Pyle PPG460A User Manual
R
Owner's Manual
www.pyleaudio.com
PPG460A
R
Guitar Amplifier
www.pyleaudio.com
4
1
Troubleshooting
Distorted Sound:
1 3
2
5
4
6789
10
11
1) Power Switch: Switches amplifier on/off.
2) Power LED: Illuminates when power is switched on.
3) Input Jack: Connect your instrument to this jack.
4) Master: Adjusts overall volume.
5) Volume: This sets the volume gain level.
6) Bass: This control adjusts the low frequency level.
7) Mid: This control adjusts the middle frequency level.
8) Treble: This control adjusts the high frequency level.
9) Bass Expander: Toggles an extra bass effect.
10) Output Jack: Lets you output a line level signal
(non-amplified). Internal speaker is not disabled.
11) Phones: This is your headphone connection. Inserting
the headphones disables the internal speaker
(great for practicing).
Check if the amplifier is overdriven. If it is, you will
have to turn the level down.
Check signal source.
Try disabling Bass Expander.
Signal sounds discolored:
Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.
No Sound:
Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Intermittent Output:
Check connections.
Try a different cable.
2
1) Voltage Selector: AC 110/220 Volt Selectable Switch.
2) Power Cord: Connect cord to an AC outlet.
2
1
Model Driver
PPG460A
Specifications
Peak Dimensions
RMS
8" High
Definition
Speaker
30 W 150W
W=13"
H=16"
D=9 3/4"
3
Weight
18.3 lbs
Loading...