Compatible with PAL DVD (Video CD)
and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
• L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
• Supplied remote handles multifunction software (multi-language
audio-track/subtitle, multi-angle,
multi-story, etc.), plus all basic
functions.
USE THIS PRODUCT SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30˚.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
2
Page 3
CONTENTS
Safety Information ........................................................................................4
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
4
Page 5
DISC NOTES
Disc formats supported by this player
DVD
E
D
I
V
12 cm disc
O
(Single-sided disc only)
Video CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
Discs which cannot be played with this
player
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moisturised with isopropyl
(rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional
record cleaners as they may mar the
surface of the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Label side up
Do not touch
the underside
of the disc
Do not bend
Wipe the disc from center
toward the outside edge
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Rough spots on
outside edge
Ball point pen
or pencil
Rough spots
on inside edge
5
Page 6
INSTALLATION
6
Note:
1. First remove the two screws that locket the unit core, then attach the brackets on
both sides of unit with screws (M4x6), last install the unit with screws (M5x25).
2. When fix the unit, you can slide the screw (M5x25) to left side or right side to meet
your needed position. In the figure above, select 1 and 3 position to fix the bracket,
and you can also select 2 and 4 position to fix the bracket.
6
6
Page 7
ELECTRIC CONNECTION
DVD PLAYER
AC/DC
ADAPTOR
(OPTIONAL)
DC 12 V IN DC 12 V OUT
_
+
+
REMOTE
BLACK
FUSE
3A
A/V OUT
DIGITAL
L/R VIDEO
AUDIO
YELLOW
BLACK
(OPTIONAL)
REMOTE CONTROL RECEIVER
CIGARETTE LIGHTER
YELLOW
VIDEO OUT
RED
AUDIO R OUT
WHITE
AUDIO L OUT
DIGITAL AUDIO
7
Page 8
REMOTE CONTROL
14
16
18
20
22
24
13
15
17
19
21
23
11
1
EJECT
2
3
5
MENU
4
SUBTITLE
6
7
9
8
10
12
GOTO
ZOOM
SETUP+10
DISPLAY POWER
OSD
AUX
STOP
REPEAT
MUTE
PLAY/PAUSE
SLOWTITLEAUDIO
PBC
ANGLE
A-B
ENTER
3214
7658
09
1. AUXPress the AUX to switch to external Audio/Video input.
(AUX is enabled in Disc Mode only)
2. EJECTPress it to eject the disc from the disc compartment.
3. STOPPress it to stop playback.
4. MENU Press MENU to display the root menu of the DVD disc.
5. AUDIOChanging of the AUDIO soundtrack on multi-audio soundtrack DVD
disc. Changing of the sound mode of the VCD/CD disc.
6. SUBTITLEChanging of the SUBTITLE Language on multi-subtitle language DVD
disc.
7. REPEATSwitch the Repeat mode of DVD/VCD/CD disc
8. GOTODisc search button, cooperatively used with numeric buttons.
9.
/ Press to skip to the next track & press to skip back one track.
10. ZOOMPress it to zoom the picture in scale x1.5, x2.0, x3.0
11.
/ Press to start forward rapidly & to reverse rapidly.
12. SETUPDisplay the SETUP menu.
13. DISPLAYDisplay statistical disc information during playback.
14.
POWERPress POWER to turn the unit ON or OFF
15.
Press once to pause a play, press again to resume continuous
playback.
16. MUTEPress it to eliminate the sound immediate
17. TITLE/PBC Display the TITLE menu that is stored in DVD disc changing between
PBC ON and PBC OFF on the VCD disc.
18. SLOWChanging for slow forward/reverse playback motion
19. ANGLEChanging of the view angle on multi-angle DVD disc
20. A-BPress it to repeat between two selected sports on DVD or VCD disc.
/ / /Cursor buttons in MENU Mode. Note: For models without built-in
21.
FM Modulator, the
/ buttons can be used for volume up/down
control.
22. ENTERConfirm the Track/Chapter selected with the number key or selected
with the cursor buttons on TV screen.
23. 0 - 9Numeric buttons
24. +10Press it to select 10th digits
8
Page 9
REMOTE CONTROL
PREPARING THE REMOTE CONTROL
Inserting the Batteries
1. Remove the battery cover as the direction indicated by the arrow.
2. Put the batteries properly with the positive and negative terminals of the batteries
are oriented indicated.
3. Close the battery cover.
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
To prevent damage to the unit, be sure to follow the connection diagram (page 7).
9
Page 10
BASIC OPERATION
4
Loading a DVD/VCD/CD Disc
1. Turn the ignition on the accessory
position.
2. Press the POWER button (1).
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
Ejecting a Disc
Press (EJECT) button (3) to eject the
disc.
Stopping Play
- Brief press the
the unit playback, when press the
(Play) button it can continuous normal
playback.
- Press (Stop) button twice, it will stop
the playback and go back to initial
Track/Chapter.
Rapid Forward/Rapid Reverse
Press FF & REW during play.
Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follow.
