Page 1
DVD Player
Operating Instructions
PLTVD158
PLTVD158
NOTES Any change to the design and specifications will not be advised.
Before attempting to connect,
or operating this product.
Please read the instructions completely
Page 2
Important Precautions
Table of content
The design and manufacture of this player takes personnel safety in to
consideration. However, any improper operation may result in electric shock,
fireandotherhazard.SoPleaseadheretofollowingprecautions.
Safetyprecautions
There is dangerousvoltage insidethis product, do not open the cabinet by
yourself to prevent electric shock. Any service please contact professional
technician to perform. Replacement shall apply the components
recommendedbythemanufacturer;
To prevent electricity leakage or damage, do not spill liquid,alcohol in the
product;
Do not drop anything intothe product from ventilation holeof the cabinet or
anyotheropening,topreventelectricityordamage;
Topowertheplayermustbeinlinewiththemarkintherearpanel;
Whentheplugoftheunitiscommented to the mains outlet, the unit will be still
connectedtoACevenof the power is turned off.
To prevent damage caused by lightening, when you arenot goingto usethis
product,pleaseshutoffthe power;
Youshould clean the cabinet withdry,soft clothonly after the power is turned
off.
Operatingprecautions
Place the product levelly where there is little dust and good ventilation
condition;
Prevent the product and its supplied remote control from moisture,
heating,vibrationordirectsunlight;
Condensationcausedbymoisturemayhappentothelensinsidetheproduct,
it will affect the play effect. In such caseplease turnon thepower (unload the
disc) to operate it for 1~ 2 hours, vaporize the condensation with the homegrownheat;
Do not turn on/off the product frequently. After you turning off the product,
please wait for about 10 seconds prior reopening it. Do not play the broken,
scratchedortwisteddiscs;
Pleasedonotputanythingotherthandiscsintothetray;
Whenthediscisimproperlyloaded,pleasedonot force.
1 _ ______________
DVD features
2 ______________
Names of parts
2.1 Frontal panel _________________
2.2 Rear panel __________________
2.3 Remote control ________________
3 ________
Preparation before operation
3.1 unpacking and check_______________
3.2 assembling batteries of remote control _______
3.3 connections ____________ ____
Basic operations
4 ____________ __
Play _____________________
Mute ______________________
Stop playing ___________________
Power _________________________
Band _________________________
5 ___________Radio(FM/AM) function
6 _____________
Frequent operations
Select content to be played with menu _______ _
Play fast forward _________________
Play fast backward ________________
Slow play _____________________
Skip to next chapter/track_____________ _
Skip to previous chapter/track ____________
Select track ___________________ _
Display track List ________________ _
Repeat play______________ ___
Select Subtitle language _____________ _
Display playing time and state____________
MP3 operations __________________
7 _______ ________System setting
Example 1:Set TV screen ratio mode________ __
Example 2:Set sound mix output mode _______ __
_
___
__
1
2
2
2
3
4
4
4
5
8
8
9
9
9
9
10
12
12
12
13
13
13
13
13
13
14
14
14
15
17
17
18
19
Page 3
Table of content
Example 3:Coaxial output ______________
Example 4:Set age control grade _______ _____
Example 5:Set operation indication or menu display language_
8 ____
Functions of buttons in remote control
9 ______________
Technical terms
10 ______________
Troubleshooting
11 _______ ________
Specification
20
20
22
26
26
27
1. DVD features
It provides this multi-media disc player high-resolution image with, high-
quality sound and surround soundeffect. The DVD player can play notonly
DVD discs of various versions, but also VCD, SUPER-VCD, DVCD,
CD,MP3,etc.
Features
1.ItiscompatibletoDVD,VCD,SUPER-VCD,DVCD,CD,MP3,etc.
2. Multi languageon screen menu.
3.Highqualityimagewithover500lineshorizontalpesolution.
4.
ItiscompatibletoFM,DVD,AM,TV,LINEIN.
Other features
1. Dts digital output, provides high-fidelity stereo interface.
2. Multi-language support. DVD supports up to 32-language caption
and8-languagedub.
3. Multi-angle. The user can select different angle at their option to
watch,e.g.closerangle,fullview,etc.
