Page 1
PLMP3C1
FM Transmitter w/ 1.4” TFT Screen,
USB/SD/MMC/MP3/iPod Inputs
Instruction Manual
KEY FEATURES:
• LCD Display Screen
• Built in Wireless FM Transmitter 206 Channel Freq Capable (87.5~108Mhz)
• USB/SD Card Compatible
• 3.5 Aux Input Adaptor for IPOD, normal Mp3/4….
• Fully Adjust a ble Arm for Multi A ngl e Viewing
• Wireless Full Function Remote Control
• Cigarette Lighter DC 12 Volt Compatible
Page 2
USING THE FM TRANSMITTER:
Insert this FM transmitter into your vehicle’s cigarette lighter or power port
Tune to your radio to a desired FM frequency, then match that same frequency on to the player by
using the buttons on the unit or on the remote control.
Plug USB disk or SD card into this product, It will play and tr ansmi t the Mp3 files automatic. (You have
to copy the MP3 files into the USB disk or SD card in advance.)
This product support other devices: normal mp3/4, CD… Using the 2.5mm to 3.5mm audio cable
provided. Plug one jack into this transmitter, The other end into normal Mp3/4,CD… It will play
and transmit the songs from the MP3/4.CD. And in this state. All functions will now need to be
controlled on the device, not this transmitter or its Remote Control. Enjoy!
How to adjust the screen brightness:
Long press “CH” button for about 4 seconds.
Short press “
Short press “
” button continuously to turn up the screen brightness;
” button continuously to turn down the screen brightness.
Page 3
QUICK GUIDE:
Operation Guide FM transmitter Remote Controller
1.How to play and stop
the music
2.How to adjust the
Volume
3.How to change the
frequency
4.How to choose music
Press “PLAY” Button : Play the music
Second Press “PLAY” Button: Stop
Long Press “
Long press “
Press “CH” button first, then
press “
Press ”
Short Press “
Short Press “
” button :Increase the Volume；
” Button :Decrease the Volume
”: increase the frequency
”: decrease the frequency
”Button: Play the next song;
” Button: Play the previous song;
Press PLAY/PAUSE
Button
Press “VOL+”” Increase
the Volume；Press
“VOL-”” reduce the
Volume；
Press “CH+” button:
Increase 0.1MHZ
Press “CH-” button:
reduce 0.1MHZ
Or press the number of
the frequency what you
desired,press”CH+”again
to confirm
Press “NEXT”Button:
Play the next song;
Press “PREV” Button:
Play the previous song;
Or press the serial
number of the song
directly
5.How to set EQ Nonsupport
6.How to change loop
mode
7.How to switch folder Nonsupport
Long press “play/pause” button, four loop
modes optional: folder, single, rando m, all
Press “EQ” button to
switch your favorite EQ
Press “
Press “folder+” or “folder
-”
”button
Loading...