Pyle prmc100 Operation Manual

OPERATION MANUAL

Prof essio nal Man ufact urer An d Globe l Leade r For Mon ey
Coun ter And C ounte rfeit D etect or

CONTENT

1. Ill ustra tion ---- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ------ ----- ----- ----- -

2. Gen eral instr uctio n.--- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ---

3. Saf ety ins truct ions- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----

4. Pow er u p---- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ---

5. Cou nting f uncti on--- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----

6. Cou nterf eit det ectio n---- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ---

7. Fak e mone y alar m---- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----

8. Err or co de an d sol ution ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- --

9.H opper adj ustme nt - ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -----

10. Count ing rol ler rep lacem ent-- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----

11. Mai ntena nce-- ----- ---- ----- ----- ----- ----- ----- ---- ----- ----- ----- ----- ----- ---- ----- ----- --

12. Speci ficat ion-- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----

13. Speci al fu nctio n---- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ---

1

2

2

2

2-3

4-5

5

6

6-7

8

8

8

8

2.Gene ral instruct ion

On the basis o f all our former mo dels of bankn ote counter, we d esigned
and devel oped this new mo del.
It concen trates on all th e advantag es which the for mer models of
bankno te counter ado pts and meanw hile develo ps more other
advant ages of its own kin d
This mode l counts at a rate of 10 50pcs/mi n for both PAPER&P OLYMER
notes. It in cludes UV/ MG/MT count erfeit dete ction func tion; ADD and
BATCH funct ion.
Detect co unterfei t banknotes d uring the coun ting proce dure will sav e
your time an d money durin g your manage ment accoun ting opera tions.
It can be used in b anks, shops , supermark ets, movie th eaters, hot els,
restau rants; etc. wh ere the money is u sed. .
We recomm end the user to ver ify the gift box co ntains all of t he items
listed he re:

1. machin e body 2. operat ion manual 3. be lt(optio nal)

4. fuse 5.br ush 6.plug

7. extern al display( optional )

1

2

1. Illus tration

3.Safe ty instructi ons

4.Powe r up

5.Coun ting functio n

--Read a nd underst and all of the ins tructio ns and warni ngs both on the
machin e and manual.

--Foll ow all warni ngs and instr uctions ma rked on the un it.

--This p roduct sho uld be operat ed only from th e type of the pow er
source in dicated in t he user's gui de. If you are no t sure of the typ e of
power sup ply in your loc ation, con sult your de aler or loca l power
compan y.

--Only u se the cable pr ovided wit h the unit. The u se of other cab le may
result in e lectric sh ock, fire or ca use seriou s damage to the u nit.

--Neve r push objec ts of any kind int o the unit thr ough case slo ts, since
they may to uch danger ous voltag e points or sho rtcut part s, resulti ng
in a risk of fir e or electric s hock.

--Unpl ug this prod uct from the wa ll outlet an d refer servi cing to qual ified
servic e personne l under the fol lowing con ditions :
a. When th e power supp ly cord or plug i s damaged or fr ayed.
b. If the li quid has been s pilled int o the unit.

c. If the un it has been exp osed to rain or w ater.
d. If the ma chine has bee n dropped or t he case has bee n damaged.
e. If the pr oduct show s a noticeab le change in pe rformanc e.

--To reduce t he risk of elec tric shock , do not disass emble this p roduct.
Take it to quali fied servi ce personn el when serv ice or repair w ork is
requir ed. Openin g or removing c overs may ex pose you to dan gerous
voltag es or other ris ks. Incorr ect reasse mbly can cau se electri c shock
when the ap pliance is su bsequen tly used.

--Do not us e the unit if the po wer cord is dam aged or if the pl ug socket
contac t is loose. Don ’t follow the se instruc tions may oc cur in elect ric
shock , fir e or other haza rds.

--When u npluggin g the power plu g, do not pull it b y the cord but rat her
grip the pl ug and pull it out , don’t foll ow those ins truction m ay occur
electr ic shock, fir e or damage to th e unit.