4. Multi-image ratio. multi-image ratio mode enables the product to
matchdifferent types of TV screen.
DVD features
1
Page 4
Names of parts Names of parts
2. Names of parts
2.3 Remote control
1. POWER
ON/OFF
2. DISK SLOT
3. OPEN/CLOSE
4. LCD DISPLAY
5. PAUSE/PLAY
6. PHONE
7. STOP
8. SPEAK
9. NEXT
10.PREV
11.BASS- / REW
12.BASS+ / FF
13.EAR
14.MUTE
15.VOL+ -
2.1 Front panel
14
1
10
15
2.2 Rear panel
11
12
5367
89
2 4
1314
1
2
15
16
3
17
4
5
6
7
8
18
19
20
21
22
23
24
9
10
11
12
13
14
25
26
27
28
30
29
Violet
12
WHITE---FRONT LEFTSPEAKER(+) OUTPUT
BROWN---FRONT RIGHTSPEAKER(+) OUTPUT
GREEN---REAR LEFTSPEAKER(+) OUTPUT
VIOLET---REAR RIGHTSPEAKER(+) OUTPUT
BLUE---POWER ANTENNA
Green
6
Violet/Black
BLACK---GROUND
11
5
Green/Black
7
8
9
10
11
12
2
Brown
White
10
4
Brown/Black
1
RED-------------+12VOLT BATTERY
2
ORANGE----------IGNITION SWITCHEDINPUT POWER
3
WHITE/BLACK-----FRONT LEFTSPEAKER(-) OUTPUT
4
BROWN/BLACK-----FRONT RIGHTSPEAKER(-) OUTPUT
5
GREEN/BLACK-----REAR LEFTSPEAKER(-) OUTPUT
6
VIOLET/BLACK----REAR RIGHTSPEAKER(-) OUTPUT
9
White/Black
Blue
8
3
Orange
1.PAUSE/PLAY
2.POWER
3.NUMBER
4.SUBTITLE
5.DISPLAY
6.AUDIO
7.ANGLE
8.SETUP/REG
9.ENTER/SELECT
10.BAND
11.SAVE
Black
2
7
1
Red
12.SCAN
13.LOUDNESS
14.SPEAK
15.STOP
16.LOC/EJECT
17.MENU/MANUAL
18.SLOW
19.TITLE
20.MUTE
21.REPEAT
22.ZOOM
23.NEXT
24.PREV
25.BASS- / FB
26.BASS+ / FF
27.TREB-
28.TREB+
29.VOL-
30.VOL+
3
Page 5
Preparation before operation
3. Preparation before operation
Names of parts
3.1 Unpacking and check
Check for the following Accessories:
Remote control
DVD Surround
DVD Surround
DVD Cage
Yellow, Red, and White RCA to RCA
DVD Player
Lead
Owner's manual
3.2 Assembling batteries of remote control
Open battery compartment , Insert one battery, make sure to
match "+" and "-" of the battery to the marks in the battery
compartment. While operating remote control, please point it to
thefrontal panel of the DVD player.
Be carefl: Please draw back the protection membraneof the
Batterybefore operating.
3.3Connections
The video signal is output through s-video or video output
terminal, while audio signal is output by mixing channel terminal,
coaxial terminal, dts signal is only output through or coaxial
terminal. There are many solutions to connect TV and this
product, user can select one according to the condition of the
apparatus to be connected. However, be aware to shut off all
powerprior connection.
DVD+TV
TV
LRVIDEOS-VIDEO
YELLOW
WHITE
RED
DVD+AMP
AMP
LRVIDEOS-VIDEO
YELLOW
WHITE
RED
4
5
Page 6
Preparation before operation Preparation before operation
When you turn off the car's
powersupply bykey (ACC),
the unit will be turn off and
can remember the latest
picture. When you turn on
the IGNITION SWITCH
again and play DVD, the
unit will play from the
memorypoint.
When you turn off the car's
powersupply bykey (ACC),
the unit can turn off
automatically.
Radioantpower out
It provides the powerof DC
9V/0.5A when powerof the
product is FM/AM state. If
you turn off power of the
product, it will have no
output.
