Pyle PLTVD7P Owner's Manual

Download

Page 1

OWNER’S MANUAL

Mobile Video System

• Digital Audio Out-Coaxial

• DVD Player With TV Tuner

• Multi Color TFT Monitor

• Multi-subtitle Languages Function

• Multi-audio Languages Function

• Multi-angle Function

• Parental Control

• Remote Control

PLTVD7P

Page 2

FEATURES

Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD)

This player can play discs recorded in either PAL or NTSC format.

• A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders.

• L/R stereo analog audio outputs for connection to existing head unit aux inputs. Video output is composite video.

• Supplied remote handles multi-function

software (multi-language audiotrack/subtitle, multi-angle, multistory, etc.), plus all basic functions.

Built In TV Tuner

• PLL Tuning System

•I

C Bus Control

USE THIS PRODUCT SAFELY

When Driving

Keep the volume level low enough to be aware of road and traffic conditions.

When Car Washing

Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage.

When Parked

Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC, negative ground battery system (the regular system in a North American car).

Protect the Disc Mechanism

Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit.

Use Authorized Service Centres

Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance.

For Installation

The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.

Page 3

Safety Information ........................................................................................4

Disc Notes .....................................................................................................5

The Player......................................................................................................6

Installation .....................................................................................................8

Open/Close the Monitor and Angle Adjustment........................................9

Electric Connection ....................................................................................10

Remote Control...........................................................................................11

Preparing the Remote Control..............................................................................13

Loading a DVD/VCD/CD Disc...............................................................................13

Ejecting a Disc ......................................................................................................13

Basic Operation ..........................................................................................14

On-Screen Display Function.................................................................................16

Multi-audio Language Function............................................................................17

Menu Function......................................................................................................17

Title Menu Function ..............................................................................................17

Multi-subtitle Language Function .........................................................................17

Multi-angle Function .............................................................................................17

MP3 Disc Play.......................................................................................................18

TV Operation.........................................................................................................18

Setup ............................................................................................................19

Initial Setup ...........................................................................................................19

General Setup.......................................................................................................19

Speaker Setup ......................................................................................................21

Audio Setup ..........................................................................................................21

Preferences Setup ................................................................................................22

Defaults Table .......................................................................................................24

Specifications..............................................................................................25

CONTENTS

Page 4

CAUTION:

MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

• THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Region Management Information

Region Management Information: This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player cannot play this disc.

SAFETY INFORMATION

Page 5

DISC NOTES

Disc formats supported by this player

DVD

12 cm disc (Single-sided disc only)

VIDEO CD

12 cm disc

MP3

12 cm disc

Discs which cannot be played with this player

• DVD-ROM

• DVD-R/DVD-RAM

• CDV

• CD-G

Handling and Cleaning

• Dirt, dust, scratches and warping disc will cause misoperation.

• Do not place stickers or make scratches on discs.

• Do not warp discs.

• A disc should always be kept in its

case when not in use to prevent from damaging.

• Do not place discs in the following places:

1. Direct sunlight

2. Dirty, dusty and damp areas

3. Near car heaters

4. On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note:

A disc may become somewhat scratched (although not enough to make it

unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.

Preparing New Discs with Rough Spots

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.

Rough spots on inside edge

Ball point pen or pencil

Rough spots on outside edge

Label side up

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Page 6

THE PLAYER

1. Power ( ) 2 IR (Remote Sensor)

3. EJECT ( )

4. Disc Slot

5. PLAY/PAUSE

6. STOP (

)

7. PREV (

)

8. NEXT (

)

9. VIDEO INPUT

10. AUDIO INPUT

11. MODE

12. Indicator Light for DVD

13. Indicator Light for TV

14. Indicator Light for AV

15. SPEAKER ON/VOLUME

16. MULTI COLOR TFT MONITOR

17. COLOR Adjustment knob

18. BRIGHTNESS Adjustment knob

19. CONTRAST Adjustment knob

FRONT VIEW

5-INCH MULTI COLOR TFT MONITOR

15 2

7-INCH MULTI COLOR TFT MONITOR

Page 7

THE PLAYER

20.

This jack is for earphone. You can connect an earphone to the jack to receive sound signal.

21. VOLUME

Slide the knob to change the volume of the earphone.

22. Antenna

This antenna can receive TV signal.