Connec t the power cor d to the machin e (power out let), then p lug it to
power so urce and turn t he switch on; t he unit will co nduct a self -check
by spann ing the feedi ng roller wh ile the MG and/ or UV/IR fun ctions wil l
be autom atically t urned on by def ault. The cou nting dis play will sho w“0”
when the un it is ready <th e machine is i n its normal wo rking cond ition>.

1>Coun ting Funct ion

-Once th e bills are cor rectly pla ced in the hopp er, the machin e will start
counti ng automat ically (ex cept in the man ual count ing mode). Th e
number o f counted bil ls will be show n on the count ing displa y. Moreover,
once the bi lls are remo ved from the st acker, the cou nting disp lay will be
clear an d the batch dis play in turn wi ll show the num ber of count ed bills

Handle

Hopper

Impeller

Stacker

Frontal platform

Rotary LCD screen
or LED screen

UV frame

Bill thickness
adjustment screw

Power switch

External
screen jack

Power outlet

Exiting roller

Counting sensor

Feeding roller

Preset sensor

External screen

Control panel

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully uA t o m a t i c

oney

ounter

m c

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully uA t o m a t i c

oney

ounter

m c

(Optional)

3

4

6.Coun terfeit Dete ction

Instea d.

-Bills s hould be corr ectly plac ed as indica ted in the foll owing step s:
Place th e bills betwe en the count ing guides a s shown in the fig ure 1,
then pus h the bills bac kward to make t hem lay on the to p of the hopper
plate, i n the correct c ounting po sition as sho wn in the figu re 2.

< NOTE >

added b ills wil l be shown on t he count ing scre en. Pres s the“ADD”
butto n to close th e functi on and cle ar the cou nting di splay.

3>Bat ch Funct ion

--The p reset ba tch func tion can be p erform ed by pres sing the“B ATCH”
butto n (the BATCH i ndicat or will ap pear). By d efault , when pre ssing
the“BATCH”b utton, t he batch f unctio n is turn on. T he batch n umber
can be se t in amount s betwee n 1and 999 b y pressin g No.“+”&“-”
butto n. To clear thi s functi on, pres s the “BATCH ”butto n until th e
indic ator is of f.

--Und er the bat ch count ing mode , once the ho pper is lo aded, th e
machi ne will st art coun ting and st op when th e counte d quanti ty
reach es the pre set batc h one.

--To repe at the bat ch count ing opera tion und er the sam e preset b atch
quant ity, just re move the c ounted b ill from th e stacke r. The unit w ill
batch t he next gro up of bill s under th e same sett ings.

--If yo u wish to kee p batchi ng witho ut remov ing the pr eset num ber,
press t he“RESET”b utton.

--If th e counte d number d oes not equ al with th e preset b atch numb er,
the cou nter dis play wil l show the qu antity w ith blin king num ber.

--Whe n counti ng with MG a nd/or UV de tectio n on, the ma chine wi ll
stop au tomati cally wh en detec ting coun terfei t curren cy. This fun ction
can be re sumed by re moving t he dubio us bill fr om the stac ker and
press ing“RESE T”button .

2>Add ition Fu nction

Addit ion func tion can b e perfor med by pres sing the“A DD” butto n
(the ADD i ndicat or will ap pear). I n this case , removi ng the cou nted
bills f rom the st ack will no t clear th e quanti ty count ed and show n on
the cou nting di splay. The n ext bill s placed in t he hoppe r will be
count ed and add ed to the pre ceding q uantit y. The total a mount of

<UV( Ultrav iolet ) detect ion fun ction <a vaila ble for th e model w ith UV

detec tion or t he model w ith bot h UV and MG/ MT dete ctions >

---u sed to che ck all kin ds of ban knote s which co ntain s UV featu res.

--The U V funct ion is aut omati cally tu rned on b y defaul t when th e

mach ine is pow ered up. I t can als o be selec ted or de select ed by
pres sing the“C F”butto n locate d in the fu nction c onsol e.