DVD+AC+SPEAPERS
Blue
RADIO ANT POWER
Orange
IGNITION SWITCHED INPUT
GROUND
Black
Red
DVD WITH R TUNER + RADIO ANT (THIS CONNECTED
ONLY USE IN DVD WITH RADIO TUNER MODEL)
RADIO ANT
DVD WITH TV TUNER + TV ANT (THIS CONNECTED
ONLY USE IN DVD WITH TV TUNER MODEL)
TV ANT
DC+12VOLT BATTERY
Note:
It is recomended to connect
tocar battery.
RR
VIOLET/BLACK
RL
VIOLET
+
-
+
GREEN
-
GREEN/BLACK
WHITE/BLACK
-
+
WHITE
BROWN/BLACK
BROWN
-
+
6
FL
FR
7
Page 7
Basic operation
4. Basic operation
Ifyou have connected theproduct to TV,
all power lines have been plugged into
receptacles, and loaded the batteries
into remote control, so you can play the
player.
Turnon TV power
If you have connected amplifier, you
should also turn it on, and select proper
amplifier mode according to the type of
discsto be played.
While playing push [ ] to pause the
playback, push [ ] again to resume
play
Mute
(available to analog audio output
Signalonly)
Push [MUTE] to silence the sound of the
player,press it again to return to normal
state.
Basic operation
Play
1.Push [POWER] in theplayer.
Control TV remote control to shift TV
toproper video input mode (VIDEO IN).
2.
It is acquiesced to be in FM state,
Pleasepress [BAND] button to choose
DVD state,
Push open/close eject
player or [ EJECT] buttons on the
remotecontrol to the solt.
Load a disc in the solt, with label side
upward (see following figure), place
singledisc in the solt,
3.Push [ ] PLAY/PAUSE
The player will solt- in disc
automatically and begin to read it, It can
identify different disc format then
display it on the screen of DVD frontal
panel, afterwards if automatically plays
disc, If directory or menu picture disply
in the screen, you can push the
direction buttons [UP], [DOWN],[LEFT]
and [RIGHT] buttons in the remote
control to move lighting band to desired
track, You can directly push number
buttonsto select track.
Stopplaying EJECT
1.Push [EJECT]
unload the disc until the tray is
ejected. After stopping playing, unload
thedisc until the trayis ejected.
2.Push [EJECT] to closethe tray
3.Press [POWER] to turnoffthe player.
Then turn off power of all connected
equipment.
Power
The DVD player is considered in
standby state,Please press[power]
button to choose between standby and
nomalworking state.
Band
The DVD player are five working
states:FM/DVD/AM/TV/GAME.It is
acquiescedtobein FM state,Please
press [BAND] button to choose among
these five states. The order
following:FM--DVD--AM--TV--GAME-FM,Different working state has
different function.
Attention:
While playing if you find
the picture is not shown in full
screenor someparthidden or
black and white image
occur,youneed tothe system,
pleaseselect rightTV system
(PAL orNTSC), Please refer
to instructions of [SYSTEM]
IN CHAPTER 6 or examples
inchapter 6.
When the symbol
shows in TV screen, it
signifies invalid operation or
your operation is not
acceptedby theplayer.
8
9
Page 8
Radio(FM/AM) function
5. Radio(FM/AM) function
Radio(FM/AM) function
Relevant buttons instructions of radio state,FM and AM included.
LOC : Receive different signal intensitybroadcasting station,and
choose between local and distant.
SETUP/REG : the button is to choose between America and
Europe system conversion output. When customers use the machine in
different orientations,they can pressthe buttonto choose the local
system in order to receive the local broadcasting station.
SCAN: Press the key to search automatically the present waveband
of the radio station.It will cease searching when press any button,but
the broadcasting station searched would be stored in Memorizer.FM
and AM can be stored 30 broadcasting stations maximumly. When
finish searching,it will automatically play the firstly searched radio
station.
LEFT:searching broadcasting station circling downwards at current
waveband until receive or press any button to cease.
RIGHT: searching broadcasting station circling downwards at current
waveband until receive or press any button to cease.
UP: press the button searching radio station at current waveband
upward,once increase one wavelength,FM American system is
100KHZ,FM Europe system is 50KHZ,FM American system is
10KHZ,AM Europe system is 9KHZ.when the frequency get top it
automatically return to the lowest.
