Pyle PLPTS2X2 User guide

PLPTS2X2

Universal Device Stand

Height Adjustable Tripod Mount For Laptop,

Notebook, Mixer, DJ Equipment, (Pair)

2 Device Resting Plate 2 Extension Arm 2 Folding Tripod Base 8 Washers

4 Mounting Clamps 8 Wing Nuts 8 Plate Bolts

Slide the metal mounting clamps onto both ends of the

extension arm. Each side is tted with rubber grips that the

clamps use for holding support. Be sure as to, at least partially,

slide the metal mounting clamps to lay over the rubber grips.

Use the dual clamp-style knobs on both sides on each of

the mounting clamps to secure the angle and placement of

the device resting plate.

Use the included hardware to secure the device resting

plate with the metal mounting clamps. The holes in the

mounting clamp brackets should align with the holes

protruding through the base plate. Be sure to use a washer

between the wing nut and the metal mounting clamp

when securing.

www.PyleUSA.com

2

The plate bolts are to be inserted from the top of the unit,

going downward through the device resting plate, and out

of the other end to meet the metal mounting brackets.

The metal mounting bracket clamps can be adjusted or

loosened accordingly to allow for angle/tilt adjustment.

Slide the assembled extension arm and device resting plate
into the assembled folding tripod base with the inserted
extension arm tting insert. The top clamp style knob allow
for height adjustment by raising or lowering the unit's
extension arm. The lower clamp style knob allows for securing
the stand's stability when the tripod legs are extended.
The unit also features a safety pin that acts as a backup for
the stand's height adjustment safety.

Features:

• Universal Device Stand

• Quick & Easy Setup

• Tripod Floor-Standing Design

• Lightweight, Portable & Reliable

• Quick & Convenient Height Adjustment

• Angle Adjustable Device Tray

• Rugged & Durable Metal Construction

• Disassembles for Travel & Storage

• Works with Audio/Video Devices, DJ Sound Equipment
(Laptops, Notebooks, Mixers, Ampliers, etc.)

• Used by Musicians, DJs, Performers, Engineers, etc.

• For On-Stage or In-Studio Use

What's in the Box:

• (2) Universal Device Stand

Technical Specs:

• *Some Assembly Required

• Height Adjustable: 22.0'' - 35.0'' -inches

• Construction Material: Metal Stand, Engineered ABS Shelf

• Shelf / Device Tray Size (L x W): 14.0'' x 11.0'' -inches

This products can expose you to a chemical or group of checmicals, which
may include ”Lead And Cadmium” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.

www.PyleUSA.com

3

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]