DVD/VCD/CD/MP3:
Normal Playback2X4X6X8X
Skipping Track
Press / on the remote handset or
front panel during playback.
Press to skip to next track, and to
back one track.
Note: For some VCD 2.0 discs
(PBC-playback control), and
buttons may be unavailable.
Slow Motion Play
Press slow button during playback.
Each time the button is pressed, the slow
mode changes according to the disc as follow.
DVD:
Normal Playback SF 2XSF 4XSF 8X
VCD:
Normal Playback SF 1XSF 2X
(Stop) button to stop
SR 8XSR 4XSR 2X
SF 3X
10
Note: For VCD, in any slow mode, press
ENTER button to return to normal
playback.
Pause (still picture)
Pressing
during playback will stop
play temporary. Return to normal
playback, press once again.
Repeat
Press the REPEAT button to select repeat
mode as follow.
DVD:
Press the REPEAT button to select repeat
mode as follow.
CHAPTER REPEAT ON TITLE REPEAT ON
REPEAT OFF
VCD/CD:
Press the REPEAT button to select repeat
mode as follow.
REPEAT OFFREP-ONE REP-ALL
1.
Continuously repeat at the current chapter/
track, when selected REP-ONE mode.
2.
Select REP-ALL mode to continuously
repeat all chapter/track on the current disc.
3.
When the player finish playback the current
disc last chapter/track, it will stop display
the elapsed time. When selected REPEAT
OFF mode (REP-ONE & REP-ALL
disappear at the screen display).
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
Aux input jack (4)
When the unit connect external A/V you
can press the AUX on the remote controller
to switch to the aux input mode.
Reset
Reset button is placed on the front panel
and must be activated with a ball point
pen or thin metal object. Reset button is
to be activated for the following reasons:
• Initial installation of the unit when all
wiring is completed.
•
All the function buttons do not operate.
• Error symbol on the display.
Remote Sensor (IR)
Point the remote handset to the remote sensor.
Receive the signal from remote handset.
Turning the player on/off
Press the (POWER) button on front of
panel or press (POWER) button on
remote control to turn the player on or off.
Page 11
BASIC OPERATION
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
DVD:
(1) Press DISPLAY for the first time:
T: 01/03 C: 002/025P: 00:02:27
TITLE ELAPSED
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
(2) Press DISPLAY for the second time:
T: 01/03 C: 002/025P: 01:05:27
TITLE REMAIN
(3) Press DISPLAY for the third time:
T: 01/03 C: 002/025P: 00:02:20
CHAPTER ELAPSED
(4) Press DISPLAY for the fourth time:
T: 01/03 C: 002/025P: 00:03:15
CHAPTER REMAIN
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
Video CD/SVCD/CD:
(1) Press DISPLAY for the first time:
T: 03/17 P: 00:00:25
SINGLE ELAPSED
(2) Press DISPLAY for the second time:
T: 03/17 P: 00:01:25
SINGLE REMAIN
(3) Press DISPLAY for the third time:
T: 03/17 P: 00:01:25
TOTAL ELAPSED
(4) Press DISPLAY for the fourth time:
T: 03/17 P: 00:01:25
TOTAL REMAIN
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
MP3:
Each time DISPLAY is pressed, the message
displayed on screen changes as follows:
CHAPTER ELAPSEDCHAPTER REMAIN
Multi-audio Language Function
DVD:
Press AUDIO during playback.
Each time the button is pressed, number
of the audio soundtrack language
changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
soundtrack are recorded, will be
display at screen left top corner.
VCD/CD:
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
MONO LEFTMONO RIGHTSTEREO
11
Page 12
BASIC OPERATION
TITLE Menu Function
DVD
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
1. Press TITLE during playback.
The title menu is display.
2. Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
VCD:
Press TITLE button while the disc is
playing, you can switch between “PBC
on” and “PBC off” mode.
Multi-subtitle Language Function
(For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed, number
of the subtitle language changes in
sequential order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded, will be displayed at
screen left top corner.
Multi-angle Function
(For DVD only)
Press ANGLE during playback.
Each time the button is pressed, number
of the angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only work for discs
having scenes recorded at different
angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
MP3 Disc Play
MP3 disc is playing in the DISC REPEAT
mode by default.
For example:
Mp3 PLAYER
ROOT
PLAY MODE
Use
/ / / buttons to select the
item or folder, then press ENTER button.
When select PLAY MODE, press the
REPEAT button repeatedly to select three
kinds of play mode.
REP-ONE:
Play the same song over and over again.
FOLDER REPEAT:
Play all songs in the current directory in
sequence, over and over again.
DISC REPEAT:
Play all songs in the disc over and over
again.
In the playback, use
item ahead or back.
: Rapid reverse, : Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button is pressed.
Using the FM Modulator (optional)
1.Setup the FM Modulator in the
preference setup menu to turn on (note:
the unit is initially set to FM Modulator
ON)
2. In CD Playing, open the radio and tune
the radio frequency to as same in the
General setup (88.7MHz or 88.9 MHz)
(Note: The unit initially set to 88.7 MHz)
3.At this time, the radio can receive the
audio to listing.
