Pyle PLSD131BT User Manual

PLSD131BT

Motorized Foldout Monitor Holder

13.3 Inch Million Multi-color Illumination

TFT Touch Screen

Detachable Control Panel Remote Control Digital Video Disc Player Control Panel USB Port and AUX Input

SD/MMC Card Slot AM/FM-RDS Digital PLL Tuning Radio

BT Compatible

USER MANUAL

To ensure safety while driving

and to comply with laws,

drivers should not watch video or

operate the video device while driving.

Content

Precaution......................................

Safety Information.........................

Disc Note.......................................

Installation ....................................

Electric Connection ......................

Remote Control ............................

Basic Operation ............................

Main Menu Operation......................

Setting animation...........................

Setting disc....................................

Setting radio...................................

Setting BT.......................................

Setting wallpaper............ ................

Version about..................................

Setting time.......... .........................

Setting audio mode.........................

Setting video mode.........................

Setting OSD language....................

Setting illumination color.................

TFT display calibration. ..................

Reset Factory Settings ...................

Rear View Camera ........................

Alternate Audio Source....................

Control Panel ................................

Unit keys ........................................

Radio Operation............................

2

Listening to the radio ......................

3

Storing and Listening to a memory

4

station ........................................

5

Automatic Memory Storing &

10

Program Scanning.......................

11

RDS function..................................

14

Media Operation.............................

14

Basic Operation ..............................

14

Selecting Play Mode ........................

15

On-Screen Display Function .............

15

Digital Video Special Function........

15

Multi-Subtitle Language function.......

15

Multi-audio language Function..........

15

Tit le m en u fu nc ti on . .. .. .. .. .. .. .. .. .. .. .. .. .

15

16

BT Opera ti on ............................... .

16

AUX Operation ...............................

16

AV Operation..................................

16

USB Operation ...............................

17

Card Operation ..............................

17

SWC Operation..............................

17

Specification .................................

17

Troubleshooting.............................

18

20

21

23

24

25

26

27

30

31

32

33

34

35

-1-

Precaution

THAN K YOU FOR PURCHASING THIS CAR DIGI TAL VIDEO PLAYER .

Befo re operatin g the unit, rea d this manual thoroughly and keep it handy for fu ture refere nce . To avoi d injury or acc ident , read th e following p recaution s before inst alling and op erating the u nit .

ON INS TALLATION

DO NOT install any receiver in locations where;

- it may o bstruct the s teering whe el and gearsh ift lever operations, as this may re sult in a traffic accident.

- it may o bstruct the o peration of s afety devices such as air bags, as this may re sult in a fatal a ccident.

- it may o bstruct vis ibility. DO NOT operate any receiver while manipulating the steering wh eel, as this m ay result in a tr affic accident. The dr iver must not w atch the moni tor while dri ving. IF THE DRIVER watches the monitor while driving, it m ay lead to care lessness an d cause an acci dent. IF YOU NEED to operate the receive while driving, be su re to look ahea d care fully or you ma y be involved i n a traffic acciden t. IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the moni tor, and no play back pictur e will be shown .

- This warning appears only when the parking brake wire is connected to the pa rking brake s ystem built i n the car ( refer to the electric connection)

ABOU T THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not p ress on the LCD p anel on the uni t as doing so can d istort the pict ure or cause a ma lfunction . The picture may beco me unclear , or t he LCD pa nel may be dama ged .

NOTE S ON CLEANING

-Cle an the LCD pane l with a slight ly damp soft cl oth.

-Do no t use solvent s such as benzi ne, thinner, c ommercially available clea ners or antis tatic spray .

-Do not use alcohol to cle an the screen .

If you r car was parke d in a cold or hot pl ace, the picture may not be clear . The monitor is not damaged . The picture will become clear the temper atur e in your car bec omes normal .

-2-

Safety Information

CAUTION:

THIS DIGITAL VIDEO PLAYE R IS A CLA SS I L AS ER P RO DU CT. HO WE VE R

THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .

HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER C OR RE CT LY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THO SE S PE CI FI ED H ER EI N MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OP EN C OV ER S AND D O NO T REPAIR YOU RS EL F. REF ER S ERVICING TO Q UA LI FI ED P ER SO NN EL .

WARNING:

TO RE DU CE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO RE DU CE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATI ON .

REGI ON MANAGEME NT INFORMATION:

This Digital Vi de o Pl ay er i s de si gn ed a nd m an uf ac tu re d to r es po nd t o th e Re gi on Management Information that is recorded on a Digital Video disc. If the Region

number described on the Digital Video disc does not correspond to the Region number of this Digital Video Player, this Digital Vi de o Pl ay er c an no t pl ay t hi s di sc .

-3-

Disc Note

Disc f ormats supp orted by this play er

CD

Audio and Vide o Disc size 1 2 cm

Audio Disc size 1 2 cm

Digital Video

VCD

CD

MP3

Dig ital Video

VCD

MP3

Disc s which canno t be played with t his player

Digital Video-RAM CDV CDG

Hand ling and Clea ning

Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Disc C leaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note :

A disc may become somewhat scratched (although not enough to make it

-4-

unusable) depending on your handle it and conditions in the usage environment.

Note these scratches are not an indication of any problem with the player.

Lab el si de up

Do no t tou ch the und ers ide of th e dis c

Do no t ben d

Wip e the d isc f rom center tow ard t he ou tsi de edg e

Preparing New Dis cs with Rough Spot s

A new dis c ma y ha ve r ough edg es o n its ins ide and outs ide edge s. I f a disc with r ough edg es i s us ed, the prop er setting wil l no t be per form ed a nd t he player will no t p lay t he disc. Ther efore, remove the r o u gh ed g e s in a d v a nce by using a ball point pen or pencil as shown on the right. To r e m ove t h e rough edges, press the s i d e o f t h e pen or pencil against the inside and outside edges of the disc.

