Page 1
PLVW1048VGA
10.4” FLIP-DOWN IN-CAR DISPLAY
(+VGA)
USER MANUAL
V1.0
Page 2
INDEX
NO CONTENT PAGE
1 Specification
2 Installation
3 OSD function
4 Content of OSD function
5 Accessories
6 Outside dimension
7 Precaution
8 Remark
Page 3
1. Specification
CAR-TV 10.4” + VGA function
Resolution 800(H) x 600(V)
Size 10.4” TFT LCD
Brightness
Video input
Audio input
PC input
200 cd/㎡ (Typ)
Composite Video(RCA)(F) ×2
(NTSC,PAL,SECAM)
Stereo Sound Input (RCA)(F) ×2
PC Sound Input (Phone Jack) ×1
Analog 0.7Vp-p/75ohms, Sync
Separate, TTL level.
Horizontal 30k ~ 70k(Hz),
Frequency Range
Vertical 50 ~ 75(Hz)
Support VESA
Power input DC 12~35V,3A(Max)
DDC2B, EDID v1 r1, DPMS
Not support
mono signal
IR Transmitter 2.3MHz&2.8MHz
Audio output
Control function
Adjustment
Power consumption 16W(MAX)
Temperature
FM Stereo Sound Wireless
Transmitter(88.0MHz~88.9MHz)
Display Key (6 Key)Control
Remote Key Control
PC Vidoe
Mute
PIP
AutoTune FM
Brightness
Contrast
Color
Quality
Position
Working: 5~39℃, Storage: 5~48℃
Brightness
Mute
FM
PIC MODE
Contrast
Saturation
Hue
*Option
Weight 2.2kg ±200g
Page 4
2. Installation
Step 1:
Attention: It’s directional for the iron slice.
Instruction to fix the screw of the iron slice
Page 5
Instruction to fix the screw of the monitor
Screw hole 4 mm
Page 6
Step 2:
Install the monitor on the roof.
Car roof
Iron slice
Car roof
Mounting plate
Page 7
Step 3:
Fix the monitor on the iron slice with the screws.
See step 1
Completed
Page 8
3. OSD function
VIDEO control keys：
1. Power： When you push this button, it will Power ON or OFF the
LCD.
2. ” — “：When you push this button, it will decrease the degree of
1 2 3 4 5 6 dome lights ON/OFF
the function that you selected.
3. ” ┼ “：When you push this button, it will decrease the degree of
the function that you selected.
4. MENU/SELECT：Show function menu list and select the function
on the menu, when you push this key.
5. V1/V2：Select Video 1 or Video 2 input.
6. PC: Select PC input.
Page 9
PC/VIDEO remote control function：
1
2
6
4
3
5
1. POWER：When you push this button, it will Power On or
Off the LCD.
2. V1/V2: You could select V1 or V2 or PC with this button.
3. MENU：Show Function Menu List and Select the function on
the menu, when you push this key.
4. UP：When you push this button, it will increase the degree of
the function that you selected.
5. DOWN：When you push this button, it will decrease the
degree of the function that you selected.
6. Mute: You could mute the audio with this button.
Page 10
4. Content of OSD Function
OSD Adjustment for PC function
Press “MENU” Button，display will show following picture.
PIP Enable
Auto Tune
Brightness
Contrast
Color
Quality
Position
Mute
FM
Default
Save Exit
H:37.6KHz V:59.7Hz
BIOS VERSION
800X600
Display Bios Version
PC Display Mode
PC Input Frequency
Continue to press “UP” & “DOWN“ buttons and select above
functions. Then, use “Menu” button to enter these functions
and adjust them to your personal preference.
PIP ENABLE : Set position ; see 4.1
AUTO TUNE : See 4.2
BRIGHTNESS : See 4.3
CONTRAST : See 4.4
COLOR : See 4.5
QUALITY : See 4.6
POSITION : See 4.7
MUTE : See 4.8
FM : See 4.9
DEFAULT : Set default value .See 4.10
SAVE EXIT : Save all of adjustment & exit to OSD function.
Page 11
4.1 PIP CHANNEL SELECT( Under PC Mode )
VIDEO 1
VIDEO 2
PIP OFF
RETURN
VIDEO 1: Set VIDEO 1 Input （Press “MENU” to enter）
VIDEO 2: Set VIDEO 2 Input （Press “MENU” to enter.）
PIP OFF : exit PIP function.
RETURN: Back to new setting.
4.2 AUTOTUNE( Under PC Mode )：
AUTOTUNE
D O I N G
AUTOTUNE : Auto tracking , positioning, phase and size (press
“MENU” to enter this adjustment.
It takes 5 second to finish this adjustment.)
4.3 BRIHTNESS
0 63
BRIGHTNESS
BRIGHTNESS: Adjust LCD brightness level 0~63 of the image
Page 12
4.4 CONTRAST
0 63
CONTRAST
CONTRAST: Adjust white color level 0~63 of the image.
4.5 COLOR
9300
7500
6550
USER
RETURN
9300K : Set color to 9300K（Use “MENU” to enter）
7500K : Set color to 7500K（Use “MENU” to enter）
6550K : Set color to 6550K（Use “MENU” to enter）
USER : Set color by user（Use “MENU” to enter）；
EXIT : Back to new setting
Page 13
4.6 QUALITY
SIZE
PHASE
TEST/GFX
SHARPNESS
RETURN
SIZE : Adjust size of the image.
