Pyle PLUTV43BTA User guide

Page 1
PLUTV43BTA
4’’ Waterproof Rated Off-Road
Wireless BT Streaming Speakers
Amplified Vehicle Speaker System
for ATV, UTV, 4x4, Jeep (800 Watt)
Page 2
PLUTV43BTA Installation
2. Speaker Mounting suggestion as below:
Rubber Pad
Step 1: Unbolting the mounting bracket Step 2: Slide in the buckle with rubber pad attached to the bracket stand of the speaker
Attach the set to handle bar of vehicle / ship
Step 3/4: Attach screw to lock the buckle Step 5: Using accessories of Butt Connector to Connect Speaker wires (See Illustration 1) Step 6 : Using accessories of Butt Connector to Connect Power Cable (See Illustrations 2)
1
www.PyleUSA.com
yellow
Blue
-
+
yellow
-
Blue
black
AUX
+
IN
Red
2
yellow
-
+
Blue
-
+
Blue
yellow
-
+
2
AUX IN
+
Power
BlackRed
-
Page 3
PLUTV43BTA
4’’ Waterproof Rated O-Road Wireless BT Streaming Speakers
Amplied Vehicle Speaker System for ATV, UTV, 4x4, Jeep (800 Watt)
Features:
Pro Audio PowerSport Speakers
Amplied (Active + Passive) Speaker System
Bluetooth Wireless Music Streaming Abiltiy
Bridged Sound System: (2) x 4.0'' Woofers + (2) x 0.5'' Tweeters
Marine Grade Waterproof Rated Construction
Weatherproof & Water-Resistant Housing
2-Way Full Range Stereo Sound Reproduction
Built-in Digital Sound Processing Amplier
Integrated Speaker Power & Wiring Harness
Compact Size & High-Powered Output
Impressive Bass Response
Aux (3.5mm) Input Jack
Connect & Stream Audio from External Devices
Sleek Design, Machine Molded Speaker Cabinet Housing
Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Bluetooth Connectivity:
Simple & Hassle-Free Pairing
Instant Wireless Audio Streaming Ability
Works with All of Today’s Latest Devices
Smartphones, Tablets, Laptops, etc.
Bluetooth Version: V4.2
Bluetooth Network Name: ‘PYLEUSA’
Wireless Range: 30+ ft.
* Bluetooth Receiver Module Built-Into Amplier
of Main / Active Speaker
Technical Specs:
Speaker Power: 800 Watt MAX
Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
Amp Type: 2-Channel, Class D
Marine Grade Waterproof Rating: IP-X5
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Frequency Response: 85Hz-20kHz
Impedance: 4 Ohm
Magnet Type: 20 oz. Circuit
Mid-Woofer Voice Coil Type: 1.0'', Aluminum
Sensitivity: 90 dB +/- 2 dB @ 1M/1W
Anti-Thump Turn-On
Soft Turn On/O
T.H.D: <0.05%
What’s in the Box:
(1) 4'' Amplied Main Speaker
(1) 4'' Passive Support Speaker
Speaker Connection Wires, 6.5' ft.
Wire Butt Connectors, 16-22 AWG
EVA Mounting Pads
S/N Ratio: >95dB
Channel Separation: >65dB
Amp Freq. Response: 10Hz- 30kHz
Fuse: 1 x 10A
Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.25’’ ~ 2.0’’ -inches
Speaker Dimensions (L x W x H): 5.62’’ x 8.38’’ x 7.29’’ -inches, with Bracket (Each)
Power Supply: DC 12V
Sold as: Kit
3
www.PyleUSA.com
Page 4
Loading...