Rou gh spot s on out side ed ge

Bal l point p en or pe ncil

Rou gh spot s on in side edg e

Installation

NOTE S:

Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its optimum performance.

'

30

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FR ONT/REAR- MOUNT

This unit can be properly installed either from "Front"(conventional DIN Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

-5-

Installation

INST ALLATION ST EPS

1. Remove the chassis from Slide Bracket Housing;

1) Press the REL bu tt on t o re le as e th e co nt ro l pa ne l ;

REL button

2) Hold the right side of the control panel to pull it rightwards a little and then to you for removing it ;

1

3) Remove the PLASTIC FRAME from the chassis (see the Installation diagram);

4) Insert the 2 KEY PLATES i nt o th e gr oo ve s at t he b ot h si de s of t he c ha ss is t il l they click(see the Installation diagram);

5) Pulling the two KEY PLATE S to r em ov e th e ch as si s fr om t he S li de B ra ck et Housing ;

2. Mount the Sliding Bracket Housing in the position of car multi-media system and bend some tabs of Sliding Bracket Housing to fix it.

3. Connecting all wires:

1) Connecting all wires according ot the wiring diagram on next page;

2

-6-

Installation

2) Attaching the control panel onto the chassis;

(1) Insert the left side of the control panel into the hollow of the chassis . (NOTE : the “bulge” point on the control panel must be attached into the hollow of the chassis .)

(2) Gently push the right side of the control panel till you feel a “ Click” .

Hollow

Bulge

3) Testing it for making sure that it can work properly .

4. Installing chassis according to the installation diagram on next page:

1) Insert the chassis of the car multi-media system into the Sliding Bracket Housing.

2) Use the metal strap to fix the rear part of chassis.

5. Installing the monitor refer to next next page.

* Uninstalling the chassis:

1) removing the monitor refer to next next page

2) Remove the metal strap from the chassis ;

3) R em ov e th e co nt ro l pa ne l fr om t he c ha ss is ;

4) Remove the plastic frame from the chassis;

1

2

5) Insert 2 key plates into the left and right sides of the chassis and draw the chassis out of the sliding bracket housing.

-7-

Installation

Installating the unit

DASH BO ARD

HEX NUT

SPRIN G WASH ER

PLAIN WA SHE R

TAPP ING SCR EW

SCREW DRI VER

METAL MOU NTI NG STRAP

TABS

CONSO LE

KEY PLATE

SLIDE B RAC KET HOUSI NG

HEX BOLT

PLAST IC TR IM OU T

KEY PLATE

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.

-8-

Installation

Installing the monitor.

1) Press the OPEN/MONITOR-ANGLE button to slide the monitor holder out and stand it up.

2) Insert the 2 bulges of the monitor into the 2 hollows of the monitor holder and flip up the monitor, then push the top middle part of the monitor to make the monitor attach onto the monitor holder.

Hollow

Bulge

Hollow

Bulge

MONITOR R EL

Removing the monitor.

1) Push the MONITOR REL to detach the monitor from the monitor holder;

2) Hold the top part of the monitor to pull away from the monitor holder and lift it up to remove it.

-9-

Electric Connection

WI RIN G CON NEC TIO N

RCH IN RE D

VIDEO O UT(2) YELL OW

VIDEO I N YEL LOW

LCH IN WH ITE

RCH RED

LCH WHI TE

RADIO AN TENNA JA CK

IGNITION S WIT CH( B+)

MEMORY B ACK -UP (B+ )

GROUN D(B -)

AUTO AN TENNA

AV IN

REA R OUTPU T CAB LE

FUSE

RED

YEL LOW

BLACK

BLUE

FRO NT RCA OUT PUT CAB LE

ISO C ONNEC TOR

SUBWO OFER GR EY

REAR CA MERA INP UT YE LL OW

FRONT RCA RED R

VIDEO O UT YE LLOW

FRONT RCA WHI TE L

KEY GROUND (BLAC K)

KEY 1(VIOL ET)

KEY 2(ORAN GE)

PIN K

BROWN

(B+)1 2V REAR CA MERA SWI TCH

(B-)PARKI NG BRAK E

FRONT

LCH SPK .

REAR

LCH SPK .

WHI TE

WHI TE/BL ACK

GRE EN

GRE EN/BL ACK

GRE Y

GRE Y/BLA CK

VIO LET

VIO LET/B LACK

FRONT RCH SPK .

REAR RCH SPK .

Note:

the earth connection cable (parking brake B-) must be connected in order for pictures to be played back to the monitor. If the cable has not been correctly connected, the message “PARKING BRAKE” appears on the monitor.

-10-

Remote Control

Ref #

1

Button

CLK

15

7

17

MOD EMODE

RED IAL

MUT EM UTE

PLAY /PAUSEPLAY /PAUSE

ZOO MZOOM

STO PSTO P

MO/ STMO/ ST

19

2

22

14

18

10

13

6

24

11

4

MEN UMEN U

LO/ DXLO/D X

OSDOSD

BAN DBAND

TITL E/PBCTITL E/PBC

A/P SA/P S

VOLV OL

SELSEL

SET UP SET UP

PAIR

TOP

11

RDM

44

77

GOT OGOT O

LOU D

EQEQ

ENT ERENT ER

RPT

22

55 66

88

+1 0+1 0

CLKCLK

INT

AF

TA

33

99

00

8

Function

Press it briefly to view the clock time .

