Pyle PLMD-7 Owners manual

WIRING CONNECTION
To DVD player
RCA Line Output
R
White
Red
PLMD7
7Channel FM Stereo
Transmitter
RED
BLACK
BLACK
GROUND
GROUND
O
N
1
2
3
4
R
Wor.2
RED
On
Off
PLMD7
Installation
Car Antenna
FM TRANSMITTER
FCCID:RJX93FMT07
This device complies 15 the rules
INSTRUCTION MANUAL
PLL FM Stereo Transmitter
INTERFERENCE ON 87.7MHz:
If interference experienced is on 87.7MHz,change the position of the
If interference experienced is on 87.7MHz,change the position of the
frequency select switch in the face of the FM Stereo transmitter and
frequency select switch in the face of the FM Stereo transmitter and
tune the radio 87.7-88.9MHz.
tune the radio 87.7-88.9MHz.
BEFORE INSTALLING THE TRANSMITTER
Do not install the unit in the following locations.
Do not install the unit in the following locations.
Locations exposed to direct sunlight.
Locations exposed to direct sunlight.
Where hot air is discharged from the car heater.
Where hot air is discharged from the car heater.
In areas subject to extreme temperatures.
In areas subject to extreme temperatures.
INSTALLATION
The FM Stereo Transmitter must be mounted within 24inches of your radio so
The FM Stereo Transmitter must be mounted within 24inches of your radio so
that its power cable can reach the radio power antenna lead.
that its power cable can reach the radio power antenna lead.
The FM Station Frequency Selector Switch is located in the face and you may
The FM Station Frequency Selector Switch is located in the face and you may
wish to change it after your initial checkout or somtime in the future.
wish to change it after your initial checkout or somtime in the future.
FM RADIO FREQUENCY PRESET
The FM Stereo Transmitter can operate on from 87.7MHz to 88.9MHz.
The FM Stereo Transmitter can operate on from 87.7MHz to 88.9MHz.
(7channel-200KHz Step)
(7channel-200KHz Step)
The Frequency Selector Slide Switch is on one channel of the Transmitter
The Frequency Selector Slide Switch is on one channel of the Transmitter
and was set 87.7MHz at the factory. Assuming it is still there, turn on the car
and was set 87.7MHz at the factory. Assuming it is still there, turn on the car
stereo and select FM band operation.Tune the radio to 87.7MHz ( depending
stereo and select FM band operation.Tune the radio to 87.7MHz ( depending
on frequency to which the installer has set the unit),or push the pre-set memory
on frequency to which the installer has set the unit),or push the pre-set memory
button.
button.
FREQUENCY SELECTOR SWITCH
Frequency(MHz)
1234
Frequency(MHz)
87.7MHz
87.7MHz
87.9MHz
87.9MHz
88.1MHz
88.1MHz
88.3MHz
88.3MHz
88.5MHz
88.5MHz
88.7MHz
88.7MHz
88.9MHz
88.9MHz
SPECIFICATIONS:
Frequency: 87.7MHz to 88.9MHz(7channel-200KHz Step)
Frequency: 87.7MHz to 88.9MHz(7channel-200KHz Step)
RF Output Level: 60dB Max
RF Output Level: 60dB Max
S/N Ratio: 65dB
S/N Ratio: 65dB
Stereo Separation: 40dB
Stereo Separation: 40dB
FM Modulation Depth: 75KHz at L+R+Pilot
FM Modulation Depth: 75KHz at L+R+Pilot
Operating Voltage: 10 V~16VDC
Operating Voltage: 10 V~16VDC
Dimensions: 44R 23Hmm
Dimensions: 44R 23Hmm
W eight: 123g
W eight: 123g
Specifications and design are subject to change without noticeSpecifications and design are subject to change without notice
Loading...