PLD94BK
PLD94GR
PLD94BK - PLD94GR
Headrest Vehicle 9'' Video Display Monitor
Multimedia Disc Player, USB/SD Readers, HDMI Port
MANUAL CONTENTS:
Features & Specs 1
System Layout 2
Headrest Installation 3
Troubleshooting 3
CD/DVD System- Menu/Interface 4
Controls & Operation 5
PLD94BK - PLD94GR
Headrest Vehicle 9'' Video Display Monitor, Multimedia Disc Player, USB/SD Readers,
HDMI Port
FEATURES:
• Audio & Video Vehicle Headrest Entertainment System
• 9'' LCD Digital Wide Screen Display
• High Resolution Slim Design
• Built-in Top-Loading DVD/CD (Multimedia Disc) Player
• Includes Universal 'Clip-On' Headrest Mounting
Hardware
• Versatile Mounting Options: Rotating Screen
Display Settings
• Easily Removable Without Causing Damage
to Interior
• Tilt/Angle Adjustable Monitor Display Screen
• User-Friendly Control Interface
• USB & SD Memory Card Readers
• USB Port Double as Device Charge Port
• Front Panel Button Controls
• RCA (L/R) Audio/Video Inputs/Outputs
• Ability to Connect to Additional Video
Display Monitor
• AV Input Connector Jack
• HDMI Input Port
• Connect Smartphones & Compatible Devices
to Instantly Stream Video
• Built-in Speakers and Headphone Jack
• Built-in IR Transmitter for Wireless IR Headphone Use
• Integrated FM Transmitter
• Full Function Wireless Remote Control
• Zoom/Volume/Subtitle/Source Selection Controls
• English OSD Menu
• Includes All Necessary Mounting Hardware
& Cables/Wiring for Installation
*Can be Hard-Wired or Powered via Included Plug-in
Cigarette Lighter Power Cable
TECHNICAL SPECS:
• Video System: PAL / NTSC Compatible
Auto Switching
• CD/DVD Player Compatible: CD-R, CD-RW,
DVD, VCD, , DVDR+, SVCD, DVCD
• File Compatibility: MP3, MP4, MP5, JPG,
MPEG4, WMA, AVI
• Maximum USB/SD Card Size: 8GB
• Aspect Ratio: 16:9
• Resolution: 800 x 480 Pixels
• Contrast Ratio: 300:1
• Brightness: 350 cd/m2
• Power Supply: DC 12V
• Dimensions (W x H x D): 10.2'' x 8.6'' x 2.3''
• Weight: 6.62 lbs.
Disclaimer
Unauthorized reprint of partial or full content is prohibited. We reserve the right of changing hardware and
software specication mentioned in the manual at any time without prior announcement. Illustration and
legend may differ from practical situation. Please note we will never be responsible for any consequences
due to use of this product.
1
www.PyleUSA.com
WARNINGS:
Avoid rain, moisture or damp environments. Do not repair the machine by yourself. Please turn off the
machine and refer to the manufacturer or specialist. If any problem arises, the factory or providing agent will
arrange specialized personnel to disassemble and repair the unit. Please keep the unit from exposure of
excessive dust, oil and direct sunlight. Do not use diluents or other chemical cleaners. Please clean the unit
by soft cloth and gentle cleansers. The unit should not be exposed to extreme temperatures, please keep
within room temperatures. Please prevent the machine from the inuence of other equipment.
For your safety, please do not turn or operate this unit when driving as it may be illegal in some countries
and regions and be a potential hazard.
Please refer to the help of a professional service technician for installation.
CD/DVD Support:
DIVX/MPEG4/DVD/DVDR+/SVCD/VCD/DVCD/CD/MP3/WMA/CD-R/RW/HDCD+-R/JPEG or CD-ROM7.
ATTENTION
There may be some small and bright spots on the screen. This is a common technical matter and does not
indicate any quality problem of this machine.
