Pyle PLRD-102 Owners manual

10.2 TFT LCD COLOR MONITOR/DVD

Instruction Manual

WWW.PYLEAUDIO.COM

WARNING:
HAZARD DO NOT OPERATE THIS
UNIT UNLESS VEHICLE IS PARKED
IN SAFE AND LEGAL AREA

PLRD102

1. SPECIFICATIONS
TFT-LCD MONITOR

Screen size: 10.2 inch 16:9 TFT
Resolution: 800 (H)x600(V)
Power source : DC12V 20%
Electric current: 1.35A 20%
System: PAL/NTSC
Operation temperature: -10 -55
Storage temperature: -10 -80
Disc zone: multizone
Disc format compatible: MP3, SVCD, VCD, DVD, CD, CD-R, CD-RW,
DVD-RW, DVD-R

ATT ACHMENT

1.MAINTAIN OF LCD
A: Do not press or touch LCD, which may cause distortion or fault.
B: Use soft cloth with a little water clean LCD.
C: Do not use oil, thinner, cleanser or anlistatig.
D: In cold or hot condition, picture may not clear, any new LCD may
has red or blue light point, 99.99% on the LCD should be without
any point but 0.01% point appeared is allowed.

Spare parts list

2 NOTICE
A.Please do not try to repair. The display screen is composed of lots
of precise electronic components. They will be broken or cracked if
disassembled or refitted. If the failure happened, please turn off the
monitor and notify distributors or us.
B. Don t let the display screen incur the pollution like dampness,
dust, steam, lampblack, etc.
C. Please don t use thinner or other chemical cleaner to wipe the
surface of the display screen. The dirt should be wiped off by using
soft cloth.
D. Keep the monitor away from extreme hot and cold locations.
E. Avoid dropping and strong impact.

3.REMINDING:
DO NOT HIT THE SCREEN, PLEASE CONNECT THE ANODE AND
CATHODE OF POWER CORRECTLY.
DANGEROUS HIGH VOLTAGE ARE PRESENT INSIDE
THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.

No inform available if there is any change of specification

Item no description Q ty
1 power, A/V cable 1
2 remote control 1
3 manual 1
4 screws 1 bag
5 5M RCA cable 1

1

14

Attachment

1.maintain of DVD MONITOR
please use normally rotund disc. If you put in an abnormity, not rotund
disc, they will be locked by the player or can not play well.
Make sure the disc before play has no split, scratch or warp.
Do not touch the record surface ( not printed side)
Keep disc in the disc pack after playing;
Do not expose disc under direct sunlight or high temperature;
Do not stick label, write or use chemical on the surface of disc;
If you use central heating in cold weather, you may find dews on the DVD
player, which may make the unit can not work well. Then please cut off
the unit for 1 hour to make it dry and wipe the disc by dry cloth.
Shock may cause the play stop.

2.MAINTAIN OF DISC
A: some functions may not available for certain kinds of DISCS.
B: some discs may not compatible with this unit.
C: this unit can only play DVD-R/DVD-RW disc in video mode, and some
files download from computer can not be read.
D: broken, dirty or wet disc can not be read.
E: some disc recorded by personal may can not be read for the format
of recording.
F: when play MP3 format , adopt special method to playing, because of
the special MP3 format of document storage.
G: should use to choose the file when play MP3 disc,
closed by ENTER.

‰

ˆ

Š

‡

†

3.MAINTAIN OF REMOTE CONTROL
A: Do not expose it in direct sunlight or put in on the instrument board
B: Especially in summer, the high temperature there will make it distorted
C: the unit may can not receive the signal from the remote control
under direct sunlight, move it near to the unit

13

…

1)Power ( control display) 3) MENU

2) - 4) +

5) IR TRANSMIT 6) LCD MONITOR

7) FIX PEDESTAL 8) LAMP BUTTON

9) LEFT LAMP 10) RIGHT LAMP

11) EJECT 12) PLAY/PAUSE

13) BACKWARD 14) FAST FORWARD

15) STOP 16) DVD INDICATOR

17) OPEN

•

2

‚

ƒ

„

Installation

BASIC TROUBLE SHOOTING

Fault reason resolvent

No power

No picture

Remote
useless

Can not play

red wire goes to 12v +;
black one goes to ground

Fuse Blowout

Power line unconnected

no VD input

No dvd signals output

Video lines unconnected

battery protection
paper unload

Aim at wrong direction

No power

bad disc

disc load in mistake way

connect power
correctly

change fuse

connect correctly
to the power

input video

reset dvd

connect video line again

take out the paper

aim at the receiver
window

change battery

change better disc

re-put disc

3.INSTALLATION
Use the 6 pieces of machine screws(4x20BA) , and fix the setting plate to
the place, then assembly the unit of monitor to the setting plate.