ROOT0
MP3 MUSIC1
SKY
MP3 HEAR YOUR
DSIC REPEAT
or to skip an
12
Page 13
SET UP
INITIAL SETUP
SETUP MENU --- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player under STOP mode.)
2. The initial SETUP menu is displayed.
3. Select the preferred item by using the
/ buttons.
4. Press ENTER buttons.
a. GENERAL SETUP
This setup page includes all the
item of TV display & audio output
feature. The detail please refer to
GENERAL SETUP MENU.
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
d. PREFERENCE SETUP
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCES SETUP MENU.
GENERAL SETUP
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
MAIN PAGE
Video Material
4:3
16:9
Normal
TV display setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
NORMAL/PS
NORMAL/LB
WIDE
TV Screen
4:3Wide (16:9)
Pan ScanLetter-box
13
Page 14
SET UP
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
MAIN PAGE
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on format on
image or picture under noise affect.
--- GENERAL PAGE ---
AUTO
HI-RES
N-FLICKER
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
MAIN PAGE
OSD LANG type setup
Select the preferred OSD language by
using the / buttons.
--- GENERAL PAGE ---
ENGLISH
FRENCH
GERMAN
ITALIAN
SPALIAN
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
MAIN PAGE
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVD disc is playing, (the angle mark)
will appears on the screen; if is set to
OFF, the mark will not appear.
ON
OFF
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
MAIN PAGE
CAPTIONS setup
Activate the CAPTIONS feature by
selecting ON. And release this feature
by selecting OFF.
14
ON
OFF
Page 15
SET UP
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
MAIN PAGE
SCR SAVER setup
Select the SCR SAVER output ON/OFF.
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
FM FREQUENCY
ON
OFF
88.7 MHz
SPEAKER SETUP
--- SPEAKER SETUP PAGE ---
DOWNMIX
MAIN PAGE
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
• Select the LT/RT to activate the Dolby
surround compatible output.
• Select the STEREO to activate simple
stereo mode.
LT/RT
STEREO
AUDIO SETUP
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
ANALOG
SPDIF/RAW
SPDIF/PCM
88.9 MHz
MAIN PAGE
FM Modulator Frequency setup
Select the preferred FM frequency by
using the
Note: The built-in FM Modulator is an
optional feature.
/ buttons.
MAIN PAGE
AUDIO OUT
This is to activate the audio output from
ANALOG mode to SPDIF/RAW mode to
SPDIF/PCM mode.
15
Page 16
SET UP
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
DYNAMIC
LINE OUT
RF REMOD
LPCM OUTPUT
MAIN PAGE
OP MODE
There are two operating modes for the
Dolby Digital decoder: LINE OUT and
RF REMOD.
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
FULL
6/8
4/8
2/8
OFF
MAIN PAGE
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
LPCM 48K
LPCM 96K
MAIN PAGE
LPCM OUTPUT
Select the LPCM OUTPUT between
LPCM 48K and LPCM 96K.
PREFERENCES SETUP
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
AUTO
NTSC
PAL
Dynamic Range Control
Select DRC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
TV type setup
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you connected
to PAL TV.
Select AUTO format, the player TV output
format will according to the DVD disc
format.
16
Page 17
SET UP
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
OFF
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
1 G
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO_PARENTAL
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and confirmed by
pressing ENTER button.
17
Page 18
SET UP
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
CHANGE
PASSWORD
Select the change and press ENTER
button. Type the old password (The initial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
ON
OFF
FM Modulator ON/OFF setup
Activate the FM Modulator feature by
selecting ON. And release this feature
by selecting OFF.
Note: The built-in FM Modulator is an
optional feature.
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
RESET
DEFAULTS
Select reset to become factory initial
setting.
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
FM MODULATOR
MP3 PLAYER
MAIN PAGE
NO MENU
WITH MENU
Mp3 PLAYER
In this item, you can select NO MENU
mode or WITH MENU mode.
18
Page 19
SET UP
DEFAULTS TABLE
General Setup
Speaker Setup
Audio Setup
Preferences TV TypeAUTO
TV DisplayNormal/PS
PIC ModeAUTO
Angle MarkON
OSD Language
CaptionsON
SCR SaverON
DownmixStereo
Audio OutAnalog
OP ModeLine Out
DynamicFULL
LPCM Output
AudioEnglish
SubtitleEnglish
DISC MenuEnglish
Parental
Password3308
DEFAULTSRESET
FM MODULATOR
MP3 PLAYER
English
LPCM 96K
NO PARENTAL
ON
With Menu
19
Page 20
SPECIFICATIONS
Supply Voltage: 12V DC (11V-15V), test voltage 14.4V, negative ground
Current Consumption: Less than 2A
Signal System: Compositive video 1.0Vp-p 75Ω
Discs Played: (1) DVD-VIDEO Disc
Audio Output Level: 600Ω (2 ch 2.0 Vrms)
Audio Signal Output
Characteristics: (1) Frequency Response20 Hz - 20 KHz
: (3) Wow and FlutterBelow measurable limits
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
20
88-V2351-12
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.