--If th e machi ne detec ts a coun terfei t note wh en count ing, it w ill stop

and emi t beepi ng sound , while t he batch d ispla y will sho w the
mess age“d1”and t he UV indi cator w ill bli nk (aler ting th e user of th e
pres ence of a du bious bi ll). Th e dubiou s bill wi ll alway s be the la st
one on th e stack er. Remo ve the dub ious bi ll, pres s“RESET”b utton
to cont inue.

--The s ensit ivity o f UV detec tion can b e adjus ted. Hol d“BATCH”

butt on for 3 sec onds, th e batch d isplay w ill sho w the curr ent
sens itivit y level“S E4/120”, then ke ep press“+” “-”but ton to
choo se the des ired sen sitiv ity lev el (rang e from 0- 200). Aft er choo sing
the lev el, pre ss“RESE T” button t o confir m/sav e. Do not ch ange
othe r unment ioned s etting s, chan ging oth er sett ing may ca use
impr oper wor king co nditio n.

--The s malle r numbe r means th e higher s ensit ivity y ou set and“0”

mean s deacti vate th is detec tion fu nction .

<MG (M agneti c)/MT (Magne tic thr ead) det ectio n functi on <ava ilable

for the t he mode ls with bo th UV and M G/MT det ectio ns>

---u sed to che ck all kin ds of ban knote s which co ntain s the ment ioned
feat ures.

--Th e MG/MT fu nctio n is autom atica lly turn ed on by de fault wh en the

mach ine is po wered u p. It can a lso be se lecte d or dese lecte d by
pres sing th e “CF”butt on loca ted in th e funct ion con sole.

--If t he mach ine det ects a co unter feit no te when c ounti ng, it wi ll stop
and em it beep ing sou nd, whi le the ba tch dis play wi ll show t he
mess age“d2” an d the MG/ MT indi cator w ill bli nk (ale rting t he user
the pr esenc e of a dubi ous bil l). The d ubiou s bill wi ll alwa ys be the l ast
one on t he stac ker. Rem ove the d ubiou s bill, p ress“RE SET”but ton
to con tinue .

--Th e sensi tivit y of MG det ectio n can be ad juste d. Hold “ BATCH” b utton
for 3 se conds u ntil th e batch d ispla y will sh ow the cu rrent s ensit ivity
leve l“SE5/5 ,”press“+” “-”but ton to ch oose th e desir ed
sens itivi ty leve l (rang e from 0- 50). Aft er choo sing th e level , press“
RESE T”butto n to conf irm sav e. Do not c hange o ther un menti oned
sett ings, c hangi ng othe r setti ng may ca use imp roper w orkin g
cond ition .

--Th e bigge r numbe r means t he high er sens itivi ty you se t and“0”
mean s deact ivate t his det ectio n funct ion.

--Th e UV and MG /MT det ectio n can be us ed at the s ame tim e while
coun ting to m ultip ly the ch ances o f detec ting a co unter feit bi ll. By
defa ult, th e UV and MG /MT det ectio n funct ions ar e autom atica lly tur n
on whe n the uni t is powe red up. T hose fu nctio ns can al so be sel ected
or des elect ed by pre ssing “C F”butto ns.

<IR (I nfrar ed) Det ectio n Funct ion <av ailab le for th e model s with UV
dete ction o r the mod el with b oth UV an d MG/MT d etect ion>

---u sed to ch eck all k inds of b ankno tes whi ch with t hichn ess pro blem.

--By d efaul t, serv ing as a su pplem entar y funct ion, th e IR dete ction
can be a ctiva ted whe n the uni t is powe red up.

--Th e sensi tivit y of IR det ectio n can be ad juste d. Hold “ BATCH” b utton
for 3 se conds , the bat ch disp lay wil l show th e curre nt sens itivi ty leve l
Note :hold ”BATCH "butt on for 3 se conds , "SE5 /" is us ed to adj ust "M G1"
sens itivi ty leve l, "SE 6/" is us ed to adj ust “MG 2" sens itivi ty leve l.

Figure 1. Put t he bills by this d irection Fig ure 2. Push the b ills backwar d.