BACK VIEW

23. DC 12V Power Input Socket

24. DC 12V Power Output Socket

25. Remote Control Socket

26. Digital Audio Out - Coaxial

27. AUDIO/VIDEO OUTPUT

28. Diversity Antenna Input

29. OPEN Button (Press to eject the screen display from the base at a little angle)

SIDE VIEW

25 26

Page 8

INSTALLATION

1. Remove the two transport screws Press OPEN button on the back of the unit to eject the screen display from the base at a little angle then turn the monitor upward to display the two screw. And then use the screwdriver to remove the two screws.

2. Push the monitor back into the monitor base unit until the screen engages with OPEN button. Then attach the brackets on both sides of unit with screws (M4x5), last install the unit with screws (M5x25). When fix the unit, you can slide the screw (M5x25) to left side or right side to meet your needed position. In the figure below, select two holes among the positions that marked 1, 2, 3 and 4 to fix the bracket.

Remove the transport scerws

Open Button

SCREW M5 x 25

SCREW

M4 x 5

SCREW

M4 x 5

Page 9

OPEN/CLOSE THE MONITOR AND ANGLE ADJUSTMENT

Opening the monitor

Press the OPEN button on the back of the unit to eject the screen display from the base at a little angle. Then you can easily turn the monitor upward.

Adjusting the angle of the monitor

Rotate the monitor counter-clockwise to let the front view of the monitor appear. Then you can also adjust the monitor left and right from the central viewing position at a certain angle range. Don’t rotate the monitor forcibly to avoid mechanical damage.

Note: When the monitor is in upright position to the base, you can adjust the monitor left or right. Otherwise, the monitor may scrape the base surface when rotated.

Closing the Monitor

Rotate the monitor left and let the back of the monitor upward, then return the monitor to the central viewing position. Then push the monitor back into the monitor base unit until the screen engages with OPEN button.

OPEN BUTTON

Page 10

ELECTRIC CONNECTION

AC/DC

ADAPTOR

(OPTIONAL)

YELLOW

VIDEO OUT

RED

AUDIO R OUT

WHITE

AUDIO L OUT

DIVERSITY ANTENNA INPUT

CIGARETTE LIGHTER

REMOTE CONTROL RECEIVER

(OPTIONAL)

DC 12V

INPUT

OUTPUT

REMOTE

AUDIO/VIDEO

OUTPUT

DIVERSITY ANTENNA

INPUT

DIGITAL AUDIO

Page 11

REMOTE CONTROL

2421

2726

3130

Page 12

REMOTE CONTROL

1. POWER Press POWER to turn the unit ON or OFF.

2. EJECT Press to eject the disc.

3. MUTE Press to mute the sound.

4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language

DVD disc.

5. ANGLE Changing of the view angle on multi-angle DVD disc.

6. DISPLAY Display statistical disc information during playback.

7. MODE Changing between DVD mode, TV mode and AV mode.

8. SETUP Display the SETUP menu.

9. PAL/NTSC Switch between PAL mode and NTSC mode.

10. AUDIO Changing of the AUDIO soundtrack on multi-audio soundtrack

DVD disc. Changing of the sound mode of the VCD/CD disc.

11. TITLE Display the TITLE menu that is stored in DVD disc.

12. MENU Display the root menu that is stored on the DVD disc.

In TV mode, press it to enter into search state, then pressing button to start searching TV channels.

13.

/ , / In case of MENU mode, / , / , buttons served as cursor

buttons to select item left/right, ahead/back..

14. ENTER Confirm the Track/Chapter selected with the numeric buttons or

selected with the cursor buttons on TV screen.

15.

/ Changing for slow forward/reverse playback motion.

16.

Press to play the disc.

17. / Press to start forward rapidly & to reverse rapidly.

18.

(CH+)

(CH-)

Press to skip to the next track & press to skip back one track. In TV mode, press

(CH+) button or (CH-) button to

choose channel upward or downward.

19.

Press it to stop playback.

20.

Press it to pause playback..

21. 0 - 9 Numeric buttons

22. 10+ (-/--) Digital selecting button, cooperatively used with numeric buttons.

23. CLEAR When you input a number in error, press the button to clear it.

24. VOLUME+/- Press VOLUME+/- button to increase or decrease the volume

level.

25. ZOOM Allows the picture to be increased or decreased in size.

26. RESUME When in stop mode, press the button, the play can be resumed

from the stop point.