16

3

5

20

1

21

23

9

12

27

26

25

2

3

4

5

6

7

PAIR/

STOP

SETUP

MO/ST (AUDIO)

SUBTITL E LOCAL/ DISTAN T

Redial/

Press it to use the BT function , ref er to se e BT op er at i on . Press once to pause playback. Press PLAY/PAUS E to r es um e

playback. Please note: if you press STOP tw ic e, p la yb ac k wi ll start at the beginning of the disc.

Press this button to open the SETUP menu.

In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens the AUDIO setup menu for making changes to the way the soundtrack is reproduced.

In Digital Video Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far.

Pres s it to use the BT funct ion , ref er to see BT oper at ion .

-11-

Remote Control

Ref #

8

9

10

11

12

13

14

15

16

17

18

Button

GOTO

/

SEL

VOL+/-

/ / /

Menu SubWo of er ( )

BAND (OSD)

/MOD

PLAY/ PAUSE

MUTE

TITLE/ PBC(A/P)

Function

Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In BT menu, it serves as the asterisk button on your mobile handset.

Press these buttons to skip ahead or back one track.

Press the S EL (except r adio mode ) to

BALANCE , FAD E,COLOR ,RIGHTN ES S, CONTRA ST, TINT , BT, REG

(in radio m od e),PI(i n ra dio mode) , TA(in ra dio mode), AF( in radio mo de ), LOUD, SWF, EQ , mode),

After swit ch ing on the de sired mod e ab ove, rota te VOL knob to set i t.

TIME 12H/ 24 H,CLOCK , BE EP, EUR/U SA FR EQ, ANIMATION.

DX/LOCA L( in radio mo de ),STERE O/ MONO(in r ad io

switch be tw een BASS, TREBLE,

Use these controls to adjust the volume level.

Press to navigate the various menus present in the product.

Press this button briefly to display the root level directory of a Digital Video disc. Press and hold this button to

between 80H Z, 120HZ and 16 0HZ

.

switch SWF FR EQ

In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 > AM1( MW 1) > AM 2 (MW2). In Disc Playback modes, Press this button to see information about the disc currently in play.

Press this button to turn the unit ON , press and hold to turn the unit OFF. Press it briefly to select a desired wo rk source.

In Disc Playback mode, press to pause playback. Press again to start where playback stopped.

Press this button to turn off the audio. Press again to restore the sound to its prior volume level.

When playing a Digital Video, pressing this button will o pe n th e TITLE menu which is recorded on the media. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons.

19

20

21

22

ZOOM

EQ/LOUD

Press this button to Open/Close the operate monitor .Long press it to adjust the angle of monitor Upward/Downward

Shortly press it button to increase the picture in size .

Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening. Press longer to switch the LOUDNESS function between LOW, MIDDLE, HIGH

and OFF.

In Disc Playback mode, press for fast forward playback.

-12-

Remote Control

Ref #

23

24

25

26

27

Button

ENTER

0-9 0/TA

9/AF

+10/

1-6

This button is used to confirm selections and settings within many of the menus in the OSD system.

In DISC mode, press it to reverse rapidly

Use to input numerical values during programming, with the GOTO button, or to directly select a track to play . In Radio mode, (when the RDS engaged,), 0 serves as TA function, 9 serves as the AF function .

This button is used with the other number buttons for use with two-digit number entries. In BT menu, it serves as the hash

button on your mobile handset.

Six numbered preset buttons store and recall stations for each band

Function

Preparing the Remote Control

Inse rting the Bat tery

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

3

1

2

4

Usin g the Remote Co ntrol

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation .

-13-

Basic Operation

Main Menu Operation

In many modes, touch the icon or touch the range to enter the main menu, the message like following as below.

GENE RAL

CLOC K

AUDI O

VIDE O

10: 00AM

(4)

(3)(1) (2) (5)

1. POWER icon In any modes, touch the POWER icon to switch the unit off . Th e mo ni to r wi ll draw in automatically .

2. UP/DOWN icon Touch this icon to adjust the angle of the monitor upward or downward until your desired angle .

3. EJECT icon Tou ch t o al lo w fo r in serting or ejecting disc.

4. When the unit is power on, tap to turn off the display and the unit still work, tap anywhere of the display to turn on the display again.

5. SETUP icon Tou ch t o en te r the SETTING mode, the message will display as follow :

Touch the “ ” section on the setting menu, touch the “ / ” ranges to select the adjustment item, Touch the “ ” icon to return to the previous playback .

Setup int er face 1

LANG UAGE

ILLU MINATI ON COLO R

CALI BRATIO N

Setup interfa ce 2

ADJUSTABLE ITEMS:

GENE RAL

ANIM ATION 2 MI NUTE

KEY BE EP ON

DISC . ..

RADI O ...

General s et up interf ac e1

GENE RAL

BT ON

WALLPA PER ...

ABOU T ...

General s et up interf ac e2

ANIMATION

In RADIO mode, you can change the playing time of animation among of “OFF, 10S, 30S, 1M,90S, 2M, 3M and 4M ”.

Note:

Please set the playing time of the animation to “ 10S ” for the first, when you turn the unit on .

KEY BEEP : ON or OFF.

-14-

00:2 5:08 01 :03:0 2

Basic Operation

Disc s etup as follo w:

DISC

FORM AT NTSC

TV TYP E 4:3PS

RATIN G ADULT

FORMAT

This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select). The d is ad va nt ag e to autoselect is that each time you turn the unit on it checks to see what kind of monitor is connected, which causes a small delay and some flickering of the display image which you may find unpleasant.