DOWN: press the button searching radio station at current waveband
downward, once reduce a wavelength,FM America system is
100KHZ,FM Europe system is 50KHZ,FM America system is 10KHZ,AM
Europe system is 9KHZ.when the frequency get to the lowest ,then
return to the top.
MANUAL: press the button ,you will enter the state of debuging
frequency by hand. You can choose the frequency ranging from 87.5
MHZto 108.0MHZ which must be the integer times of
frequency.otherwise,it will handle frequency automatically,adjusting
to the nearest frequency.eg:supposed you want to listen to
FM97.1MHZ,just press the button.,then press the number button
9710,and it will play the radio station automatically.furthermore,if you
want to listen to 106.2MHZ,please press the button[MANUAL],then
input 10620.
Press the number button[0-9]and[10+],you can turn to the radio
sation which have been stored in .you also press the button[next]o
skip to the next station ,[prev]o skip to the former one.
LOUDNESS:the button is to swich the volume modes.there are
total four echoes for choices.you can choose among [0-3]when press
the button[0-3]in turn ,then ,LCD would read:LOUND0, LOUD1 and
so on.
SPEAK:the button is to choose speaker.there are 4
choices.SPEAKER ALL means that four speakers are at
work.,SPEAKER FR means the front two speakers at work,SPEAKER
BA means the back speakers at work.
VOL- and VOL+:the button is to debug.the volume,there are total
31 grades.eg:LCD reads [VOL25] hows that current volumei is the
25th grade.
TREB- and TREB+:the button is to debug high volume,there are
total 15 grades aranging from-7 to +7.
BASS- and BASS+: the button is to debug low volume,there are
total 15 grades aranging from-7 to +7.
SAVE: save the current frequency in the appointed position,when
press the button,there will read [save],you can press the number button.
If you want to save it in positions more than 10 ,press [10+],the biggest
is 20.after that ,if you press the button[0-9],the current frequency is
saved to the appointed position.
10
11
Page 9
Frequent operation
Frequent operation
6. Frequent operation
We will introduce some regular
operations of differenttypes of function,
the user can perform one or more
operations as you like, In addition
chapter 7details purposes and
operationsof all buttons
Select part to beplayed with menu
If DVD disc to be played has menu, when
PBC. state is on you can display the
1
menu by pushing [MENU/PBC] or
[TITLE], whereon you select a popular
part to play. you can operate following
2
3
procedures
1.Push[MENU/PBC]
The screen display menu picture, the
content to be selected varies with
differentdisc.
2.Push[UP], [DOWN], [LEFT], [RIGHT]
Move the lighting band to the desired
itemor Made by pushing thesebuttons
3. Push [ENTER] to confirm selecting
theitem
This moment the screen may display a
submenu. You can also push [UP],
[DOWN]. [LEFT], [RIGHT] to confirm
selecting the push [ENTER] to comfirm
theselection
Playfast backward
While playing you can push [FB] button to play fast backward.
Four speed are available to play forward, press it once the speed
grows by one shift, when the speed reaches maximum speed,
press[FB] again to return tonormal state.
Slowplay
While playing push [SLOW]to play slowly at different speed. You
can play slow forward or backward, three shift speed are
available for either of them. Push [SLOW] once, press it once the
speeddecreases by one shift, finallyit returns to normalstate.
Skipto next chapter/track
Whileplaying push [NEXT] button.
Skipto previous chapter/track
Whileplaying push [PREV] button.
Select track
Thereare more than one operationprocedure available
A.Push [NEXT] or [PREV] to skip to the next or the previous
trackand play.
!
B.For those discs with track numbered directly push number
buttons to enter the No. of desired track to play. If the moment
the screen displays , so there may be three possible
reasons:(1) the track in the disc is not numbered; (2) the
number entered beyond the scope; (3) PBC is on (push [PBC] to
shiftPBC state);
C.Selectamong the song track list(refer to the nextchapter).
Play fast forward
While playing you can push [FF] button
to play fast forward. Four speed are
available to play forward, press it once
the speed grows by one shift, when the
speed reaches maximum speed, press
[FF]again to returnto normal state.