27. GOTO Disc search button, cooperatively used with numeric buttons.

28. PBC Changing between PBC ON and PBC OFF on the VCD disc.

29. RANDOM Allows the track played in random order.

30. PROGRAM Allows the track played in the order you programmed.

31. REPEAT Switch the Repeat mode of discs.

32. A-B A-B repeat allows a passage to be repeated continuously.

Page 13

REMOTE CONTROL

Preparing the Remote Control

Inserting the Batteries

1. Open the battery compartment cover.

2. Insert the new batteries. Make sure

that the positive and negative terminals of the batteries are oriented indicated.

3. Close the cover

Battery: Two AAA size battery.

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About ± 30 degree in each the direction of the front of the IR mark.

To prevent damage to the unit, be sure to follow the connection diagram (page 11).

Loading a DVD/VCD/CD Disc

1. Turn the ignition on the accessory position.

2. Press the POWER button (1).

3. Insert the disc with printed side facing up into the disc slot (2).

4. The player starts playback automatically.

Ejecting a Disc

Press (EJECT) button (3) to eject the disc.

1 2 3

Page 14

BASIC OPERATION

Stopping Play

- Brief press the

(Stop) button to stop the unit playback, when press the (Play) button it can continuous normal playback.

- Press

(Stop) button twice, it will stop the playback and go back to initial Track/Chapter.

Rapid Forward/Rapid Reverse

Press

& during play. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follow.

DVD:

VCD/CD:

MP3:

Skipping Track

Press

/ on the remote handset or

/ buttons on the front panel during playback. Press

to skip to next track, and to back one track. Note: For some VCD2.0 discs (PBCplayback control),

/ buttons may

be unavailable.

Slow Motion Play

Press

/ during play. Each time the button is pressed, the speed of slow forward/reverse changes according to the disc as follow. DVD:

Pause (still picture)

Pressing

on the remote control or on the front panel during playback will stop play temporary. Return to normal

Normal Playback 2X 4X 6X 8X

playback, press on the remote control or

on the front panel.

MUTE

Will mute the sound, but the disc continues playing. When you unmute the sound (press MUTE again), a later passage will be playing.

Repeat

FOR DVD: Press the REPEAT button to select repeat mode as follow.

FOR VCD/CD: Press the REPEAT button to select repeat mode as follow.

1. Continuously repeat at the current chapter/track, when selected REPONE mode.

2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc.

3. When the player finish playback the current disc last chapter/track, it will stop display the elapsed time. When selected REPEAT OFF mode, REPONE & REP-ALL disappear at the screen display.

4. REPEAT feature not support VCD2.0 (with PBC ON).

A-B

A-B repeat allows a passage to be repeated continuously. Press A-B button at the start of the required passage, then press A-B button again at the end of the passage. To revert to normal playing, press A-B button again. Each time the button pressed, the screen will display as follows:

A TO B SET A ➝ A TO B SET B ➝ A TO B CANCELLED

CHAPTER REPEAT ON TITLE REPEAT ON

REPEAT OFF

REP-ONE REP-ALL REPEAT OFF

Normal Playback 2X 4X

Normal Playback 2X 4X 8X

Normal Playback 1X 2X 3X 4X

Page 15

When select one mode, the corresponding indicator will be illuminated.

SPEAKER ON/VOLUME CONTROL KNOB

Rotate the SPEAKER ON/VOLUME knob clockwise or counter-clockwise to increase or decrease the volume level of the speakers on the base of the unit. When rotate the knob in the direction of volume decreasing to the end, it will turn off the speakers.

COLOR

Slide the COLOR knob upward or downward to increase or decrease the color of the screen display.

BRIGHTNESS

Slide the BRIGHTNESS knob upward or downward to increase or decrease the screen brightness.

CONTRAST

Slide the CONTRAST knob upward or downward to increase or decrease the contrast lever of the screen display.

OPEN (Monitor Release Button)

Press the OPEN button on the back of the unit to eject the screen display from the base at a little angle. Then you can easily turn the display upward or downward for good viewing.

Remote Sensor (IR)

Point the remote handset to the remote sensor on the front panel. Receive the signal from remote handset.

Turning the player on/off

Press the

(POWER) button on front of panel or on remote control to turn the player on or off.