3

Distortion

Disc dirty

Fast forward/ backward

12

clean disc

Normally

REMOTE CONTROL FUNCTIONS

1.PDVD: DVD power

2.DISPLAY: show information about disc

3.PBC: when it plays super VCD, VCD2.0, it can

L/R

AUDIO

STEP

MUNE

show menu of the song: song 1, song 2,--- choose
number directly.

4.RESUME: memorial play

5. Inhale / eject disc

6.GOTO: set time

7.L/R: right / left channel

8.PRO-GRAM: edit

RETURN

9.PLAY/PAUSE: press once, it plays or stops play;
press again , it returns.

10.STOP: stop play if press this button

11.1~10: number

12.AUDIO: mode of audio

U/LU/L

POWER

13.STEP: press this button, it will play next picture;
press PLAY, it comes to normally mode.

14.TITLE: back to main page

15.MENU:menu

16. Next song

17. Last song

18. fast forward

19. Fast backward

20.A-B: repeat play start part A to part B by press this button two times
( first press is A and the second is B), press third time, it stops repeat play.

21.RETURN: back to main menu

22.ENTER: confirm

23. : direction

24.SLOW: play slowly

25.ZOOM: zoom the picture with 4 class

26.SETUP: set

27.REPEAT: repeat play

28.VOL-: lower

29.VOL+: louder

30.ANGLE: video angle

31.SUBTITLE

32.MUTE

33.A V

34.U/L: display start up or down way

35.-: reduce

36.SEL: menu

37.+: increase

38.POWER: power of this monitor

WIRING DIAGRAM

FILTER

Audio L out (white)

Video2 out ( yellow)

Audio R out (red)

CAR AUDIO(DVD OR VCD)

Video1 input (yellow)

Audio R in (red)

Audio L in (white)

BATTERY

Wiring diagram
Step 1 : please take out power signal cable from attached bag, long

cable connect the thrum ,as per arrow direction, with screen
signal thrum insert it correctly
Step 2: connect the power correctly, red cable is anode , black cable
is cathode
Setp 3: signal cable ( 1 way) is video input,one of red cable and white cable
are left and right audio input, others are left and right output.
( please see the tag )

11

4

FUNCTIONS

1)Brightness
Enter into MENU, use + - buttons to adjust the picture sb rightness,
can adjust the range in 0~100. attached is the main menu.

NTSC N720x240
Brightness

Contrast
Hue
Saturation
Language
Volume
Exit

Select

2) Contrast
Enter into MENU, use + - buttons to adjust the picture s
contrast . Can adjust the range in 0~100.attached is the main menu.

NTSC N720x240
Brightness

Contrast
Hue
Saturation
Language
Volume
Exit

Select

AUDIO SETUP

AUDIO SETUP

AUDIO SETUP

AUDIO OUT LT/RT

AUDIO OUT

DOWN MIX

DOWN MIX

STEREO

STEREO

DYNAMIC RANGE VSS
DOWN SAMPLE OFF

EXIT SETUP

AUDIO SETUP

AUDIO SETUP

AUDIO OUT

AUDIO OUT

DOWN MIX

DOWN MIX

DYNAMIC RANGE

DYNAMIC RANGE

DOWN SAMPLE

48K

AUDIO OUT

AUDIO OUT FULL

DOWN MIX 6/8

DOWN MIX 6/8

DYNAMIC RANGE

DYNAMIC RANGE

DOWN SAMPLE 2/8
EXIT SETUP

AUDIO OUT

AUDIO OUT

DOWN MIX

DOWN MIX

DYNAMIC RANGE

DYNAMIC RANGE

DOWN SAMPLE

DOWN SAMPLE

AUDIO SETUP

AUDIO SETUP

AUDIO SETUP

96K

EXIT SETUP 192K

EXIT SETUP

NOTICE:
A: Should use to set and ENTER to confirm your set.
B: do not change preset if unnecessary
C: if this set compatible with PAL and NTSC, it would be better

choose NTSC
D: Original password is 0000
E: part of the functions are available only under certain condition,

while some are not available right now.

4/8
OFF

3) Hue
Enter into MENU, use + - buttons to adjust the picture s h ue.
can adjust the range in 0~100. this function apply to the NTSC system
only . normally, adjust the range of hug in 50.attached is the main menu.

NTSC N720x240
Brightness

Contrast
Hue
Saturation
Language
Volume
Exit

Select

5

Playing edit
if there are two tiles or songs above in the disc, use PRO-GRAM
button to set the order, it will show 1[--],2[--]---on the picture, so
press the number to edit the order, then you can use and
ENTER to play.

10

B: language setting
Press SETUP to set up the language , attached is the main menu and sub menu:

LANGUAGE SETUP

LANGUAGE SETUP

LANGUAGE SETUP

4)saturation
Enter into MENU, use + - buttons to adjust the picture s saturation.
can adjust the range in 0~100.attached is the main menu.

OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG

EXIT SETUP

LANGUAGE SETUP

OSD LANGUAGE CHINESE

AUDIO LANG

ENGLISH
SUBTITLE LANG JAPAN
MENU LANG FRENCH
SPANISH
EXIT SETUP PORTUGUESE
LATIN
GERMAN

LANGUAGE SETUP

LANGUAGE SETUP

OSD LANGUAGE CHINESE
AUDIO LANG ENGLISH
SUBTITLE LANG JAPAN

MENU LANG

SUBTITLE LANG

FRENCH
SPANISH
EXIT SETUP PORTUGUESE
GERMAN
LATIN

OSD LANGUAGE ENGLISH

AUDIO LANG CHINESE
SUBTITLE LANG GERMAN
MENU LANG SPANISH
FRENCH
EXIT SETUP PORTUGUESE
ITALIAN
JAPAN

LANGUAGE SETUP

LANGUAGE SETUP

OSD LANGUAGE CHINESE
AUDIO LANG ENGLISH

SUBTITLE LANG

SUBTITLE LANG

JAPAN
MENU LANG FRENCH
SPANISH
EXIT SETUP PORTUGUESE
GERMAN
OFF

LANGUAGE SETUP

LANGUAGE SETUP

OSD LANGUAGE
AUDIO LANG

SUBTITLE LANG

SUBTITLE LANG
MENU LANG

EXIT SETUP

EXIT SETUP

NTSC N720x240

Exit

-

Saturation

+ 50

Brightness
Contrast
Hue
Saturation
Language
Volume
Exit

Select

5)Language
Enter into MENU, use + - buttons to adjust the picture s language.
Can adjust the range in 0---100.attached is the main menu.

NTSC N720x240
Brightness

Contrast
Hue
Saturation
Language
Volume
Exit

Select

Language
English

Deutsch
Franis
Espanol
I tal iano
Slimplified Chinese
Traditional Chinese

6)V olume
N/A

C: audio setting
Press SETUP to set up the audio, attached is the main menu and sub menu:

AUDIO SETUPAUDIO SETUP

AUDIO OUT
DOWN MIX
DYNAMIC RANGE
DOWN SAMPLE

EXIT

AUDIO OUTAUDIO OUT

SPDIF/OFF
DOWN MIX SPDIF/RAW
DYNAMIC RANGE SPDIF/PCM
DOWN SAMPLE

EXIT

9

NTSC N720x240
Brightness

Contrast
Hue
Saturation
Language
Volume
Exit

Select

Volume

+ 50

Exit

6

7)Exit
Enter into MENU, use + - buttons to adjust the exit

NTSC N720*240
Brightness

Contrast
Hue
Saturation
Language
Volume
Exit

Select

9) DVD TITLE
Turn to DVD title by press TITLE on the remote control.

10) DVD SETTING
A: normally setting
press SETUP to preset DVD , Attached is the main menu and sub menu.

SYSTEM SETUP

TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEF AUL T

SYSTEM SETUP

NTSC

SCREEN SAVER PAL 60
TV TYPE PAL
PASSWORD AUTO
RATING
DEF AUL T

NTSC TV SYSTE

DVD FUNCTIONS

1). DVD PLAYER
DVD reading indication light will gleam when loading DVD DISC; and
then when disc is reading the light turns to be shining.

2) PAUSE
press when playing , it will pause playing for you to see inactive
picture.
Press it again, it will go on playing.

3)STOP
Press it will stop playing

4)FAST FORWARD / BACKWARD
press to fast forward and backward when playing DVD, while
press to go on playing.

5)LAST/NEXT
press to chose last or next song by remote control.

6)TURN TO APPOINTED MENU OR TIME
press GOTO one time, will show following picture:

01/02 /001 001 00:00:00

Title Time

present title total title present song total songs

EXIT SETUP

SYSTEM SETUP

TV SYSTE
SCREEN SAVER
TV TYPE 5MIN
PASSWORD 10MIN
RATING 30MIN
DEF AUL T OFF

EXIT SETUP

SYSTEM SETUP

TV SYSTE
SCREEN SAVER
TV TYPE
PASSWORD - - - -
RATING
DEF AUL T

EXIT SET UP

SYSTEM SETUP

1MIN

1MIN

EXIT SETUP

SYSTEM SETUP

TV SYSTE
SCREEN SAVER
TV TYPE 4:3PS
PASSWORD 4:3LB
RATING 16:9
DEF AUL T

EXIT SET UP

SYSTEM SETUP

TV SYSTE
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEF AUL T KID SAFE
VIEW ALL
EXIT SETUP

SYSTEM SETUP

NO ADUL T

press on the remote control to present song, then input the number
of the song or the time you want closed by ENTER, If the number is 10
above, press 10 and then the number.

7)DVD INFO
Press DISPLAY on the remote control to display DVD information .

8)DVD player menu
Press MENU on the remote control to turn into DVD menu, as per
play menu, enter into number to choice the program.

7

TV SYSTE
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEF AUL T

EXIT SETUP

RESTORE

RESTORE

TV SYSTE
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEF AUL T

EXIT SETUP

8