Page 1
Page 2
Thank you for making a marine your choice for audio entertainment!
It’s compact, waterproof design allows for flexible mounting possibilities, and
makes it simple to expand the audio system capabilities for vehicle.
PLMRMBT5B / PLMRMBT5S
Features:
● 2 x 150 Watts RMS @ 4 Ohm’s
● 2 x 300 Watts MAX @ 4 Ohm’s
● 2 x 500 Watts RMS @ 2 Ohm’s
● Electronic Crossover Network
● 2 Ohm Stereo Stable
● Anti-Thump Turn- On
● Soft Turn On / Off
● Adjustable High / Low Level Inputs
● RCA Line Low Level Input
● Power Protection Circuitry
● Marine Grade Bluetooth Flush Mounted Controller
● S/N Ratio: > 95 dB
● @10w Output Power/T.H.D: 0.13%
● Channel Separation: > 65 dB
● Frequency Response: 10-40K Hz
● Fuse: 10 A
● Dimensions: 5.51”(L) x 3.54” (W) x 1.97”(H)
Accessories:
●
iPhone / Android Phone / Waterproof 3.5mm Stereo to RCA Adaptor
●
Set of DC 12 Volt Connection Cables Included
●
Sold as: Unit
1
Page 3
PLMRMBT7B / PLMRMBT7S
● 4 x 150 Watts RMS @ 4 Ohm’s
● 4 x 300 Watts MAX @ 4 Ohm’s
● 4 x 500 Watts MAX @ 4 Ohm’s
● Electronic Crossover Network
● 2 Ohm Stereo Stable
● Anti-Thump Turn-On
● Soft Turn On / Off
● Adjustable High & Low Level Inputs
● RCA Line Low Level Input
● Power Protection Circuitry
● Marine Grade Bluetooth Flush Mounted Controller
● S/N Ratio: > 95 dB
● @10w Output Power/T.H.D: 0.13%
● Channel Separation: > 65 dB
● Frequency Response: 10 – 40K Hz
● Fuse: 15 A
● Dimensions: 6.30”(L) x 3.54” (W) x 1.97”(H)
Accessories:
● iPhone / Android Phone / Waterproof 3.5mm Stereo to RCA Adaptor
● Set of DC 12 Volt Connection Cables Included
●
Sold as: Unit
What is included?
When first unpacking your new marine amplifier, Please check
first that the package contains all of the items below. If something
is missing, contact the store where you purchased the product.
One Piece 2 Channel Marine Power Amplifier
One Piece iPhone / Android Phone Waterproof 3.5mm Stereo
One Piece Marine Grade Bluetooth Flush Mounted Controller
2
PLMRMBT5B / PLMRMBT5S
PLMRMBT7B / PLMRMBT7S
to RCA Adaptor
One Piece 4 Channel Marine Power Amplifier
One Piece iPhone / Android Phone Waterproof 3.5mm Stereo
One Piece Marine Grade Bluetooth Flush Mounted Controller
to RCA Adaptor
Features:
Page 4
3
Don’t misuse the level control!
Do not mistake the input level control for a volume control! It is designed
ONLY to match the output level of your audio source to the input level of
your amplifier.
Do not adjust this input level to maximum unless your input level requires it.
Ignoring these instructions will result in an input overload to the amplifier,
and excessive audio distortion. It can also cause the protection circuit to
engage.
Before making or breaking power connections in your system, disconnect the
marine vessel battery.
Confirm that your head
unit or other equipment is turned
off while connecting the input jacks and speaker terminals.
If you need to replace the power fuse, replace it only with a fuse identical to that
supplied with the amplifier, Using a fuse of a different type or rating may result
in damage to your audio syst
em or your amplifier which is not covered by the
manufacturer’s warranty
Installation precautions
Before you drill or cut any holes, investigate your vessel’s layout very carefully.
Take special care when you work near the gas tank, fuel lines, hydraulic lines
and electrical wiring.
Never operate the amplifier when it is unmouned. Attach all audio system
components securely to prevent damage, especially in an accident.
Do not mount this amplifier when
wire connections are unprotected. in a
pinched condition, in contact with any metal surfaces in your marine vessel,
or likely to be damaged by nearby objects.
