Pyle PSBV200BT Owner's Manual

PSBV200BT

OWNER’S MANUAL

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

300 Watts Bluetooth Sound Bar

Systems W/ USB SD FM Radio&

Wireless remote

STANDBY

INPUT

USBSD

PSBV200 BT

1PC Owner’s Manual

PACKAGE CONTENTS

1PC Remote Control

2PCS AAA Batteries

1PC 3.5mm/3.5mm

plug connection cable

IMPORTANT SAFETY INSTRUCTIONS

Warning:

The lighting flash with arrowhead symbol, within an equilateral
triangle, is intended to alert user to the presence of uninsulated

"dangerous voltage" within the product's enclosure, that may be
of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is i
alert the user to the presence of important operating and servicing
instruction in the literature accompanying the appliance.

ntended to

1. Read these instructions
All the safety and operating instructions should be read before the product

is operated.

2. Keep these instructions
The safety and operating instructions should be retained for future reference.

3. Follow all instructions
All operating and use instructions should be followed.

4. Do not use this apparatus near water

Do not use this product near water and moisture, for example: near a
bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool.

5. Clean only with dry cloth
Unplug this product from the wall outlet before cleaning. Do not use liquid

cleansers or aerosol cleansers. Use a dry cloth for cleaning.

6. Do not block any ventilation openings.
Slots and openings in the cabinet and in the back or bottom are provided

for ventilation, to ensure reliable operation of the product and to protect it
from overheating. These openings must NOT be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface.

7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus(including amplifiers) that produce heat.

8. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles and the point where they exit from
the apparatus.

To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
Dangerous high voltages are present inside the enclosure. Do
not open the cabinet, refer to qualified personnel only.

10. Unplug this apparatus during lightning storms or when unused for
long period of time.

11. Power Source
The product should be operated only from the type of power source

indicated on the rear of the unit.

12. Overloading

Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.

13. Object and liquid entry

Never push objects of any kind into this product through as they may
touch dangerous voltage points or short out parts that could result in fire
or electric shock.
Never spill or spray any type of liquid on the product.

14. Service

Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.

Entire wooden case, piano style painted front panel with blue backlight
LCD display.
3D technology for true surround sound.
FM stereo radio with automatic search and can store 30 stations.
USB 2.0 host and SD/MMC connector for external moving HD, flash
drive, SD/MMC card, can play MP3, WMA format music.
INPUT, STANDBY,( )PLAY/PAUSE/PHONE, ( )VOL + and ( )
VOL - buttons.
AUX1, AUX2, PC/MP3/FM ANT inputs.
Bluetooth & handsfree functions.
1x 5.25" woofer, 2x3" full range speaker and 2x1" tweeter.
With remote control

FEATURES

Take advantage of 3D stereo technology, you can listen to surround
sound without extra speakers. Placing your system as follows, and turn
on BASS +/- or TRE +/- effect by pressing these Buttons on the remote
control, you will get the surround sound effects.

PLACING THE UNIT

Power Supply---------­Peak RMS Output--------------------------------------------------------------------300W
Input Sensitivity---------------------------------------------------------- 400mV±50mV
S/N(A Weight)---------------------------------------------------------------------- 80dB
Channel Separated Rate(1KHz)----------------------------------------------- 40dB
Woofer Impedance----------------------------------------- -----------------------8 Ohm
Tweeter and full range speaker Impedance----------------------------------4 Ohm
THD(1KHz, 1W, 8Ohm)---------------------------------------------------------- 0.5%
Frequency Response------------------------------------------------------ 20Hz-20KHz
Dimensions(WxDxH)------------------------------------------------- 605x250x120MM
Weight---------------------------------------------------------------------------------5.3KGS

-----------------------------------------

-

-

-

--

-

-

-

AC:100~120V, 50/60Hz

NOTE: Specifications are subject to change for improvement without
prior notice.

SPECIFICATIONS

Insert the power plug into a wall socket. Make sure
the voltage marked at the rear panel is same as
your AC power. Do not operate with wet hands to
avoid electric shock.

