON
but no sound
1. Plug is not well connected
2. Speaker power button is not
turned ON
1. Cable misconnected
Insert the plug into
electrical outlet
Turn ON the button
Turn o the power, check
the input jack to ensure
proper audio signal is
connected to relevant
input jack
2. Speaker are not connected
or misconnected
3. Audio signal is not transmitted
to speaker
If the problem exists after checking related procedures above, please refer to the
appointed service agent or professional technician to x it. Do not attempt to open
the cover, otherwise we assume no responsibility
5
Power o, then check and
conrm the cable
connection again
Check all the speaker if
there is audio signal output
www.PyleUSA.com
Page 6
PSUFM1280B
Portable PA Speaker System Bundle Kit
with Built-in LED Lights, Rechargeable Battery, Bluetooth Wireless Streaming,
Handheld Microphone, MP3/USB/Micro SD/FM Radio (12’’ -inch, 700 Watt)