Page 5
Controls, Input and Output Cables:
The switches and gain settings are located behind a watertight plug, which
also lights up when the amplifier is on. Be sure to replace the plug when
finished with adjustments
1
2
3
4
The INPUT LEVEL switch selects the input sensitivity of the amplifier. If
you are connecting to a LINE level source (typically any RCA type
connection) then the switch should be in the LINE (out) position. When
connecting to loudspeaker outputs or headphone or high level sources
then set the switch to the SPEAKER (in) position.
The POLARITY switch allows the user to optimize bass performance in
the case that there are more than 1 set of loudspeakers producing bass
in the system. Play some music with strong bass content and listen with
the switch alternately in the NORMAL and REVERSE position until it can
be determined with setting results in more pleasing bass response. If
in doubt, or if any interaction with other speakers is unlikely, then leave
the switch in the NORMAL position.
The GAIN control adjusts the overall level of the amplifier. When using
the amplifier without volume control the level should beset to achieve a
balance with other loudspeakers in the system. As a rule, keep the gain
setting as low as possible while still insuring that thesystem will reach
full output power. When using the system with external volume control,
set the external Volume Control to FULL (clockwise) and adjust the gain
on the amplifier until full output power is reached. Full output power level
can be determined by turning the gain control clockwise until the actual
volume does not increase any more.
dB GAIN
MIN
MAX
+
SPEAKER
LINE
NORMAL
REVERS E
GAIN
2 3 415
Page 6
INPUT Stereo RCA audio input for connecting other audio devices
BLUETOOTH CONTROL Plug for the Marine Grade Bluetooth Flush
Mounted Controller. When installed, this control will turn off the Amplifier
when turned all the way down.
4
5
5
Power and Speaker Wiring
Y
4-8 ohm speakers
wire color
Description
Red
Black
Blue
White
White/Black
Gray
Gray/Black
Battery (+), 12dc
Battery (-), Ground
Remote Turn On, 12vdc = ON
CH1 (+)
CH1 (-)
CH2 (+)
CH2 (-)
+
-
+
-
WHITE
GRAY
GRAY/BLACK
WHITE/BLACK
Accessory switch
BATTERY
-
+
BLUEBLACK
RED
Two Channel Marine Power Amplifier
Page 7
6
Power and Speaker Wiring
wire color
Description
Red
Black
Blue
White
White/Black
Gray
Gray/Black
Battery (+), 12dc
Battery (-), Ground
Remote Turn On, 12vdc = ON
CH1 (+)
CH1 (-)
CH2 (+)
CH2 (-)
Green
Green/Black
Purple
Purple/Black
CH3 (+)
CH3 (-)
CH4 (+)
CH4 (-)
+
-
+
-
+
-
+
-
WHITE
WHITE/BLACK
GRAY
GRAY/BLACK
GREEN
PURPLE
PURPLE/BLACK
GREEN/BLACK
BATTERY
-
+
BLACK
RED
Accessory switch
BLUE
4-8 ohm speakers
Four Channel Marine Power Amplifier
Page 8
Bluetooth Pairing and Connection:
1. Connect Bluetooth controller box to your device
2. Press and Hold for three seconds until power indicator lights (red)
3. The system will automatically go into pairing mode
The power indicator will turn red for about 7 seconds and then
alternating red and blue (Bluetooth blue Power red)
Please be sure that Bluetooth is turned on your device Select PLMRMB
Audio on your device to connect Bluetooth controller (if the
4. When the device is out of Bluetooth range, Bluetooth will be
disconnected automatically and automatically reconnect when
det
ected in range again. (If not please just repeat steps 1 and 2)
5.
When Bluetooth is disconnected or the 3.5mm AUX Input is
plugged in, the p
ower indicator will glow red.
Playing Music:
1. Press to start or pause the music
2. Press shortly for next track
3. Press shortly for previous track
4. Press VOL+ shortly for volume up
5. Press VOL- shortly for volume down
PLMRMBTxx
VOL
VOL
Play / Pause
Press Hold = On/Off
Previous Song
Volume Down
Next Song
Volume Up
Loading...