Socket

Power plug

SYSTEM CONNECTIONS

1. CONNECT POWER SUPPLY

2. CONNECT WITH PC/MP3

To listen to the sound source from PC (Computer) or MP3 Players,
connect the unit with the external device as below:

MP3

PC

3.5mm mini plug
connection cable

AUDIO IN

DC:18V/2.5 A

STANDBY

INPUT

USBSD

PSBV200BT

3. CONNECT WITH TV/DVD

DVD Audio Out

To listen to the sound source from Television and/or CD/VCR/DVD/DVR
players, connect the unit with the external device as below:

Audio In

DVD Video Out

TV Video In

TV

CD/VCR/DVD/DVR Players

L R

TV Audio Out

L

R

AUX 1 AUX 2

INPUT
SELECT

P C/MP3

Audio In

1

1. PC Mp3

2. AUX 1 L+R input jacks.

FM ANT input jack.

BACK PANEL FUNCTIONS

FRONT PANEL FUNCTIONS

L

R

AUX 1 AUX 2

FM ANT
PC/MP3

3. AUX 2 L+R input jacks.

4. DC: 18V/ 2.5A .

1. Power switch

2. Standby

3. Input

4. Play/pause/phone

5. LCD display

6. Power indicator

7. Remote sensor

8. Pre / VOL-

9. Next / VOL+

10. USB host

11. SD/MMC slot

1 2 3 4 5

9

10

11

7

8

6

2

3 4

STANDBY

INPUT

USBSD

PSBV200B T

STANDBY

INPUT

D

C

:

1

8

V

/

2

.

5

A

INPUT
SELECT

INPUT
SELECT

DC:18V/2.5A

1. STANDY-BY: Press to turn on the unit
from standby model. Press again to turn
the unit off(stand-by).

2. 3D:

MUTE:

CH+: In FM radio mode, press to search

the stored upper channels.

6.EQ: 11 Mode for choose, in FM mode press
choose stereo or mono

Card, USB mode or BLUE mode press to
choose previous file, press and hold to fast rewind;
in FM radio mode press to go to lower

Card, USB mode or BLUE mode press to play/pause; in FM radio

mode press to store

Card, USB mode or BLUE mode press to choose next file, press& hold

to fast forward; in FM radio mode press to go to upper

11. CH-:

Press to turn on the surround

sound effect. Press again to turn it off.

3. Press to turn off the sound
temporary, press again to turn the sound
back.

4. INPUT: Press repeatedly to select the
input source as desired.

5.

7. : In

frequency radio stations.

8. : In

the current radio station into the memory.

9. : In

frequency radio stations.

10. Scan: in FM mode press to auto search and store working stations, in BLUE
mode press enter paired mode then display show” 0000".

In FM radio mode, press to search the stored lower channels.

12. REPEAT: in music model press for choose repeat ONE or ALL

13. VOL -: Press to reduce the sound level..

14. VOL +: Press to increase the sound level.

15. Bass-: Press to reduce the sound level of woofer

16. Bass+: Press to increase the sound level of woofer.

17. TRE-: Press to reduce the Treble

18. RESET: Press to reset the sound level to default setting.

19. TRE+: Press to reduce the Treble

REMOTE CONTROL FUNCTIONS

STAND-BY 3D MUTE

EQCH+INPUT

TUNE-

M

TUNE+

REPEATSCN

CH-

- VOL +

- BASS +

RESET

TRE-

TRE+

1

2

3

4

6

5

7

8
9

10

11

12

13

14

15

16

17

19

18

HOW TO USE THE REMOTE CONTROL

1. Battery Installation:

a. Slide and lift up the battery door.
b. Install two "AAA' size batteries (included) into the battery compartment
according to the polarity markings inside battery compartment.
c. Replace the battery door.

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the
batteries as indicated next to the battery compartment.
Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together(e.g. Alkaline,
Rechargeable and Carbon-zinc) or old batteries with fresh
ones.

4. If the device is not to be used for a long period of time, remove
the batteries to prevent damage or injury from possible battery
leakage.

5. Do not try to recharge batteries which are not designed to be
recharged. They can overheat and rupture.

6. Do not dispose of batteries in fire. Batteries may explode or
leak.

BATTERY PRECAUTIONS

2. Effective scope of the remote control

The remote control has an operating range which is less than 16 feet
and at 30 degree angle left or right away from the system.

NOTES:

When there is an obstacle between the unit
and the transmitter, the transmitter may not
operate.
When direct sunlight, an incandescent lamp,
fluorescent lamp or any other strong light
shines on the remote sensor of the unit, the
remote operation may be unstable.

30

30

Appro x 16 fe et

STANDBY

INPUT

USBSD

PSBV200BT

1) Press the POWER button on the front panel of the unit to turn the

unit to Standby mode.