FRONT PANEL CONTROLS
A IR Window
B Eject Disc
C Previous
D Next
E Power / Source Select
F Back / Volume Down
G Menu I Play / Pause
H Forward / Volume Up
I Remote Window
2
www.PyleUSA.com
No sound and
image
Power is disconnected ; the machine is not turned on
No
image
Disc
is scratched; signal wire is disconnected; wired
incorrectly
No
sound
Volume too low or the volume setup is not
workable
Black
screen
Incorrect setup of image luminance and
contrast; Under voltage
Blurring and unstable image
Disc
is scratched
Color cast
function menu setup
is
incorrect;weak
signal;
Fuse is
disconnected:
change fuse
specication
No image after loading the disc
Only audio frequency for the disc; disc is scratched;
Disc format is not
supported
Instable sound caused by
vibration
DVD
is dirty or seriously
damaged
Instable sound even with no
vibration
Disc
is dirty or scratched, clean or replace the disc
TROUBLESHOOTING
SIDE PANEL CONTROLS
A USB Port
B SD Card Slot
c Headphone Jack
D A/V Input
E HDMIInput
F Power Input
Troubles
No
power
Voltage is not accurate
WIRING DIAGRAM
Solutions
: chec
Audio
Video
k interconnect circuit;
Outputs
www.PyleUSA.com
Audio
Video
Inputs
Red, Power, 12V DC
Black Ground
3
INSTALLATION
Mounting Pieces: U-shaped brackets, support rings and rectangular headrest support plate:
Slide the plastic support rings into the u-shaped brackets, then slide into the rectangle headrest support
bracket. Assemble the u-shaped mounting brackets rstly, slide the mounting brackets into the
headrest's rectangular dock assembly, remove your headrest, position the Video Display Monitor, then slide
the headrest through the u-shaped mount, nally back into the seat.
Remove the headrest by raising your car headrest's poles all the way up. Slide the plastic rings into the
u-shaped brackets, then slide the completed assembly into the headrest dock. The headrest dock then
receives the Monitor system and locks into place with the tightening bolt.
Place the rectangular docking plate in between your vehicle's two headrest support poles. Then push the
u-shaped brackets into the rectangular docking plate. Ensure the dock plate is centered between the
headrests' supports- after you slide them through.
Hold up the monitor assembly and insert the metal attachment plate in the back of the monitor unit, going
into the rectangular bracket, adjust to the desired angle.
4
www.PyleUSA.com
VIDEO SYSTEM INTERFACE
Use the included remote control or buttons on the monitor panel to control your media.
Hold in the MENU button to access settings, hold the MENU button to exit the settings screen interface.
MAIN MENU OPTION SETTINGS:
• PICTURE
• SOUND
• SYSTEM
• PLAYER
SETTINGS & CONFIGURATION- SYSTEM SETUP
Use the included remote control or buttons on the monitor panel to control system setup conguration.
www.PyleUSA.com
5
SETTINGS & CONFIGURATION
PICTURE
Mode
Rotate
SOUND
Sound Mode
Down Mix
OP Mode
Dynamic Range
FMRF
IRRF
Volume
SYSTEM
Language
OSD Duration
Video Output
Reset
standard, vivid, soft, optimal, user (custom)
State 1, State 2, State 3, State 4
standard, music, speech, movie
LT/RT, stereo, VSS
Line out, RF remod
OFF,1/8-7/8,full
Frequency selection
A, B, OFF
0-15 (Max)
English, French, Chinese, Italian, Spanish, Portuguese, Deutsch
Never, 5, 10, 30 & 60 seconds
AV, OFF
Rest System & Settings
PLAYER
TV System
Screen Save
Aspect Ratio
Password
Resume
Audio Language
Subtitle Language
Menu Language
PAL, NTSC, AUTO
ON /OFF
4:3LB, 4:3PS, 16:9
(Default 0000)
ON/OFF
Selectable
Selectable
Selectable
Please note:
• State 1, State 2, State 3 and State 4 allows the monitor's display screen to rotate and ip. To accommodate
for rear view and backup camera system compatibility, the settings menu also rotates and ips - this may
result in difficulty of reading the menu settings text. To assist in reading the menu text settings, revert the
ROTATE setting selection back to 'State 3' and resume conguring your settings.
• Change the TV System settings to adjust the DVD output format of your media disc.
Power ON/OFF: Press and hold the Power button to turn ON /OFF the unit
MONITOR SOURCE SELECTION
Press the Power button to switch between the (4) source input selection modes.
• Disc, AV1, AV2, HDMI
CD/DVD SYSTEM OPERATION
Insert a CD/DVD --with the label facing the back of the PLD93.The contents will automatically play upon
insertion.
MP3 PLAYBACK
• Insert USB Flash or SD Memory Card and your media will automatically play.
6
www.PyleUSA.com
Loading...