The co untin g mode ca n be chan ged bet ween Aut omati c and
Manu al. Pre ss the“AU TO”butt on, if th e batch d isplay s hows
“AUTO”t he mach ine is in a utoma tic cou nting m ode; If wi thout
the“AU TO”show n in the di splay, th e machi ne is in ma nual
coun ting mo de, und er this m anual m ode, pr ess the“R ESET”
butt on afte r placi ng the bi lls to st art cou nting .

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully

uA t o m a t i c

oney

ounter

m c

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully

uA t o m a t i c

oney

ounter

m c

5

6

“SE7/ 25”then p ress butt ons to ch oose th e desir ed “+”“-”
Sens itivi ty leve l (rang e from 0- 255). Af ter cho osing o f the lev el, pre ss

“RESE T”butto n to conf irm.

<Dou ble Det ectio n funct ion <av ailab le for th e model s with UV
dete ction o r the mod el with b oth UV an d MG/MT d etect ion>.

---u sed to ch eck a dou ble-n ote

--By d efaul t, serv ing as a su pplem entar y funct ion, th e detec tion ca n
be act ivate d when th e unit is p owere d up.

--If t he mach ine det ects a do uble- note wh en coun ting, i t will st op and
emit b eepin g sound , while t he batc h displ ay will s how the m essag e
“d3”(al ertin g the use r the of th e prese nce of a do uble- note) . The
doub le-no te will a lways b e the las t one on th e stack er. Remo ve the
dubi ous bil l, pres s“RESET”b utton t o conti nue.

<Hal f-not e Detec tion< avail able fo r the mod els wit h UV dete ction o r
the mo del wit h both UV a nd MG/M T detec tion> .

---u sed to ch eck hal f-not e.

--By d efaul t, serv ing as a su pplem entar y funct ion, th e half- note
dete ction c an be act ivate d when th e unit is p owere d up.

--If t he mach ine det ects a ha lf-no te when c ounti ng, it wi ll stop a nd
emit b eepin g sound , while t he batc h displ ay will s how the m essag e
“d5”ale rting t he user t he pres ence of a h alf-n ote bil l). The d ubiou s
bill w ill alw ays be th e last on e on the st acker. R emove t he dubi ous
bill , press“R ESET”bu tton to c ontin ue<th e count ing dis play wi ll
clea r>.

1. It i s highl y recom mende d to cont act the a uthor ized se rvice c enter
or loc al deal er befo re you do t he abov e adjus tment s.

2. Im prope r adjus tment s may cau se impr oper wo rking c ondit ion or
fals e detec tion re sults .

CAU TION:

7.Fake m oney alarm

Fake money or questionable money

When fake money pa ss the machine, the
counting wil l stop and alarm. The funct ion
display will sh ow the error code. The last
note on the stacke r normally is the fake
money. The machine co unting quantit y
number is not incl uded in this note. remov e
the fake money. Press“R ESET”button,
the machine wil l start counting aga in.

8.Erro r code and solut ion

The batch di splay may show s ome error code w hen counting ,
which mean s there are some p roblems with t he machine.
Refer to the f ollowing dia gram to find way t o solve it.

Remove the s uspicious bi ll on the
stacker, pre ss “RESET”to
continue ;
Lower the UV s ensitivity.

Suspicious bill detected by
UV system;
Problem in the UV system.

Message

Error

Soluti on

Suspicious bill detected by
MG/MT system; Problem in
the MG/MT system.

Remove the s uspicious bi ll on the
stacker,pr ess “RESET”to
continue ;
Lower the MG /MT sensitiv ity.

Double-note detected by
IR system;
Problem in the IR system.

Remove the s uspicious bi ll on the
stacker, pre ss “RESET” to
continue ;

Lower the IR s ensitivity.
Note of size problem
detected by size detection
system; Problem in the size
detection system.

Remove the s uspicious bi ll on the
stacker, pre ss “RESET” to
continue ;
Lower the si ze checking se nsitivity.

Half-note detected by
half-note detection system;
Problem in the half-note
detection system.

Remove the s uspicious bi ll on the
stacker,
press “RESE T”to continue.