12
Display the track list
For DVD discs, when PBC is on, push [MENU] to display the track
list, the moment firstly push [UP], [DOWN] to select a track then
push[ENTER] to play,
For non-DVD discs, when PBC is on, while playing push
[RESUME] to display the track list, the moment you can directly
enterNo.to select.
Youcan push [MENU/MANUAL] to change PBC state.
13
Page 10
Frequent operation Frequent operation
Attention:whether the above procedures
workwill be subject to thetype of disc.
Repeat play
While playing you can push [REPEAT] to
selectdifferentrepeat content.
1 For DVD discs.push [REPEAT] to repeat
chapter push [REPEAT] again to repeat title,
push[REPEAT]again to exit.
2 For non-DVD discs, when PBC is off, push
[REPEAT] to repeat the track content, push
[REPEAT] again to repeat all disc, push
[REPEAT]again to exit.
Select subtitle Language (subject the Type
ofdisc)
For DVD disc, you can push [SUBTITLE] to
select the language of caption.e.g. English.
Press it once, the screen will display
availablelanguage alternatively.
Displayplaying time andstate
Push [DISPLAY] button, TV screen will
display current play time state, i.e.playing
time, remaining time, press [DISPLAY] each
time, the screen will show a time alternatively
(the time displayed in the frontal panel
accordingly changes), the content to be
displayed each time will subject to the type of
thedisc.
Mp3operation
MP3 is recently introduced disc, which is recorded with MP3
format audio program. This DVD player supports MP3 disc, you
canoperate following these procedures:
Push [EJECT] to eject tray, load MP3 disc, push [EJECT] again,
TVscreen will display following pictures
Use Direction key to move the cursor and use
Enter key or PLAY key to enter the corresponding
directory or select the corresponding file for
playing. The option list of play modes lists some
play modes. When LEFT/RIGHT key is used to
move the cursor to a certain option, UP/DOWN key
may be used to select a play mode. After the
selection is completed, LEFT/RIGHT key may be
used again to move the cursor to the directory or
file to be played. And then press PLAY key (if it is
in the directory, it is probably required to press the
key twice) to start playing the disc.
14
15
Page 11
Frequent operation
System setting
Attention:
While playing, you can
push[PREVIOUS] or[NEXT]
to play the previoustrack or
thenext one.
While playing you can
push [STOP] to back to the
menupicture.
There are two kinds of file disc play mode:1. No-menu play mode.2.
Menu play mode. The factory default play mode of this unit is no-menu
play mode. Please refer to the description on [SETUP] setting menu for
the information on the switching of play modes.
In the first play mode, after a disc is put into the player and the player
reads the disc, the player will go into [STOP] state and display [STOP]
on DVD display panel.
At this time, you can press a numerical key to select a file and play the
disc starting with the selected file or press [PLAY] key to play the disc
starting with the first file of this disc. This file may be either an MP3 file
or [MPEG] file. When an MP3 is being played, you can press [DISPLAY]
key to view file play time.
2. If your disc contains files of multiple formats, press [STOP] key after
the play of the disc is finished and display the picture that you can`t
usage [UP]or[DOWN ]key controled the menu.But you may press
Previous or Nextkey to view track numbers in the list on the right side or
directly press a numerical key to select a track to play.
After a JPEG file disc is read out, you can press PLAY key to start
playing.
7. System setting
Push [SETUP], the screen will display system setting menu, the
moment you can push [UP], [DOWN] to move the high lighting
band to the desired item, push [ENTER] to display sub-menu. In
the sub-menu push [RIGHT] to enter inferior sub-menu. You can
push [UP], [DOWN] to move the high lighting band in all menu
pictures. Push [ENTER] your selection will be valid. Push [LEFT]
to escape the sub-menu in the right of the screen. Any time push
[SETUP]or [EXIT SETUP] you willescape system setting state.
The high lighting band
indicatescurrent item
The explanation to the
current item
Following are some examples of frequent setting the user can
settingother items following their instructions.
Example1:Set TV screenratio mode
1.Push [SETUP] to enable the screen display the system
setting picture, make sure the high lighting band has been
located in GENERAL SETUP push [ENTER], TV screen will
displayfollowing picture.