TV TYPE

16:9

4:3 Pan Sc an

4:3 Lett er Box

Wide (For 16:9 TV)

Select when a wide-screen TV set is connected.

RATING

Select to turn Parental Control on or off.

The factory default password is 0000. (The password must be used to make

changes to the Parental Control menu below .) Key in “000 0” and then turn to rating then you can setting as follow: KID SAFE -> G -> PG -> PG-13

-> PG R -> R ->NC-17 -> ADU LT

RADIO

DUAL: touch to select stereo or mono.

LOCAL: touch to select local or distant.

AREA: touch to select radio frequency as USA or EUROPE.

BT

Touch to select BT function on or off .

WALLPAPER

Touch to select wallpaper .

This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in LETTER BOX style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.)

ABOUT

Touch to show the version information.

CLOCK SETUP

Touch the CLOCK to adjust the time and time format.

CLOC K

HOUR 1 2

MINU TE 36

FORM AT 12HR

AM PM

clock s et up inte rface

-15-

Basic Operation

AUDIO SETUP

Touch the audio to turn to audio quality adjustment.

AUDI O

BASS

TREB LE

SUBW OOFER . ..

EQ USE R

audio set up inte rface 1

AUDI O

LOUD NESS OF F

FADER /BLAN CE ...

audio set up inte rface 2

TREBLE: -7 to +7 Adjust treble level .

BASS: -7 to +7 Adjust bass level .

SUBWOOFER: touch to adjust subwoofer volume and frequency.

VIDEO SETUP

VIDE O

COLO R

BRIG HTNES S

CONT RAST

TINT

Video s etup in terface

COLOR: 0 to 32

Adjust the color for the picture-lighter or darker.

BRIGHTNESS: 0 to 32

Adjust if the picture is too bright or too dark.

CONTRAST: 0 to 32

Adjust the contrast of the bright and dark portion.

TINT: 0 to 32

Adjust the tint if the human skin color is unnatural.

-Adjustable when “NTSC “ is selected for “NTSC/PAL “ .

EQ: touch to select audio mode as follow:

USER -> JAZZ -> CLASS IC - > POP -> ROCK

LOUDNESS: touch to select loudness effect as :OFF -> LOW -> MID -> HIGH

FADER/BALANCE: BALANCE: R 0-10 to L 0- 10

Adjust sound balance between left and right speakers .

FADE: F 0-10 to R 0-10 Adjust sound balance between front and rear speakers .

-16-

LANGUAGE

Touch to select OSD language.

ILLUMINATION COLOR

Touch to select the backlight for all buttons. Tap auto icon the backlight change automatically.

CALIBRATION

Touch the arrow as show to calibration

the display.

Basic Operation

Reset Factory Settings

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.

RE SE T

The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.

Rear View Camera

When connecting the rear view camera the mirror image of the rear view is automatically displayed on the monitor when you change the gear to the back position. (Note: additional monitor can not display the image.)

ALTERNATE AUDIO SOURCE

On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as media players, computers, etc. Via the loudspeakers.

1). Please f connect the external device with stereo jack plug the AUX IN socket .

2). Press the MOD button to select the AUX IN connection.

3). Use the buttons on the external device itself to operate it .

ollowing the diagram below,

AUX IN

A X INU

Hea phon s por

td e

-17-

Control Panel

UNIT KEYS

Contr ol Pa nel

Slidi ng Pl ate dia gra m after r emo ving Co ntr ol Pane l

1. OPEN B UTTON

2.

SEL BUTTON and VO L KNOB

3. MOD

POWER / E BUTTON

4. BUTTON

>>|/

5. TA/A F BUTTON

6. PAIR

7. MUTE B UTTON

8. BUTTON

9. REL BUTTON

/BAND B UTTON

>||/C H1-6

10. |<< / BUTTON

11. EJ ECT BUT TON

12. IR SE NSOR WI NDO W

13. USB P ORT a nd CO VER

14. AUX IN J ACK

15. LCD S REEN

16. SD/ MMC CAR D SLO T

17. RES ET BU TTO N

18. MIC ROPHO NE

-18-

Control Panel

Same functions in any work source

1. POWER/MO DE button In power off mode, pre ss ing POWER /M ODE butto n on r emote con tr ol or press in g POWER/M OD E button on c on trol panel po wers on main un it.

In power on mod e, long press ing POWER/M ODE button on c ontrol pane l or on remote control or to uch icon on sou rce menu powe rs off ma in u nit.

In power on mod e, to switch wo rk source bet ween RADIO, D ISC(after i nserting a di sc), USB(aft er i nserting a US B storage), C ARD(after i nserting a ca rd), AUX IN, AV IN and BT, press POW ER /MODE butto n on remote con trol or on cont rol panel con tinuously.

2. VOL knob & VOL+/V OL- buttons To adju st v olume lev el , rotate VO L knob on c ontrol pane l or press or hol d VOL+ or VOL-

button on rem ote control .

3. SEL button

In normal mod e, k nob is used to in cr ease or dec re ase the vol um e.

Pr es s the SEL(e xcept rad io m ode) to

FADE,COL OR ,RIGHTN ESS, CONT RA ST, TIN T , BT, REG (in rad io m ode),

PI(in rad io m ode), TA(in radio m ode), AF(in ra dio mode) , LO UD, SWF, EQ,

DX/LOCA L( in radio mo de ),STERE O/ MONO(in r ad io mode),

TIME 12H/ 24 H,CLOCK , BEEP, EUR /U SA FREQ, ANIMATIO N.