Reset Function

When the function buttons are operated in error state, please unplug the DC 12V INPUT plug then put the plug in the socket again.

Disc Search (GOTO)

FOR DVD Press GOTO button twice, the screen will display the following message:

You can select the item you want to watch through TIME setting by using numeric buttons and ENTER key.

FOR CD/VCD (WITH PBC OFF): Press GOTO button once, the screen will display the following message:

Use numeric buttons to input the time directly.

ZOOM

Allows the picture to be increased or decreased in size. Press ENTER to toggle among 1.5 scale, 2.0 scale and

3.0 scale.

RANDOM

Press RANDOM button, track selection will be made in random order. The display screen will show “SHUFFLE ON” on the right-top corner. Press RANDOM button again, “SHUFFLE OFF” appears and release the mode.

PROGRAM

In stop mode, press PROGRAM button, the screen will display “PROGRAM P00:00”. For example: press numeric button 4 and

button, “PROGRAM P01:04” appears. It means track 4 will be played first.

MODE SELECTION

Press MODE button on the front panel of the unit or on the remote control to select among DVD, TV and AV mode.

TITLE 01/01 TIME -- : -- : --

00:00:25

GOTO -- : --

00:00:25

BASIC OPERATION

Page 16

BASIC OPERATION

(2) Press DISPLAY for the second time:

SINGLE REMAIN

00:03:15

(3) Press DISPLAY for the third time:

TOTAL ELAPSED

00:00:25

(4) Press DISPLAY for the fourth time:

TOTAL REMAIN

00:40:35

(5) Press DISPLAY for the fifth time: The message on the screen will be cleared.

CD:

(1)Press DISPLAY for the first time:

SINGLE ELASPED

00:00:25

TOTAL TRACK : 14 TRACK : - 01

(2)Press DISPLAY for the second time:

SINGLE REMAIN 00:03:15

TOTAL TRACK : 14 TRACK : - 01

(3)Press DISPLAY for the third time:

TOTAL ELASPED 00:00:25

TOTAL TRACK : 14 TRACK : - 01

On-Screen Display Function

Press the DISPLAY button during playback to display the contents of the current disc on the screen. Example:

DVD:

(1) Press DISPLAY for the first time:

TITLE 01/03 CHAPTER 002/025

00:02:25

Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time.

(2) Press DISPLAY for the second time:

TITLE REMAIN

01:46:58

(3) Press DISPLAY for the third time:

CHAPTER ELAPSED

00:00:24

(4) Press DISPLAY for the fourth time:

CHAPTER REMAIN

00:01:39

(5) Press DISPLAY for the fifth time: The message on the screen will be cleared.

VCD:

(1) Press DISPLAY for the first time:

SINGLE ELAPSED

00:00:25

Page 17

between monaural and stereo sound.

MONO LEFT MONO RIGHT STEREO

MENU Function (For DVD Only)

Press MENU button while the disc is playing and the disc menu will be displayed. You can navigate with the remote control navigation keys and select a feature with the ENTER key.

TITLE Menu Function (For DVD only)

If the DVD has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.

- Press TITLE during playback. The title menu is display.

- Press the cursor button shown in TV screen, select preferred title by the cursor button and confirmed by ENTER key.

Multi-subtitle Language Function (For DVD only)

Press SUBTITLE during playback. Each time the button is pressed, number of the subtitle language changes in sequential order. Notes:

- The language number is different according to the disc.

- Some discs only contain one subtitle language.

- When no different subtitle language are recorded,

will be displayed at

screen left top corner.

Multi-angle Function (For DVD only)

Press ANGLE during playback. Each time the button is pressed, number of the angle changes in sequential order. Notes:

- The angle number is different according to the disc.

- The function only works for discs having scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at screen left top

corner.

BASIC OPERATION

(4) Press DISPLAY for the fourth time:

TOTAL REMAIN 00:40:35

TOTAL TRACK : 14 TRACK : - 01

(5) Press DISPLAY for the fifth time: The message on the screen will be cleared.

MP3 (When set to NO MENU in SMART NAV item):

(1) Press DISPLAY for the first time:

CHAPTER ELASPED 00:00:25

TOTAL TRACK : 123 TRACK : - 01

(2) Press DISPLAY for the second time:

CHAPTER REMAIN 00:04:25

TOTAL TRACK : 123 TRACK : - 01

(3) Press DISPLAY for the third time: The message on the screen will be cleared.