16
17
Page 12
System setting
System setting
2.Push [RIGHT] to enter the sub-menu in the sub-menu in the
right screen. If you want to set the screen to "WIDE",firstly push
[DOWN] twice to movethe high lighting band to "WIDE' item, then
push[ENTER],
3.Push[MAIN PAGE]to exitsystem setting.
Notes:threescreen ratio modes, i,e, 16:9 WIDE, 4:3 PS, 4:3 L are
available for your selection to enable different discs to match TV.
the relationship between the video of disc and screen ratio mode
areas follows:
Video of disc normal 4:3PS 4:3LB 16:9
4:3
16:9 16:9
Example2:Set sound mixoutput mode
1. Push [SETUP] to enable TV screen display system setting
menu picture, push [DOWN] to move the high lighting band to the
item"SPEAKER SETUP", push [ENTER], TVscreen will display
2. Push [RIGHT] to enter the sub-menu in the right screen, If you
once to move the high lighting band to "STEREO" item, then
push[ENTER].
3,Push[MAIN PAGE]to exitsystem setting page.
Example3: Coaxial output
Ifthe user use coaxial terminal to outputaudio signal, you need to
set the audio output "SPDIF/RAW' or "SPDIF/PCM", you can
operatefollowing these procedures:
Push [SETUP] to enable TV screen display system setting menu
picture, please firstly enter general setting sub-menu,then
select the item "AUDIO OUTPUT" in the menu, then push
[ENTER],TV screen will display:
2.Push [RIGHT] to enter the sub-menu in the right screen, push
[DOWN] to move the high lighting band to the item"SPDIF/RAW"
or"SPDIF/PCM",then push [ENTER].
3.Push[MAIN PAGE]to exitsystem setting.
Special indications: if you are not going to use coaxial output
audio signal, you need to set audio output to "ANALOG' output, so
there will be no audio signal to set audio output to "ANALOG"
output, so there will be no audio signal to be output in the
mixchannel.
want to set the sound mode to "STEREO", firstly push [DOWN]
18
19
Page 13
System setting
Example4: Set agecontrol grade
For original DVD disc, parents can prohibit the those content
inadvisable to children to be played, you can operate following
theseprocedures to set age controlgrade:
1.Push[POWER] ,
2.Push [SETUP] to enable TV screen display system setting
menu picture, push [DOWN] till the high lighting band move to the
item "PREFERENCE", push [ENTER],then push [DOWN] till the
high lighting band move to the item "PARENTAL", TV screen will
display:
Pleasepress [BAND] to choose DVD state.
System setting
2. Push [RIGHT] to enter the sub-menu in the right of the screen. If
you want to set the language of operation indication or menu
display to English, you can push "UP" or "DOWN" to move the high
lighting band to "English", then push [ENTER], the language of the
menuin the screen will turninto English.
3.Push[MAIN PAGE]to exitsystem setting.
3. The submenu SMART NAV in PREFERENCES item is
used to set whether there is a menu when an MP3, MPEG
file disc or JPEG file disc is played.
3. Push [RIGHT] to enter the sub-menu in the right of the screen, if
you want to change the age control grade to 3, push [DOWN] till
the high lighting band move to the item "3PG", the player will
indicate you to enter password, if the ex-factory password has
never been modifiied, you can push number buttons "4408" in the
remotecontrol.
4.Push [SETUP] to exitsystem setting.
Example 5: Set Operation indication or menu display
language
1.Push [SETUP] to enable TV screen display system setting
picture, push [ENTER], push [DOWN] till the high lighting band
moveto the item "OSD LANG", TV screen will display:
20
For other description of this menu, please refer to the User
Manual provided at an earlier time.
21
Page 14
Functions of buttons in
remote control
8. Functions of buttons in remote control
This chapter will detail the functions and operation procedures of
all buttons in the remote control, for users' instant reference. Most
operation procedures can be referred to relevant content of
chapter4, 5.
8.1[ ]
When the DVD player is in stop, pause, slow play, fast forward,
fastreverse state, you can push[ ] to resume normalplayback.
Push[ ] again, the DVDplayer will be pause,push[ ]again,
itwill play.