After switch ing on the desi red mode abov e, rotate VOL knob o r pr ess VOL+/ VO L- button s to set it.

the VOL

switch be tw een BASS, TREBLE, B AL ANCE,

4. MUTE butto n To switch M UT E mode on or off, press MU TE b utton on re mo te contro l or p ress MUTE b ut ton on control pa nel.

5. To switc h be tween EQ mo de s To select a d es ired pres et E Q mode from U SE R/JAZZ/ CL ASSIC/P OP /ROCK, pr es s

EQ/LOUD b ut ton on remote c ontrol cont inuously.

6. To switch LOUD m ode To switch L OU D mode betw ee n LOW, MIDDL E, H IGH and OFF , lo ng press EQ /L OUD butto n.

7. SW button To switch S WF F REQ betwe en 8 0HZ, 120H Z an d 160HZ, lo ng p ress SW but to n on remote cont rol.

8. CLK button Press CLK but ton on remote c ontrol to dis play clock ti me .

9. OPEN or bu tt ons and ico n

To slide th e mo nitor hol de r out and sta nd i t up or into th e mo nitor holde r slot(afte r removing the monitor ), press OPEN b utton on cont rol panel or pr ess button on r emote contr ol;

To adjust the ang le of the monit or, long press b utton on remo te control or t ouch icon on source men u .

-19-

Touch Screen Operation

RADIO OPERATION

Listening to Radio

Touch the RADIO ICON in home menu to enter the RADIO mode:

10: 00 AM10: 00 AM

Sele cting The Fre quency Band

Touch the screen of “ BAND ” section repeatedly to select the band , the message will show in turn :

FM1 FM2 FM3

AM2(MW2)

When a n FM stereo bro adcast is har d to receive

Press ST/MO button on the remote control to select the MONO or STEREO mode .

Star t Searching F or a Station

Manual Search

During Radio mode, briefly touch “ ” to increase frequency by one step of channel spacing.

AM1(MW1)

Briefly touch “ ” to decrease frequency by one step of channel spacing.

Automatic Search

During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.

To tune in strong-signal F M Stat ion only (LO/ DX function)

In radio mode, LOC

remote control to select

select LOC/DX

Long-distance traffic news.

Press bu tt on o n th e

or tap icon

mode of Local and

Storing and Listening to a Memory Station

Sett ing Memory

87.50

90.10

98.10

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below :

- Store in Memory >S el ec t th e fr eq ue nc y ba nd

>S el ec t th e st at io n >Press and the station until it show

the frequency band your select.

- Retrieve a preset station Touch the 1-6 ranges briefly to retrieve

a station which had been stored in the memory in advance the chose number is shown on display .

-20-

101.7 0

107.9

100.8

Touch Screen Operation

Automatic Memory Storing & Program Scanning

Auto matic Prese t Setup

In Radio Mode, touch and keep (for more than 2 ’ S) t he s cr ee n of “ ” r an ge t o active automatic station storage. The radio searches within the current frequency band, e.g. FM , for the

3

stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .

Scan F unction

In Radio mode, briefly touch the “ ” section on the touch screen , the radio briefly plays all the preset stations of the frequency band .

RDS FUNCTION

ADJUSTABLE ITEMS:

REGION SET

Touch to switch the REGION function ON and OFF.

REG FUNCTION

at certain times some stations divide up their programs into regional programs with varying content . REG ON : the message “REG ON” will appears in the display for a few seconds . Note :

- the display capacity is limited . It is possible that in the double display mode some segments of the display are deleted .

- the function REG ON prevents the radio from switching to alternative frequency which have a different regional program content .

REG OFF : the program identification(PI) of the regional program is ignored during the search for an alternative frequency (AF) or a program identification (PI) .

RADI O

RDS PI M UTE

RDS PI MU TE

RDS TA OFF

RDS AF OF F

In home menu, then touch the “ ” ICON to enter the set mode, the message in the display :

ST/M ONO STE REO

LOCA L DX

REGI ON EUROP E

RADI O

Sele ct EUROPE the n power off this unit then power on ag ain to turn on RDS fu nction.

ST/M ONO STE REO

LOCA L DX

REGI ON EUROP E

RDS RE GIONA L ON

RADI O

PI SET

Touch to change between PI MUTE and PI SOUND .

PI MUTE / PI SOUND

(only for r ad io operat io n)

f you are in an area where two program

I

identifications (PI) overlap, you can select the option PI SOUND and PI MUTE for playback of the sound. Alternate switching of the program identification should be avoided .

PI SOUND :

f switching nevertheless occurs the

I

sound of another station is heard for less than one second .

-21-

Touch Screen Operation

PI MUTE :

the sound of another station is suppressed .

TA Traffi c Announcement (Priority For Traffic Information)

In Radio mode, touch the cursor button to switch the TA function ON and OFF .

When the TA fun ct io n is a ct iv at ed , th e TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP dis pl ay lights up.

When the TA fun ct io n is s wi tc he d on , the FM traffic automatically interrupt CD operation (the word TRAFFIC appears in the display).

The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed.

Touch the AF section on touch screen or

swing and keep the SEL kn ob i n th e TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display .

When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency

depends on the signal strength of the current station and varies from a few

minutes in the case of weak signals. Whenever the new AF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message “NEW FREQUENCY “ is displayed for one or two seconds.

PTY FUNCTION

In Radio mode, touch screen of “PTY” range to select the Program type .

PTY Selection of the program type besides the stations name, some FM stations also transmit information on the type of program. This information can be displayed by your car radio .

Interruption of the TA Function:

If you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode .

AF FUN CTION

(Alternative Frequencies)

In Radio mode, touch the cursor button to switch the AF function ON and OFF .

AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations. The radio searches in the background for the best frequency reception of the station that has been tuned into .

Examples of such types of program are :

SPORT NEWS POP WEATH ER . .. .. .

With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY on s cr ee n repeatedly to call up the PTY selection menu. The message “PTY SE EK ” th en appears briefly in the display . When PTY has been selected the radio start searching for corresponding PTY information and stops when the PTY information has been found, “NO PTY” appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode .

-22-

Touch Screen Operation

Media Operation

In audio play mode, the message will display as below : (When Parking Brake is applied .)

Mute function

To select the Equalizer mode

To search fast forward

To search fast backward

To skip the next track

To skip the previous track

Repeat Function

Random Function

Previous menu

Tap to turn to BT PHONE mode.

(after pairing an d co nn ecting a mobile phone with B T function).

The icons for other mode

(The same icon have the same function in each mode)

In PHOTO playing ,tap to change the photo direction.

ZOOM IN and OUT.

For page turning.

Intro Function

To decrease the volume level

To increase the volume level

Loudness Function

Subwoofer Function

Tur ni ng p re -s wi tc hi ng f or t ra ffic announcements on and off

Switching on and off an Alternative frequency

Play/Pause the playing

For page turning.

-23-

Touch Screen Operation

BASIC OPERATION

Paus e (still pict ure)

Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .

Rapi d Forward/R apid Revers e

During DISC playback, touch the screen of “ / ” range the speed of rapid forward/reverse changes according to the disc as follow:

Digi tal Video/VCD/CD/MP3:

Norma l Pla yback 2x 4x 8x 2 0x

Skip ping Track

During DISC playback, Tou ch t he / section on the touch screen to skip to next/back one track.

Note :

For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .

Zoom F unction

Touch the button repeatedly, the displayshow as “zoom 2,

zoom 3, zoom 4 , zoom ½, zoom 1/3, zoom 1/4 , zoom off . ”

Use the direction keys ( / / / on remote control to move the enlarged picture .

Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right .

SELECTING PLAY MODES

During the Disc playback, select the “RPT, RDM, INT ” to select your favour play mode.

1). RE PEAT FUNCTION

FOR Digital Video :

Tap the icon or press the RPT button on the remote control to select REPEAT mode as follows :

CHAPTER REP EAT ON TI TLE REP EAT ON

REP EAT OFF

FOR VCD/CD :

Tap the icon or press the RPT button on the remote control to select REPEAT mode as follows :

REPEAT ONE RE PEAT ALL

FOR MP3 :

Tap the icon or press the RPT button on the remote control) to select REPEAT mode as follows :

REP EAT ON E REP EAT FO LDER (or DI R)

REP EAT OFF

2). IN TRO FUNCTIO N

FOR CD :

Tap the icon or press the INT button on the remote control to play the previous 10 seconds part of each track/chapter on disc. (Touch it again to cancel this mode)

-24-

REP EAT ALL

REPEAT OFF

REP EAT ALL

Touch Screen Operation

FOR VCD :

Press the INT button on the remote control. It display will following

2. Example for VCD/SVCD, when it is on, it will display the information such as:

menu as below :

SEQ PLAY IN TRO 1

T 001/ 004 PBC M IX

Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .)

FOR Digital Video/MP3 :

For Digital Video/MP3 , press the INT button is not available .

3). RD M(RANDOM) F UNCTION

During DISC playback, touch screen of “ ” section ( press the RDM button on the remote control to play in random. Each play mode the order is different . (Depend on the disc used for VCD). Touch it again to cancel this function . Note : in random mode, the button is not available .

ON-S CREEN DISPL AY FUNCTION

screen or press the OSD on the remote control, it will display the following as below :

During playback, touch the

OS D

00:2 5:08 01 :03:0 2

3. Example for Movie or PHOTO . When it is on, it will display the information such as:

F 001/ 003 T 001 /001

DISC Search (GOTO)

FOR Digital Video :

Touch the screen as show or press the GOTO button on remote control;

T 001 /004 C 001 /001 ME NU

the screen will display the following message :

Note: touch the screen or press the OSD on the remote control again to cancel the OSD information.

1. Digital Video , when it is on, it will display the information such as:

T 001/ 004

C 001/ 001 MEN U

00:2 5:08 01 :03:0 2

Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .

FOR VCD (With PBC OFF) :

Touch the screen as show or press the GOTO button on remote control;

T 001 /004 PB C MIX

-25-

Touch Screen Operation

the screen will display the following message :

Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .

For Movie/Photo:

Touch the screen as show or press the GOTO button on remote control;

F 001/0 03 T 00 1/0 01

the screen will display the following message :

Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .

- Some discs only contain one subtitle language.

- When no different subtitle language are recorded, “ INVALID KEY ” will be displayed at screen left top corner.

2. Mul ti-Audio La nguage Function

For Digital Video:

During Digital Video playback ,

on the remote .) Each time the button is pressed or touch , number of the audio soundtrack language changes on sequential order.

touch the icon on touch screen (or press the LANG

Notes:

- The language number is diff er en t according to the disc.

- Some disc only contain one language soundtrack

- When no different language soundtra ck are recorded will be display at screen left top corner.

For VCD/CD:

during playback, touch the AUDIO section of the touch screen or Press AUDIO on the remote . It is possible to switch the sound between monaural and stereo sound.

MON O LEF T MON O RIG HT

“ INVALID KEY ”

MIX -MO NO

STE REO

3. Title Menu Function

Digital Video Special Function

1. Mul ti-subtit le Language Func tion (for Dig ital Video Only)

During Digital Video playback. Touch the icon on touch screen(or press the SUBT on the remote) .

