• Total Speaker Size (L x W x H): 11.7’’ x 5.0’’ x 5.6’’ -inches
www.PyleUSA.com
3
Page 4
PRODUCT DESCRIPTION
1234
1. Power ON/OFF
2. Play/Pause
3. MODE (Wireless BT Switch,
USB disk, FM and AUX-IN state)
4. Backward/Volume down
5. Forward/Volume Up
6. USB port
7. Micro SD slot
8. Type C Charging port
9. AUX IN
5 6 7 8 9
WIRELESS BT STREAMING:
1. Turn the power button to "ON". You will hear a "Bluetooth Device Ready To Pair"
tone, and the LED light will blink quickly. The speaker is now in pairing mode.
2. Activate Wireless BT on your mobile phone and search for the device named
"PYLEUSA", then connect to it. Once paired successfully, the Blue LED will blink
slowly, and you will hear a tone saying "Bluetooth Device Connected
Successfully".
3. Play music from your mobile phone and enjoy.
4. Use the Forward or Backward button on the device or on your mobile phone to
select songs you like.
5. Use the Play/Pause button on the device or on your mobile phone to play/pause
the music.
6. Press and hold the Forward or Backward button to adjust the volume up and
down or adjust the volume on your mobile phone.
www.PyleUSA.com
4
Page 5
PLAYING MUSIC FROM USB DISK & MICRO SD CARD:
1. Turn the Power button to "ON".
2. Insert a Micro SD card or USB ash disk into the slot. The speaker will make a
tone indicating "Music Play Mode", and play the stored music automatically.
3. While in playing mode, short press the Forward or Backward button to select
songs you like. Press and hold to adjust the volume up and down.
4. Press Play/Pause to play or pause.
Remark:
Under Wireless BT playing mode, inserting a Micro SD or USB will disconnect the
Bluetooth and switch to play the USB or Micro SD card. You can press the MODE
button to switch to Wireless BT mode again.
FM RADIO:
1. In FM radio state, the provided audio cable is the antenna.
Please insert the audio cable to get the best FM signal before use.
2. Turn the power button to "ON", then press the "MODE" button.
The speaker will prompt "The Radio Mode" when entering FM state.
3. While in playing mode, short press the "Play/Pause" button to auto-search the
FM Channel and store it automatically.
4. Use the Forward or Backward button to change the stored FM channel.
www.PyleUSA.com
5
Page 6
TWS FUNCTION:
1. Turn ON two identical speakers you want to pair. Please note that they must
have the same BT pairing name, both under BT mode. You only need to set up
one of the two units.
2. Press and hold the "PLAY/PAUSE" button for around 4 seconds. The speaker will
make a tone "di" to start pairing and will repeat the "di" voice three times once
successfully paired.
3. Connect Wireless BT with your mobile phone to play music through the two
paired speakers to create a more powerful surround sound eect.
4. If you want to exit the TWS mode, press and hold the "TWS" button (of the unit
that you set at the beginning) again to exit the TWS function.
Remark:
You can connect the TWS function through either Wireless BT or AUX, but if you
connect your mobile phone via the provided audio cable, you cannot switch to
Wireless BT mode by pressing the Mode button.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied
audio line cable to connect from the device’s "Line Out" to the "Aux In" of this
device. You will hear an "Aux input mode" tone once the cord is inserted.
When using an external device, all functions can be controlled by the external
device except pause.
www.PyleUSA.com
6
Page 7
Remarks:
1. To turn the unit ON, press and hold the Power button for 3 seconds.
2. Press the MODE button to switch between dierent modes.
The order is Wireless BT, USB disk, Micro SD, FM radio, and AUX-IN.
3. The default volume is set at 50% of the maximum volume.
4. Turn the power button to “OFF” if not in use.
HOW TO CHARGE:
1. The charger is not included in the accessories. Please use a Universal 5V/1A
charger to charge this device. We are not responsible for any damage caused
by using another charger.
2. Power o the unit, then insert the provided Type C charging cable into the
charging slot of the unit. Connect the other end to your PC or another charger
with a 5V output.
3. Charging time should be between 3 to 5 hours. The indicator light will be red
while charging and will switch o when fully charged.
Note: When playing music during charging, please set the volume to the middle.
For some music with heavy bass, the charger may not be able to handle the
high current temporarily under maximum volume.
4. To prolong the life of the battery, please do not charge for more than 8 hours.
Start Here
Register Product
Thank you for choosing PyleUSA. By registering your product,
you ensure that you receive the full benets of our exclusive
warranty and personalized customer support.
Complete the form to access expert support and to keep your
PyleUSA purchase in perfect condition.
www.PyleUSA.com
Model Number:
PBMSPG1BK
PyleUSA.com/pages/register
7
Page 8
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.