8. 2[TITLE] (whether if works depends onthetypeofdisc)
Push [TITLE] to display the title menu included in DVD disc. In the
menu picture, you can push [UP], [DOWN], [LEFT], [RIGHT] to
move the cursors to define desired item, then push [ENTER] to
selectthe part to be played (or thesub-menu, this moment you can
also push [UP], [DOWN], [LEFT], [RIGHT] to movethe cursors to
definedesired item, then [ENTER] toplay).
8.3[EJECT]
Push the button once,the tray will be ejected, press it again to
close the tray. When you want to load or unload disc, youcan use
thisbutton.
8.4[REPEAT]
Pushthis button to repeat chapter,title &disc.
8.5[ZOOM]
While playing push this button to zoom out the image, push the
button once to enlarge the image by two times, push it twice to
enlarge it by four times, press it another time to resume normal
playback.
8.6[MENU/PBC]
While playing DVD, push this button to display the option menu
included in the disc (whether it works depends on the type of the
disc). Push this button to shift PBC state. For DVD/SVCD disc,
when PBC is off, while playing you should firstly push [STOP]
button,then [PBC] to open yet.
Functions of buttons in
8.7 [ ]
While playing DVD disc, push the button to skip to next chapter;
while playing SVCD and other discs, push this button to skip to
nexttrack
8.8 [ANGLE]
while playing DVD disc with multi-angle function, push [ANGLE]
to play the video in differentangles at your option. Push the button
eachtime, the player will beshift to a scene in another angle.
8.9[MUTE]
Push this button to silence the sound output through analog
channel.
8.10[ ]
Pushthis button to playfast forward silently,press it once, the disc
forward at a newspeed and finally returnto normal playing state.
8.11[ ]
Push this button to play fast backward silently, press it once, the
disc backward at a new speed and finally return to normal playing
state.
8.12[SLOW]
Push this button to play slow silently,it canbe played slow forward
or backward, press it once to shift a speed and finally return to
normalplaying state.
8.13[DISPLAY]
Push the button to display some data of time, e, g. the current
playingtime, remaining time, etc.
8.14[ ]
While playing DVD disc, push the button to skip to previous
chapter; while playing SVCD and other discs, push this button to
skipto previous track.
8.15[ENTER]
Pushthe button to execute the entered or the selecteditem.
8.16[UP],[DOWN], [LEFT], [RIGHT]
When the screen display the menu of DVD disc or system menu,
(whetheritworksdependonthe type of disc)
(whetheritworksdependonthe type of disc)
remote control
22
23
Page 15
Functions of buttons in
remote control
Functions of buttons in
remote control
the player is in waiting state, you can push these buttonsto move
thecursor then select the desireditem.
8.17NUMBERBUTTONS
[0], [1].... [9] number buttons are used to enter number, e.g. No. of
track,DVD chapter No., time data,etc.
8.18[10+]
When the No. of a track or a chapter is over 9, firstly push [10+]
thenpush relevant number buttons.The button is usedto enter the
number in decade of the No., press it each time, the number in
decadewill increase by 1.
8.19[SETUP]
Push the button, the screen will displaysystem setting picture, the
user can select some relative constant parameters. The user also
can set it as needed. Detailed operation procedures please refer
tochapter six.
8.20[ ]
While playing DVD, push the button once to pause playing, push it
twice to completely stop playing. Whether this function works
subjectto the type of disc.
While playing VCD/SVCD and PBC being on,push [STOP], you
canreturn menu.
once to change to another language. (This operation works only
forthe disc with multi languageaudio).
8.23 [BAND]
Push [BAND] again, the unit will turn to "LINE IN tate,you can
watchother program or play gameby LINE INPUT on front panel.
"s
8.24 [VOL+, VOL-]
Push[VOL+] to increase volume, push[VOL- ]to lower tovolume.
NOTE:DVD WITH TV TUNER MODEL,THE [DVD/GAME]
KEYIS EXCHANGED BY[DVD/TV/GAME]
1.Push [BAND] ,the unit will turn to ``TV`` state,then
again
push [SETUP],and choose AUTO SEARCH,push [RIGHT] of
direction key,and choose ON by direction key. Then push
[RIGHT].This time,the unit will search and remember TV
proramautomatically.
2.You can choose TV program by [UP] and [DOWN] of
directionkey.
3.You can choose TV program by number key.
