Pyle PLMRBT20 User guide

Page 1
PLMRBT20
Amplified Wireless BT Audio Controller
Waterproof-Rated Marine Receiver Remote Control
for Car , Truck, Boat, 4x4, PowerSport V ehicles
(300 Watt)
Page 2
WIRE DIAGRAM
DC12V(-) Grounded to metal chassis.
USB
BLACK
DC12V(+)
Recommended wiring with fuse (parts are not included)
Line out-L Line out-R
Fuse:15A
YELLOW
AUX Input
BLUE
REMOTE
RED ACC
WHITE
WHITE/BLACK
GRAY
GRAY/BLACK
GREEN
GREEN/BLACK
PURPLE
PURPLE/BLACK
4 OHM
SPEAKERS
Wire Color
Yellow Black Red Blue White White/Black
Description
Battery (+), 12dc Battery (-), Ground ACC REMOTE CH1 (+) CH1 (-)
Wire Color
Gray Gray/Black Green Green/Black Purple Purple/Black
Description
CH2 (+) CH2 (-) CH3 (+) CH3 (-) CH4 (+) CH4 (-)
WIRELESS BT PAIRING AND CONNECTION
Power: Press and hold the power button to power ON/OFF.
your BT-enabled device. The light will turn blue and blinks while waiting for BT connection. b. The PLMRBT20 BT Network Name will appear as "PyleUSA" (No password is required for connecting).
c. When the BT is connected, the light will turn blue and stops blinking. d. Input mode indicator: Blue light for BT, red light for AUX In, and
purple light for USB.
www.PyleUSA.com
2
Page 3
AUX-IN
Short press to switch BT mode/Aux-in /USB mode.
AUTO RECONNECTION
a. When the device is out of the BT range, BT will be disconnected
automatically, the light turns blue while blinking.
b. BT will automatically reconnect when detected in range again in
10 minutes.
c. Disconnected BT after 10 minutes, you need to process BT
connection steps (above) to reconnect BT again.
d. If the other device occupied the BT during this period (10mins),
you need to process BT connection steps (above).
e. If there is no connection during this period (10mins), it will turn to
standby mode.
PLAYING MUSIC
1. Press and hold for 3 seconds to Power ON or OFF.
2. Short press to play music or pause.
3. Short press to switch BT mode/Aux-in /USB mode.
4. Short press for next track, press and hold for volume up.
5. Short press for previous track, press and hold for volume
down.
6. Press and hold to disconnect BT.
Short Press
Previous Song
Press and Hold
Volume Down
Play / Pause
BT/AUX/ USB Switch
Short Press Next Song
Press and Hold Volume Up
Disconnect Wireless BT
www.PyleUSA.com
3
Page 4
INSTALLATION (SEAMLESS FLUSH MOUNT)
Size:
96mm/3.8’’ (Out Diameter)
76mm/3.0’’ (Cutout Diameter)
93mm/3.7’’ (Depth)
FEATURES:
Universal Mount Wireless BT Streaming Control Unit
Built-in Wireless BT Audio Receiver
Waterproof-Rated Marine Grade Construction
Water-Resistant & Weatherproof Design
4-Channel Amplier Style
Connect & Stream Audio from Additional External Devices
Aux (3.5mm) Input connector Jack /USB Port
Full Range Stereo Sound Reproduction
Integrated Power Wiring Harness
Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/Full-Range
Amplier
Flush Mount Mounting Kit Included
Universal Vehicle Mounting
Can be In-Console Flush Mount
Anti-Thump Turn-On
Soft Turn On / O
Overload & Power Protection Circuitry
Used for Car, Truck, ATV, UTV, 4x4, Boat, Marine Watercraft,
Power Sport Vehicles
USB Charging (2A)
www.PyleUSA.com
4
Page 5
WIRELESS BT MUSIC STREAMING:
Simple & Hassle-Free Pairing
Instant Wireless Audio Streaming Receiver
Works with All of Today’s Latest Devices Smartphones, Tablets,
Laptops, Computers, etc.
Wireless BT Version: 5.0
Wireless BT Network Name: ‘PyleUSA’
Wireless Range: 30’+ ft.
WHAT’S IN THE BOX:
Wireless BT Control Unit
Audio Connection Cable, 3.5mm
TECHNICAL SPECS:
Power Output: 300 Watt MAX
4 x 35 Watts RMS @ 4 Ohm
4 x 75 Watts MAX @ 4 Ohm
Marine Grade Waterproof Rating: IP-65
Amplier Type: Class-D
T.H.D: 0.1%
S/N Ratio: > 95 dB
Channel Separation: > 65 dB
Frequency Response: 10 - 40kHz
Fuse: 15A
Cut-Out Diameter: 3’’ –inches
Mounting Depth: 3.7’’ –inches
Power: DC 12V
Total Unit Dimensions (L x W x H):
3.8’’ x 3.8’’ x 4.17’’ –inches (Flush Mount)
www.PyleUSA.com
5
Page 6
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Loading...