2) Press the STANDBY button on the unit or remote control to power
on the unit.

3) Press the INPUT button on the unit or remote control repeatedly to
select the input sources to USB, CARD, FM radio, Blue, AUX1,
AUX2, PC as desired.

4) Hold Press the ( or )VOL +/- buttons on the unit or press it
on remote control to adjust volume as desired. Short press ( or

) for choose PRE or NEXT song.

5) Press the Bass +/- buttons on the remote control to adjust the
sound level of woofer.

6) Press the 3D button on the remote control to turn the Surround
Sound Effect ON, press again to turn it OFF.

7) During listening, press the MUTE button on remote control to turn
off the sound temporary (MUTE will appear on the display), press
again to turn the sound back on.

8) During listening, press the RESET button on the remote control to
reset the sound level to default settings.

9) When finished listening, press the STANDBY button on the unit or
remote control to turn off the unit(Standby mode).

NOTE: If you will not use the unit for long period of time, press the

POWER button on the front panel of the unit to cut off the AC
supply.

OPERATIONS

1. GENERAL OPERATION

1. Power ON the unit as previous procedures.

2. Press the INPUT button on the unit or remote control repeatedly until
FM frequency appears on the display.

3. Press or button on remote control repeatedly to search the
specific radio stations. (To search the radio stations in auto mode:
Press and hold or button two seconds then release the button.
The unit will auto search the next available radio station then stop.
Repeat above procedure to search all available radio stations.)

4. To store the current received radio station into the memory. Press the
MEMORY( ) button on the remote control, CH 01 will appear on the
display. Press the CH+/CH- buttons repeatedly to select channel number
as desired. Press the MEMORY button again to stored the current radio
station to the selected channel.

5. To listen the preset channels, press the CH+/CH- buttons on the remote
control repeatedly until the desired channel appears on the display.

6. Press the EQ button on the remote control repeatedly to select
stereo or mono as desired. STEREO or MONO will appear on the display

7. Press the SCAN button on the remote control to auto search the working
radio station and auto store in memory then press CH+ or CH- to choose
the desired radio station.

2. LISTEN TO FM RADIO

Connect the supplied 3.5mm audio cable to FM ANT jack on the rear of the
unit as the figure below. Extend the wire and relocate it to get the
best reception.

L

R

AUX 1 AUX 2

INPUT

SELECT

PC/MP3

DC:18V/2.5A

3. SD/USB SLOT OPERATION

Before connecting USB flash drive or SD cards please make sure they
are in right direction. Refer following figure.

1.

2. Insert SD cards to SD slot and/or USB memory stick to USB slot.

3.

play the MP3/MWA songs automatically.

5. Press or button on the remote control to choose previous
or next songs. Press and hold the buttons to fast rewind/fast forwar.

6. When you turn off the unit and turn it on again, the unit will
automatically play the last song which you played before turnoff.

Power ON the unit as previous procedures.

Press INPUT button on the unit or remote control repeatedly until
CARD or USB is displayed. To play files in USB, choose USB.
To play files in SD card, choose CARD.

4. The unit will

4. HOW TO OPERATE BLUETOOTH FUNCTIONS

1. Press “INPUT” to enter “BLUE” mode then unit will auto show "0000" on
display when connecting with your mobile phone in first times. (The unit
will auto enter “BLUE” mode when there aren’t any USB sticker or SD cards
in unit)

2. Use mobile phone bluetooth search and choose” BT-speaker” enter” 0000"
for paired with unit. The unit will control your mobile phone music by press
“( )” or ( )VOL + and ( ), these keys had same function with “USB/

CARD” mode. ”

3. When mobile phone had a call the unit will show “CALL” press” ” to listening
phone and the meanwhile you will enter handsfee mode, the effect distance will be
1 meter. Hang up by repeat press “ ” the unit will resume to play music.

4.The bluetooth of Unit will auto search and connecting with the last mobile phone

after power off.

5. Our products had pass BLUETOOTH BOB certificates

Note: FCC ID
This device comply with parts 15 of the FCC rules.
Equipments Regulations
Operations is subject to the following tow conditions
(1) The device may not cause harmfull interference and
(2) The device must accept any interference received, including
interference that may cause undesired operation.

PYLE MISCELLANEOUS PARTS

MISC ACCESSORIES