Pyle PLE550BS User guide

Page 1
Page 2
Please take a few minute to read the instruction manual and operating
instructions. This will tell you how to use the receiver system. Here, you will
nd unit features and operation instructions to ensure trouble free use and
installation. Please retain these operating instructions for future reference.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK. DON'T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
THIS DEVISE IS INTENDED FOR CONTINUOUS OPERATION!
*Designs and specications are subject to change without notice.
*Cautlon: Please use 4 Ω speakers.
BEFORE USE
1. Ensure that the power line voltage is AC 110V/220V
If you are not sure of the type of power supplied to your home, consult your
2. Protect the Power Cord
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
3. Do not block any ventilation openings.
Blocking up the vents will make the temperature
in the unit become higher and will damage the
unit.
www.PyleUSA.com2
Page 3
4. Avoid water dust and moisture
Do not place objects lled with liquids, such as
vases, on the unit.
5. Do not place in low temperature
Ensure the ambient temperature is greater
than 41ºF.
6. Install this sound system in a well ventilated,
cool, dry, clean place.
Do not install this unit in a poorly ventilated
area, or in locations exposed to high humidity
or direct sunlight (or strong articial light).
7. Avoid tiny metals to fall inside the unit
To prevent short circuit avoid tiny metals
(ex. pins, coins, needle) to fall inside the unit.
8. DO NOT OPEN THE UNIT as this might result
in damage to the circuitry or electrical shock.
If a foreign object should get into the unit,
contact your dealer or service company.
9. Avoid cleaning with volatile solution
Do not attempt to clean the unit with chemical
solvents as this might damage the nish.
Use a clean, dry or slightly damp cloth.
www.PyleUSA.com 3
Page 4
PLE550BS CONTROLS & FUNCTIONS
5 Bands Graphic Equalizer with SUB Volume Adjustable for Subwoofer Channel
1. FADER CONTROL
This control adjusts the volume between the front and rear speakers in 4 speaker system.
2. VOLUME CONTROL
This control adjusts the output level.
3. SUBWOOFER VOLUME
This control adjusts output level of subwoofer.
PLE550BS WIRING DIAGRAM
4. SUBWOOFER FREQ
This switch selects subwoofer frequency 43 or 63Hz.
5. INPUT SELECTOR SWITCH
This switch selects the BT input or CD input.
6. PREAMP CONTROLS
Control the frequency response of the Booster or cut, with the ve tone controls each 45Hz, 100Hz, 700Hz, 2KHz, 15KHz.
www.PyleUSA.com4
Page 5
PLE770BS CONTROLS & FUNCTIONS
5 Bands Graphic Equalizer with SUB Volume Adjustable for Subwoofer Channel
1. FADER CONTROL
This control adjusts the volume between the front and rear speakers in 4 speaker system.
2. VOLUME CONTROL
This control adjusts the output level.
3. SUBWOOFER VOLUME
This control adjusts output level of subwoofer.
PLE770BS WIRING DIAGRAM
4. SUBWOOFER FREQ
This switch selects subwoofer frequency 43 or 63Hz.
5. INPUT SELECTOR SWITCH
This switch selects the BT input or CD input.
6. PREAMP CONTROLS
Control the frequency response of the Booster or cut, with the ve tone controls each 63Hz,125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz,12KHz.
www.PyleUSA.com 5
Page 6
PLE550BS
Features:
Five Equalization Bands
Tone Adjustable From -12DB To +12DB
Low Pass Filter With Selectable Frequency Control
Built-in BT for Wireless Music Streaming
Blue LED Indicator for BT
Two Stereo RCA Output
Auxiliary Stereo RCA Inputs
Input Selector
Master System Volume
Fader Function for Front & Rear Channel
SUB Volume Adjustable for Subwoofer Channel
Mounting Hardware Included
RCA Auxiliary Input (Rear) inputs for MP3, DVD, or Phone
What’s in the box:
Equalizer
Screw
Bracket
Power Plug
Technical Specs:
Low Bass Equalizer Frequency: 45Hz
Bass Equalizer Frequency: 100Hz
Mid-Bass Equalizer Frequency: 700Hz
Mid Equalizer Frequency: 2 KHz
High Equalizer Frequency: 15 KHz
Each Frequency Adjustable: -12dB to +12dB
Output Voltage: 5V RMS @ 0.05% THD
Voltage: 11V-14.5V
S/N Ratio: 100dB
Separation: > 60dB
Frequency Response:20Hz~ 25 KHz
Subwoofer Frequency: 40Hz / 150Hz
Product Dimensions: 7'' x 4.72''x 1.18'' -inches
www.PyleUSA.com6
Page 7
PLE770BS
Features:
Seven Equalization Bands
Tone Adjustable From -12DB To +12DB
Low Pass Filter With Selectable Frequency Control
Built-in BT for Wireless Music Streaming
Blue LED Indicator for BT
Two Stereo RCA Output
Auxiliary Stereo RCA Inputs
Input Selector
Master System Volume
Fader Function for Front & Rear Channel
SUB Volume Adjustable for Subwoofer Channel
Mounting Hardware Included
RCA Auxiliary Input (Rear) inputs for MP3, DVD, or Phone
What’s in the box:
Equalizer
Screw
Bracket
Power Plug
Technical Specs:
Low Bass Equalizer Frequency: 63Hz
Bass Equalizer Frequency: 125Hz/315Hz
Mid-Bass Equalizer Frequency: 750Hz
Mid Equalizer Frequency: 2.2 KHz
Mid-High Equalizer Frequency: 6KHz
High Equalizer Frequency: 12 KHz
Each Frequency Adjustable: -12dB to +12dB
Output Voltage: 5V RMS @ 0.05% THD
Voltage: 11V-14.5V
S/N Ratio: 100dB
Separation: > 60dB
Frequency Response:20Hz~ 25 KHz
Subwoofer Frequency: 40Hz / 150Hz
Product Dimensions:7'' x 4.72''x 1.18'' -inches
www.PyleUSA.com 7
Page 8
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Loading...