Pyle PLMRBT33CR, PLMRBT33WT User guide

PLMRBT33WT - PLMRBT33BK - PLMRBT33CR

3.5’’ 2 Pcs. Waterproof Rated Off-Road Speakers

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]

Compact PowerSport Vehicle Speaker System

for Motorcycle or Car with RGB Lights and Remote Control

Features:

• Motorcycle Box Waterproof Stereo System

• 3.5” Long Excursion Woofer

• Completely Waterproof

• Wireless BT Music Streaming

• Compact & High-Powered Output

• Marine Grade Waterproof Rated Construction

• Weatherproof & Water-Resistant Housing

• Full Range Stereo Sound Reproduction

• Impressive Bass Response

• Sleek Design, Machine Molded Speaker Cabinet Housing

• Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage

• Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft

• Quick Butt Connector for Speaker Wiring

Mounting Bracket

Mounting screws

Two types of mounting screws are provided to
accomodate most mounting pole diameters.

360° Rotation Function

1. Loosen the rotation adjustment screw.

2. Rotate the lower mounting bracket to the desired position.

3. Lock the rotation adjustment screw.

Min: 0.83in/21mm Max: 1.57in/40mm

www.PyleUSA.com

2

For diameters ranging

from 0.83 to 1.57 inches,

use the 35mm srews.

www.PyleUSA.com

3

Remote Control

1. Turn ON/Standby:

Press this key to turn ON unit or switch to

stand by mode. At power ON, unit will

automaticly turn ON and restore to

previous status.

2/9. Dynamic Mode Adjust:

Switch to dynamic mode from static

color, or switch between dynamic modes.

• 22 Dynamic Modes

• Card Type RF Remote

• 20 Static Colors

• Ultra Slim Design

• Very Smooth Eects

• Dynamic Demo Mode

• Speed Adjustable

• Easy Remote Pairing

• Brightness Adjustable

• Direct Color Select

3/10. Dynamic Speed Adjust:

Adjust dynamic playing speed Press

SPEED + to increase speed and press

SPEED - to decrease Unit will switch to

dynamic mode if press this key at static

cotor mode.

4/5. Static Color Adjust:

Switch to static color mode from dynamic mode, or switch between static colors.

6. Direct Color Select:

Shortcut key to static colors. When press the specic color key, LED will play the
same static color. The direct colors are included in 'COLOR +'
and 'COLOR-' operation.

7/8. Brightness Adjust:
Adjust static color brightness. Press BRIGHT + to increase brightness and press
BRIGHT - to decrease Unit will switch to static color mode If press this key at

dynamic mode.

Installation Guide

1. Speaker and RGB power + (red), (DC12V)

2. Speaker and RGB power - (black), (DC12V)

3. Connect to each other (Speaker and RGB wires)

11. Demo Mode:

Press this key will switch to Demo mode. At demo mode, it plays 17 dynamic
modes in loop, each mode repeat 3 times.

www.PyleUSA.com

2

www.PyleUSA.com

3