Each time the button is pressed or touch, number of the subtitle language changes in sequential order.

Notes:

- The language number is diff er en t according to the disc.

For Digital Video:

If the Digital Video has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.

- During Digital Video playback, press

TITLE button on the remote .The title menu is display.

- Select preferred title by the cursor button and confirmed by press the ENTER button .

For VCD:

Press TITLE/PBC button on the remote control while the disc is playing, you can switch between "PBC ON"and "PBC off" mode.

-26-

Touch Screen Operation

BT Operation

1. Pairing and Connecting Prior to using the BT device named BC-HF-V03 as a hands-free system

for a BT-enabled mobile phone for the first time, you must

connect them

Press the BT hands-free icon or press the pair button on the remote control to turn to BT standby mode as right:

* Prior to pairing and connecting, when displaying No Video interface of radio, CD, AUX IN or BT music, the logo BT fl as he s in t he t ou ch s cr ee n.

as follows:

pair and

* During the use of the BT device named BC-HF-V03” as a hands-free system for a BT- enabled mobile phone; Switch on the BT mode of your mobile phone; then s BT device and enter it; BT device car BC-HF-V03 , select it and enter it; then it will

the name will be displayed

show an interface that asks you to input a password, input 8888 and enter it; then i with the BT device BC-HF-V03 of the car A/V system, Confirm it, then the frame of the BT logo will light all the time.

* finishing pairing and ing or the mobile phone plays music

2. BT PHONE

1) Make a call

(1) Dial with mobile phone directly;

(2)

a. Touch the BT PHO NE i co n in h om e me nu o r to uc h th e ic on d ur in g pl ay in g to turn to BT PHONE interface as follows:

t will pair and connect

When connect , the audio of the mobile phone transfers

to the car audio system whenever a call is made or received

.

Dial with BT Phone, remote control, or on touch scree n;

10: 00AM

CONN ECTED T O IPHON E

When it finds the of the A/V system,

“

elect the item to find a

: Same as MUTE button.

& : Same as VOL+ and VOL- or VOL kno b.

: Tap to do disconnection.

-27-

Touch Screen Operation

b. Use the number icons or buttons to input your desired phone number;

* When inputting a wrong digit, use icon or < button to delete it.

c. After finishing inputting, touch icon or press button on control panel to dial out.

2) Redial last dialed phone number

Touch icon or long press redial button on remote control to dial out the last dialed phone number.

3) Answer a call

During an incoming call, the incoming telephone number displays in the the BT PHONE interface. If you want to receive it, touch icon or press button on remote control; if you want to reject it, touch icon or press button on remote control.

4) Ending a call

When ending a call, touch icon or use button.

5) Switch the audio between the unit and your device

During phone BT hands-free system of the car A/V system, touch icon or press button on remote control to switch the audio between the unit and your device.

6)

Adj us ti ng t he v ol um e du ri ng a c al l

During phone + and - icon or

talking, use VOL kno b or V OL + an d VO L-

; use icon or MUTE button to mute sound

buttons to adjust volume level .

talking using the

* * / # icons and buttons

they perform as * / # buttons on mobile phone.

3 BT M US IC

.

1 Touc h BT MUSIC in home menu or pressing MODE button can pop up BT

)

MUSIC interface as follows:

USE R SWFUSE R SWF

BT

MUS IC

-28-

Touch Screen Operation

Mute function

To select the Equalizer mode

To decrease the volume level

To increase the volume level

Loudness Function

Subwoofer Function

Tur ni ng p re -s wi tc hi ng f or t ra ffic announcements on and off

Switching on and off an Al te rn at ive frequency

Play/Pause the playing

To skip the next track

To skip the previous track

Tap to turn to BT PHO NE m od e. (a ft er pairing and connec ti ng a mobile phone

with BT function).

2 When the play , is

) using your mobile phone with BT f un ct io n to audio/video if i t

paired and connected to the unit,

the audio of the mobile phone will change into .

The BT de vi ce o f th e ca r A/V s ys te m su pp or t A2D P, w hi ch e na bl es t he u se r to stream audio from their device.

3 he device of supports AVRCP,

BT Music interface except BT Mu si c an d th ei r buttons on control panel or on remote control are available for audio/video playback of your mobile phone during playback. But n for / icon and / buttons, and the function of resume playback after pausing or stopping is available only for some mobile phone

* If you don’t want to use the function of the car A/V system ,press SEL button then use VOL kn ob o r VO L+ a nd V OL - bu tt on s switch off .

the car A/V system

) T BT the car A/V system so these icons on the

corresponding

o fast forward/backward functions

.

BT

to display BT, to BT

-29-

Touch Screen Operation

AUX Operation

On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the <Video input > on the back of the unit .) . Use this jack to replay sound of other replay equipment such as Digital Video players, computers, etc. Via the loudspeakers.

1). Please connect the external device with stereo jack (3.5mm)plug the Aux in socket .

AUX IN J ACK FRONT PANEL

AUX IN

Gro und

Rig ht

Lef t

3). You now hear the sound from the external device played back through the loudspeakers .

The function of the icons as follow:

Tap t o mu te t he sound.

AUX INTERFACE 1

AUX INTERFACE 2

2). In radio mode, touch the screen of “ ” ICON to enter the main menu, touch the “ AUX ” ICON to enter the AUX IN mode .

Tap t o se le ct E Q as the same on the remote control.

Loudness Function.

Subwoofer Function.

Tap to adjust audio volume.

Tur ni ng p re -s wi tc hi ng f or t ra ffic announcements on and off.