Fox example,if you want to choose 18 CH, please push [10
]thenpush[8].
4.You can tune finely by[LEFT]and [RIGHT]of direction key.
5.Push [BAND] again,the unit will turn to ``INput``state,you
can watch other program or play game by LINE INPUT on
frontpanel.
+
8.21[SUBTITLE]
Push this button to select caption indication language, e.g.
English, etc. Press it once to change a caption Language.(This
operationworks only for the discwith multi subtitle encoded).
8.22 [AUDIO]
Push this key to select the language of sound on the disc, push it
24
25
Page 16
Technical terms
Specifications
9. Technical terms
TITLE:For DVD disc it is defined as a long complete segment of
image or music or a movie. Each title has a number that makes it
easyto search.
TRACK: The image or music of a VCD or CD. Each track has a
numberfor search.
CHAPTER:It is smaller than title among the units of a DVD, it is
defined as a long complete segment of image or music or a movie.
A title is made up of several chapters, and each chapter has a
numberfor search.
CAPTION:The literature in TV screen bottom, generally it is
translationor dialogue, also recorded inthe disc.
ANGLE:For some DVD discs, they record pictures filmed from
different angles, the user can watch a same picture from different
anglesat your option.
10. Troubleshooting
Nosound
Check if the unit is connected securely with other systems
includingamplifier or TV;.
Makesure you operate the TV or amplifier correctly.
Makesure the system setting is correct.
Disccan not beplayed
Makesure the disc has beenproperly in the tray.
.
Checkwhether there is only discin the tray.
Makesure the disc is clean
.Remotecontrol does notwork
Removebarriers from the remotecontrol. Replace the batteries
withnew ones.
Pointthe remote control at theremote control sensor ofthe unit.
Checkwhether the batteries energy issufficient.
Twistingimage
Checkwhether the disc is scratchedor there is dirtwhereof.
This player is controlled by micro computer,if any troubleoccurs,
please turn off the power,reopen it till 10 minutes later,when there
isnotrouble the moment, you cannormally operate the player.
Buttondoes not work
This may caused by unstable electricity current or other abnormal
trouble,please turn off the power, reopen it till 10minutes later.
11. Specifications
Playable discs:
Videoformat:
Audio format:
Signaloutput:
Functionaloperation:
Output interface:
Powervoltage:
Powerconsumption:
Frequencyresponse:
Audiosignal/noiseratio:
1.2kg
Weight:
Productdimension:
Accessories:
DVD/SVCD/DVCD/VCD1.0,1.1,2.0(micro laser
video/audio disc) CD - DA (common music laser
CD), MP3 audio disc,CD-R,CD-RW
MPEG1,MPEG2,PCM, DOLBY DIGITAL,DTS;
MPEG1,MPEG2,PCM, DOLBY DIGITAL,
DTS;analogstereo,
videosignal: NTSC or PAL
video:1.0Vp-p
audio:mix stereo 2Vp-p
pleaserefer to chapter 7.
RCA output, high-resolution system (S-VIDEO)
output,coaxialdigital output
DC9.5-24v
15W
DVD:20Hz-20KHz
90dB
178x176x50(mm)
audio/video cable, remote control (with
batteries),user'smanual, video CABLE.
Notes:
Any change to
the design and
specifications
will not be
advised.
26
27
Page 17
How To Deal With Disk
How To Deal With Disk
Attention
Don't write on the labeled
side.
Don't use pickup cleaning
preparation. phenyl,
chemical solution,
dispersing solution, antistatic electricity solution or
any otherkind ofsolutions to
cleandisk
Don't stick label or gluebased note on disk(Don'tuse
disks with remaining glue or
damagedgluey lable)
Don't use scratchingpreventingmaterials orcover,
unlessitis assignedto useon
thismachine.
Don't put or store disk at
following environments.
straight under the sunshine.
/at moist or dusty places at
the exit of hot air or beside
heatinginstallation.
Howto hold disk
Don'ttouch the facecarving information.
Whenthere are stainson the faceof disk
wipegenitally with a wet clothand then with adry one.
When a disk is brought from a cold environment to a hot one, there
could be steam on the face of disk. wipe with a dry, soft, smooth
clothbefore using.
28
Loading...