PHASE : Adjust phase level 0~63 of the image.
TEXT/ GFX: DOS MODE/ change Text 720x400 & Gfx 640x400.
SHARPNESS : Adjust Sharpness level 0~15 of the image.
RETURN: Back to new setting
4.7 POSITION
IMAGE POS
OSD POS
SPEED EN
SPEED ADJ
RETURN
H:37.6KHz V:59.7Hz
IMAGE POS : Adjust UP/ DOWN/ HOR/VER position of the
image.
OSD POS : Adjust OSD UP/ DOWN/ HOR/VER position of the
image.
SPEED EN : Select open or exit OSD speed.
SPEED ADJ : Adjust OSD speed.
RETURN : Back to new setting.
Page 14
4.8 MUTE
MuteOff
MuteOn
H:37.6KHz V:59.7Hz
Mute Off : Choose this to close the mute function.
Mute On : Choose this to open the mute function
4.9 FM
FM88.0MHZ
FM88.1MHZ
FM88.2MHZ
FM88.3MHZ
FM88.4MHZ
FM88.5MHZ
FM88.6MHZ
FM88.7MHZ
FM88.8MHZ
FM88.9MHZ
Return
BIOS VERSION
800X600
H:37.6KHz V:59.7Hz
The signal carrier frequency of the sound outputs the function: Can use
Page 15
Channel in frequency modulation FM88MHz that the radio is adjusted
Receive the sound to export.
Adjusting range: 88.0MHz~88.9MHz
RETURN : Back to new setting
4.10 DEFAULT
YES NO
DEFAULT
5 OSD Adjustment for VIDEO function
Press “MENU” Button，display will show following picture.
Brightness
Mute
FM
PIC Mode
Contrast
Saturation
Hue
Default
Save Exit
BIOS VERSION
Display Bios Version
H:15.7KHz V:59.7Hz
BRIGHTNESS : See 5.1
Mute : See 5.2
FM : See 5.3
TV NTSC
Video System
Video Input Frequency
Page 16
PIC MODE : See 5.4
CONTRAST : See 5.5
SATURATION : See 5.6
HUE : See 5.7
DEFAULT : Set default value. See 5.8
SAVE EXIT : Save all of adjustment & exit to OSD function.
5.1 BRIHTNESS
0 63
BRIGHTNESS
BRIGHTNESS: Adjust LCD brightness level 0~63 of the image
5.2 MUTE
MuteOff
MuteOn
H:37.6KHz V:59.7Hz
Mute Off : Choose this to close the mute function.
Mute On : Choose this to open the mute function
Page 17
5.3 FM
FM88.0MHZ
FM88.1MHZ
FM88.2MHZ
FM88.3MHZ
FM88.4MHZ
FM88.5MHZ
FM88.6MHZ
FM88.7MHZ
FM88.8MHZ
FM88.9MHZ
Return
H:37.6KHz V:59.7Hz
BIOS VERSION
800X600
The signal carrier frequency of the sound outputs the function: Can use
Channel in frequency modulation FM88MHz that the radio is adjusted
Receive the sound to export.
Adjusting range: 88.0MHz~88.9MHz
RETURN : Back to new setting
5.4 PIC MODE
MODE 1
MODE 1
MODE 2
MODE 0: GAMMA TABLE 0
MODE 1: GAMMA TABLE 1
MODE 2: GAMMA TABLE 2
Page 18
5.5 CONTRAST
0 63
CONTRAST
CONTRAST: Adjust white color level 0~63 of the image.
5.6 SATURATION.
-128 +127
SATURATION
SATURATION: Adjust color Saturation level ~128~127.
5.7 HUE
-128 +127
HUE
HUE: Adjust color Hue level –128~127
5.8 DEFAULT
YES NO
DEFAULT
Page 19
5. Description of Accessories
1.
2
Accessory Description
Video, audio, power input
See chart 1
Power cable+ Fuse(spec:3A/250V)
Yellow：video input 1, video input 2
Red：audio input (R)1, audio
input(R)2
White：audio input(L)1, audio
input(L)2
Power input connector:
Red: Anode
Black: Ground
See chart 2
3
IR transmitter:
Receive 2.3MHz & 2.8MHz
(wireless headphone not included)
Page 20
Sound cable:
4
5
PC audio output connect to audio
input of monitor
PC audio input
6
7
RGB cable:
connect PC to video input of
monitor
PC video input
Page 21
Description of accessories:
Chart 1:
Page 22
Chart 2:
Page 23
6. Outside dimension
L:306.65mm
W:304.40mm
H:42.50mm
Page 24
Page 25
7. Precaution
1. It does not support mono signal.
2. When there’s no input signal of PIP function,
the feedback of OSD key may become slow.
You could just turn off the PIP window.
3.
Do not apply Pressure to the screen
4. Do not sprinkle any liquid to clean LCD. If you
need to clean it, please use LCD Clean cloth.
5. Please do not add any parts or use any accessory
which is not provided from the manufacturer.
6. Please do not use and store in the high Temperature.
(Storage 5~48℃, Operating 5~39℃)
7. When you connect cable, please make sure Anode
(Positive) and Cathode (Negative) is correct. If
incorrect, it might damage your LCD.
8. Please be careful when moving the monitor, in
case to damage the LCD.
Page 26
8. Remark
1:M4×0.7 L= 5 mm screw×6
ψ4 L= 10 mm screw×8
2:
Loading...