Multi-audio Language Function

For DVD:

Press AUDIO during playback. Each time the button is pressed, number of the audio soundtrack language changes on sequential order. Notes:

- The language number is different according to the disc.

- Some disc only contain one language soundtrack.

- When no different language soundtrack are recorded

will be

displayed at screen left top corner.

For VCD/CD:

Press AUDIO during playback. It is possible to switch the sound

Page 18

MP3 Disc Play

MP3 disc is playing as the format of FOLDER. For example:

Use / , / to select the item or folder, then press ENTER button. Pressing REPEAT button repeatedly can select three kinds of repeat play mode. REP-ONE: Play the same song over and over again. FOLDER REPEAT: Play all songs in the current directory in sequence, over and over again. FOLDER: Play all songs in the current directory once. When select PLAY MODE, press

/ to

change between the following mode:

In the playback, use

or to skip an

item ahead or back.

: Rapid reverse, : Rapid advance Note: The FOLDER cannot be selected during playing. It can be selected after

(Stop) button pressed.

ROOT 0

MP3 MUSIC 1

SKY

MP3 HEAR YOUR

DISC

BASIC OPERATION

ROOT

SMART NAVI

PLAY MODE

TV Operation

Press the MODE button on the remote control to switch among DVD mode, TV mode an AV mode. When in TV mode, the function of the buttons served in DVD mode is locked.

Searching channels

Press MENU button will enter into searching mode. Then press

(CH+) button to start searching TV channels and press

(CH-) button to stop

searching.

Selecting channels

- Press

(CH+) button or (CH-) button to choose channel upward or downward.

- The numeric buttons (0, 1~9) allow you to select the corresponding channel directly.

Press digital select button 10+ (-/--) cooperatively used with numeric buttons to select channel desired.

Volume Adjustment

Press VOLUME+ or VOLUME- to adjust volume level.

SINGLE REP-ONE FOLDER FOLDER REP

DISC SCAN DISC DISC REP RANDOM

SHUFFLE ON PROGRAM PXXX

Page 19

SETUP

INITIAL SETUP

SETUP MENU --- MAIN PAGE

1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player under STOP mode.)

2. The initial SETUP menu is displayed.

3. Select the preferred item by using the / buttons.

4. Press ENTER buttons.

a. GENERAL SETUP

This setup page includes all the item of TV display & audio output feature. The detail please refer to GENERAL SETUP MENU.

b. SPEAKER SETUP

This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Please refer to SPEAKER SETUP MENU.

c. AUDIO SETUP

This setup page includes all the items for AUDIO. Please refer to AUDIO SETUP MENU.

d. PREFERENCE SETUP

This setup page includes all the configuration of support feature. The detail please refer to

PREFERENCES SETUP MENU.

GENERAL SETUP

--- GENERAL PAGE ---

TV display setup

This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in letterbox style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.)

Wide (For 16:9 TV)

Select when a wide-screen TV set is connected.

Video Material

Normal

TV Screen

Pan Scan Letter-box

4:3 Wide (16:9)

4:3

16:9

GENERAL SETUP

SPEAKER SETUP

AUDIO SETUP

PREFERENCES

EXIT SETUP

TV DISPLAY

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

NORMAL/PS

NORMAL/LB

WIDE

Page 20

SETUP

--- GENERAL PAGE ---

PIC mode setup

Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on image or picture under noise affect.

--- GENERAL PAGE ---

ANGLE MARK display setup

If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear.

--- GENERAL PAGE ---

OSD LANG type setup

Select the preferred OSD language by using the / buttons.

--- GENERAL PAGE ---

CAPTIONS setup

Activate the CAPTIONS feature by selecting ON. And release this feature by selecting OFF.

TV DISPLAY

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

AUTO

HI-RES

N-FLICKER

TV DISPLAY

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

ENGLISH

TV DISPLAY

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

OFF

TV DISPLAY

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

OFF

Page 21

SETUP

--- GENERAL PAGE ---

SCR SAVER setup

Select the SCR SAVER output ON/OFF.

SPEAKER SETUP

--- SPEAKER SETUP PAGE ---

This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons.

- Select the LT/RT to activate the Dolby

surround compatible output.

- Select the STEREO to activate simple

stereo mode.