Switching on and off an Alternative frequency.

Tap to turn to BT PHONE mode. (after pairing an d co nn ecting a mobile

phone with BT funct io n) .

-30-

Touch Screen Operation

AV Operation

Please plug the <Video input > on the back of the unit .

Touch the AV IN i co n to e nt er the AV IN mode.

As the interface show, here is only the audio output, now tap the icon, the picture of the auxiliary input video show on the display and tap the display again to turn to audio mode.

Now you can watch the video from your External video equipment such as Digital Video players, computers, etc.

The function of the icons as follow:

Tap t o mu te t he sound.

Tap t o se le ct EQ as the same on the remote control.

Loudness Function.

Subwoofer Function.

Tap to adjust audio volume.

AV INTERFACE 1

AV INTERFACE 2

Turning pre-switching for traffic

announcements on and off.

Switching on and off an Alternative frequency.

Tap t o tu rn to BT PHONE mode. (After pairing an d co nnecting a mobile

phone with BT functio n) .

Note: To en su re s af et y wh il e driving and to comply with lows, drivers should not watch video or operate the video device while driving.

-31-

Touch Screen Operation

USB OPERATION

Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically.

5

Card OPERATION

The unit can support playback MP3/WMA/ JPEG/MP4 and Divx format which are stored on SD memory cards . Please read the following instructions before you start using a memory card . Inserting the card as follow:

Press REL but to n to detachable the panel

Label sid e facing up wa rd

10:00 AM

5

USB

SON GS ONG

1

2 3 4

001

002002

003

004

005

1 Current type (highlighted bar) .

2 Audio play mode select.

3 Picture play mode select.

4 Movie play mode select,

5 Current play track .

SD

1

MOV E

2 3 4

MOV 03247 .MPG

CIM G3080 .MOV

1 Current type (highlighted bar) .

2 Audio play mode select.

3 Picture play mode select.

4 Movie play mode select,

5 Current play track .

-32-

Touch Screen Operation

STEERING WHEEL CONTROL

Touch the SWC icon as follow to turn to steering wheel control .

Then tap Assign and tap the button 1 and then select the icon as the picture show, the icon show in button 1 position. After selection tap confirm and back to home menu that means select finish.

The function of the icons as follow:

Tou ch to begin function save.

After selection touch to confirm operation.

During setting, touch the icon to turn to home menu.

There are 2 KEY for no more than 12 buttons to select. For first time use this function, input a key (such as 0.38,0.38 is a magnitude of voltage, according to your car ) through the steering remote and show in button 1 position.

0.3 8

Tou ch this icon to cancel the input and resume load.

High-z means high-impedance. Tap t o reduce the magnitude of voltage. This key for avoid that voltage is too high that the car system can not differentiate the input key set for some car.

Low-z means low-impedance. Tap t o in crease the magnitude of voltage. This key for avoid that voltage is too low that the car system can not differentiate the input key set for some car.

-33-

Specification

Gene ral :

Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10 A Signal System: Compositive video 1.0Vp-p 75 Discs Played: (1)DIGITAL-VIDEO Disc 5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc

Audio Signal Output: 2ch&4ch line out

Characteristics: (1)Frequency Response 20 Hz - 20 KHz

(2)S/N Ratio 90 dB (JIS)

(3)Wow and Flutter Below measurable limits

RADIO Section:

For 2 Bands For 2 Bands (Europe) (U.S.A.) FM FM Frequency Coverage: 87.5 to108 MHz 87.5 to107.9 MHz IF: 10.7 MHz 10.7 MHz Sensitivity (S/N = 30 dB): 15 dBu 15dBu MW AM Frequency Coverage: 522 to1620 KHz 530 to1710 KHz IF: 450 KHz 450 KHz Sensitivity (S/N = 20 dB): 40 dBu 40 dBu

TFT Mo nitor:

Monitor Screen Size: 13.3 Inch Wide Color System: NTSC/PAL

TV

TV System NTSC/PAL/SECAM

TV Sensitivity 45dB uV@CH25 in average

BT:

BT specification: V1.2 Class 2

BT profile supported: Headset, Handsfree and A2DP & AVRC P profiles

Range of frequency: 2.4GHz Spectrum

NOTE:

Specifications and design are subject to modification, without notice, due to improvements in technology.

-34-

Troubleshooting

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

SYMP TOM CAUSE SOLUTION

If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC"

Replace the fuse

Remove the disc in the player, then put a new one

Insert the compact disc with the label facing upward

Clean the disc or try to play a new one

Cool off or until the ambient temperature return to normal

Please switch to correct color system from menu

Make proper connection according to w ir e c on ne ct io n “ ”

For safety reasons no video/ images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed.

Please choose a proper color

system.

Change the disc

Change the disc Record JPEG files using a compliant application

Press the RESET button. Front panel is not properly fixed into its place

Insert the antenna cable firmly

Select a station manually

No power

Disc can not be loaded or ejected

Video/image appears black-white

No video/image appears

No color in picture

JPEG disc can not be played back

The operation keys do not work

The radio does not work

The car ignition switch is not on

The fuse is blown

Presence of disc inside the player.

Inserting the disc in reverse direction

The disc is extremely dirty or defective

Temperature inside the car is too high

The color system is set incorrectly

The unit is not connected to the parking brake detection switch

The parking brake is not engaged

The disc format is not according to the TV-set used (PAL/NTSC)

No JPEG files are recorded on the disc.

JPEG files are not recorded in a compliant format

The built-in microcomputer is not operating properly due to noise

The antenna cable is not connected

The signals are too weak