Message

Error

Soluti on

Gene rally s peaki ng, mos t of the ab ove-m entio ned pro blems
may be c aused b y dust or d irt ins ide of th e machi ne. So
keep ing the m achin e clean i s highl y recom mende d .

< NOTE >

Problem wi th the

speed sens or

Clean the se nsor or replac e it

Problem wi th the

right coun ting sensor

Clean the se nsor or replac e it

Problem wi th the left

counting s ensor.

Clean the se nsor or replac e it.

E01

Problem wi th the
auto start s ensor

9.Hopp er adjustmen t

--When imp roper feedin g of bills occur, adjus t the feeding thic kness
setting in the ho pper by turning th e adjustor scre w located in the back
of the machine to en sure proper fee ding.

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully uA t o m a t i c

oney

ounter

m c

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully

uA t o m a t i c

oney

ounter

m c

3

Slope-note detected by slope­note detection system;
Problem in the slope-note
detection system

Remove the bill fro m the stacker.
Press “RESET” to co ntinue.

Chain-note detected by chain­note detection system;
Problem in the chain-note
detection system

Remove the bill fro m the stacker.
Press “RESET” to co ntinue.

Problem wi th the

UV sensor

Problem wi th the

preset sen sor

Clean the se nsor or replac e it

Clean the se nsor or replac e it

Clean the se nsor or replac e it

E02

E03

E04

E05

E10

12.Spe cification

Dimens ion : 298mm X 240mmX 198 mm
Bankno te Size : Min 50 x 100, Max: 80 x 17 0mm
Net Weigh t : 4.5kgs
Gross Wei ght : 5.0kg s
Counti ng Speed : ≥1050pcs/min
Batch Ra nge : 1-100
Counti ng Display : LCD displa y or LED displa y
Power Su pply : DC85 -250V
Power Co nsumptio n : ≤70W

7

Steps:

1. Loosen the pr otector scre w (using a screwdr iver) as shown in fig ure 1

2.Turning cloc kwise the adjus tor screw to tight en the feeding hop per, shown in figure 2.

3.Turning coun ter clockwis e the adjustor scr ew to loosen the feed ing hopper, shown in fi gure 3.

4.After adj usting the corr ect level and coun ting performa nce is normal, tig hten the protec tor screw (usin g a screwdriver) , shown in figure 4.

When adjus ting the bill thic kness adjusto r screw does not solv e the problem of impr oper bill
feeding , you may need furthe r help by.authori zed service cen ter.

Hand-ho ld a note. Put it inside th e counting roll er and resistant ru bber. (see the pictu re).
To test the tensi le force. Clock wise directio n is tighten, coun ter-clock wise directio n is loosing.

<Figure 1> <Figure 2> <Figure 3> <Figure 4>

10.Cou nting roller r eplacement

New roll er Old roller

When the co unting rol ler damage d, it will cau se countin g not fluentl y or
correc t. Open the top c over, loosin g the screw of ro ller axis ma chine.
Replac ed old rolle r. Then fix the mac hine insi de.

11.Maint enance

-Do not ope rate the uni t in areas with hi gh temper ature or high h umidity
since it ma y damage the ma chine.

-When no t using the uni t for a long perio d of time, rem ove the power p lug
from the wa ll outlet.

-Never o perate the un it under str ong light.

-Clean t he machine fr equentl y after switc hing off and u npluggin g of the
machin e.

-Do not use t his produc t in areas wher e it may be expos ed to water or
other liq uids.

-Unplu g this produ ct from the wal l outlet bef ore cleani ng. Do not use
liquid cl eaners or ae rosol clea ner. Use a brush o r a damp cloth for
cleani ng.

Tensile force tes t.

13.Spe cial functio n

1.Wit h charg eable b atter y (Opti onal)

8

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully uA t o m a t i c

oney

ounter

m c

Suitable for bo th new,old,dirt y,tattered poly mer bills and paper bill s

Fully A u t o m a t ic

oney

ounter

m c

Fully

uA t o m a t i c

oney

ounter

m c