AUDIO SETUP

--- AUDIO SETUP ---

AUDIO OUT

This is to activate the audio output from ANALOG mode to SPDIF/RAW mode to SPDIF/PCM mode.

--- AUDIO SETUP ---

OP MODE

There are two operating modes for the Dolby Digital decoder: LINE OUT and RF REMOD.

TV DISPLAY

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

OFF

AUDIO OUT

OP MODE

DYNAMIC

LPCM OUTPUT

MAIN PAGE

ANALOG

SPDIF/RAW

SPDIF/PCM

AUDIO OUT

OP MODE

DYNAMIC

LPCM OUTPUT

MAIN PAGE

LINE OUT

RF REMOD

DOWNMIX

MAIN PAGE

LT/RT

STEREO

Page 22

SETUP

PREFERENCES SETUP

--- PREFERENCES PAGE ---

TV type setup

This player can play discs recorded in either PAL or NTSC format. Select NTSC format, when you connected to NTSC TV. Select PAL format, when you connected to PAL TV. Select AUTO format, the player TV output format will according to the DVD disc format.

--- PREFERENCES PAGE ---

AUDIO language setup

Select the preferred AUDIO soundtrack by using the cursor buttons.

--- AUDIO SETUP ---

Dynamic Range Control

Select DRC and adjust the dynamic range of a Dobly Digital encoded program. There are 8 steps between full compression and off compression.

--- AUDIO SETUP ---

LPCM OUTPUT

Select the LPCM OUTPUT between LPCM 48K and LPCM 96K.

AUDIO OUT

OP MODE

DYNAMIC

LPCM OUTPUT

MAIN PAGE

FULL

6/8

4/8

2/8

OFF

AUDIO OUT

OP MODE

DYNAMIC

LPCM OUTPUT

MAIN PAGE

LPCM 48K

LPCM 96K

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

AUTO

NTSC

PAL

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

ENGLISH

FRENCH

SPANISH

CHINESE

JAPANESE

Page 23

SETUP

--- PREFERENCES PAGE ---

SUBTITLE language setup

Select the preferred SUBTITLE language by using the cursor buttons.

--- PREFERENCES PAGE ---

DISC MENU language setup

Select the preferred DISC MENU language by using the cursor buttons.

--- PREFERENCES PAGE ---

PARENTAL

Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.

--- PREFERENCES PAGE ---

PASSWORD

Select the change and press ENTER button. Type the old password (The initial factory code is 3308) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

ENGLISH

FRENCH

SPANISH

CHINESE

JAPANESE

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

1 G

3 PG

4 PG 13

6 PG-R

7 NC-17

8 ADULT

NO_PARENTAL

CHANGE

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

ENGLISH

FRENCH

SPANISH

CHINESE

JAPANESE

OFF

Page 24

SETUP

--- PREFERENCES PAGE ---

DEFAULTS

Select reset to become factory initial setting.

RESET

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

NO MENU

WITH MENU

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

DEFAULTS

SMART NAV

MAIN PAGE

DEFAULTS TABLE

General Setup TV Display Normal/LB

PIC Mode AUTO

Angle Mark ON

OSD Language English

Captions ON

SCR Saver ON

Speaker Setup Downmix Stereo

Audio Setup Audio Out SPDIF/RAW

OP Mode Line Out

Dynamic FULL

LPCM Output LPCM 96K

Preferences TV Type AUTO

Audio English

Subtitle English

DISC Menu English

Parental NO Parental

Password 3308

Smart NAV With Menu

--- PREFERENCES PAGE ---

SMART NAV

In this item, you can select NO MENU mode or WITH MENU mode.

Page 25

SPECIFICATIONS

Supply Voltage : 12V DC (11V-15V), test voltage 14.4V, negative ground Current Consumption : Less than 2A Signal System : Compositive video 1.0Vp-p 75Ω Discs Played : (1) DVD-VIDEO Disc

5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer

(2) Compact Disc (CD-DA)

5” (12cm) disc Audio Output Level : 600Ω (2 ch 2.0 Vrms) Audio Signal Output Characteristics : (1) Frequency Response 20 Hz - 20 KHz

: (2) S/N Ratio 80 dB (JIS)

: (3) Wow and Flutter Below measurable limits

Note:

Specifications and design are subject to modification, without notice, due to improvements in technology.

Page 26