Pyle PLCMHD80 User Manual

Download

MODE

/F1 /F2

PLCMHD80

To insure best use of the unit, please read the user’s manual carefully

CAUTION

1. Do not use any damaged or leaking battery, if using a battery to power.

2. Do not expose this product to direct sunlight, heat or extreme humid

conditions.

3. Keep the unit away from strong/direct light while using this product so as to

obtain the clearest and the most colorful picture. Please use sun

shade for outdoor use.

4. Please avoid heavy impacts or dropping the unit, handle with care.

5. Do not use chemical solutions to clean this unit, Please simply

wipe with a clean soft cloth.

6. Do not attempt to take apart or repair the unit by yourself, to avoid damage

the product.

Features

HD 1080p Picture

Universal Mul-Funcon Video Monitor

Field Monitor: Acts as a Sub-Monitor for a Bigger Picture

7-inch Hi-Res Display Screen

Lightweight, Compact & Portable

Input Interface: HDMI, AV, USB, OSD Controller, Headphone Jack (3.5mm)

Front Panel Buon Control Center

(4) Custom Sengs Funcon Buons

Built-in Speaker

Digital Zoom Ability

Works with DSLR Cameras, Video Cameras, Digital Cameras, etc.

Brightness, Contrast, Saturaon, Sharpness, Color Temp, Tint Adjustable

Screen Modes: Screen Marker, Center Marker, Picture Freeze, Mirror Flip

Includes Wall Power Adapter (*Rechargeable Baery Not Included)

What's in the Box:

Field Monitor

Detachable (Long) Leather Sunshade

Detachable (Short) Sunshade

Shoe Mount Camera Clip

HDMI Cable & Cable Clamp

Wall Power Adapter

CONTENTS

1. Product description

2. Operation instruction

3.Technical parameters

4. Trouble shooting

1. Product description

1. 1 Front view:

MODE

/F1 /F2

10 9 8 7 6 5 4 3 2 1

1. Power indicator light: when power on/standby, it turns red; when signal in,

it turns green.

2. : Power on/off

3. F4:custom button, enter secondary menu item f(self-deﬁned button), then

self-deﬁne the function that user need

4. F3: custom button same as F4 operation

5. ^/F2: Multi button. in OSD Menu for up adjustment, it can be custom button

when not in OSD, See F4.

6. v/F1: Multi button. in OSD Menu for down adjustment, it can be custom

button when not in OSD, See F4.

7. MENU: Menu button

8. >: Volume up, in OSD menu to increase the value of analog in the menu.

9. <: Volume down, in OSD menu to decrease the value of analog in the menu.

10. MODE: Signal Switch Button.

11. LCD Display.

1.2 Rear view:

USB

UPGRADE

OSD

Controller

2 3

HDMI

DC 12V

1. USB Update Port.

2. OSD Controller input, Can insert OSD Controller into this port, to have a

remote operation on the parameters of the monitor.

3. : Earphone insert.

4. AV: AV signal input, to input the AV signal into the monitor through the

assorted port.

5. HDMI: HDMI (High Deﬁnition Multimedia Interface) signal input.

6. :DC power input interface, pole of the power should match the image.

DC 12V

7. Battery Plate (Only compatible with Canon LP-06).

8. Built-in Speaker

1.4 HDMI Lock

1. HDMI locking plate

2. Locking screw

1 2

To use HDMI locking plate to lock the plug of HDMI cable, then put the locking plate close to the monitor, and ﬁnally bolt the locking screw to lock the plate with the monitor, As the picture below (arrow direction)

1.5 Sunshade

1 Sunshade 2 Sunshade Frame

3 Complete Shape 4 Sunshade Application

First to open the sunshade 1 , and match the sticker on the sunshade inside to the marked part of the sunshade frame, press the side of the sunshade frame, 3 smooth and press 3 sides on the sunshade, 4 to lock the sunshade with the monitor tight.

1.6 Battery Pl ate

Use the battery plate and install on the back of the monitor, you can assemble the corresponding battery to power the monitor.

The Battery Plate included is pictured below:

LP-E6

• LP-E6 battery plate for batter of canon DV:

Canon LP-E6

Remark: Different battery clips are compatible with, and attach to the back of the display monitor. This system only includes the clip listed above, but you may be able to purchase different and compatible battery clips from your camera’s retailer. The system includes a wall power adapter.

2. Operation instruction

Before setting the menu functions, please make sure the device is connected correctly, Power on the unit, switch the dial to the ON position. According to the input signal, make sure to adjust the display’s input to display the proper display on the LCD screen.

2.1 Button instructions:

: Power on/off

MODE: Signal Switch Button

MENU: Menu button

F3. F4: Custom button, enter the OSD menu of the F secondary menu,

operate“ >” on the unit to select, then using “v/F1” or “^/F2” to select,

Press “MENU” button to custom Settings.

v/F1: Multi button, In OSD Menu for down adjustment, it can be custom button

when not in OSD. See F4.

^/F2: Multi button. in OSD Menu for up adjustment, it can be custom

button when not in OSD, See F4.

>: Volume up, in OSD menu to increase the value of analog in the menu.

<: Volume down, in OSD menu to decrease the value of analog in the menu.

2.2 Menu instructions

image color (including 2 page menu, use “v/F1” or “^/F12” to enter).

Pic. Mo de

Brigh tn es s

Contr as t

Satur at io n

Sharp ne ss

Color T em p.

Red

Green

Stand ar d

6500

136

123

Blue

Tint

128

• Pic. Mode: Standard, dynamic, downy, user When select”user”, it could according to the practical situation to adjust the image of brightness, contrast, saturation, sharpness.

• Brightness: To adjust the image’s brightness.

• Contrast: To adjust the brightest and darkest ratio of the image, please

note the sense of picture when adjust, proportion too large or small, will make the picture lose the color of showy.

• Saturation: To adjust color concentration.

• Sharpness: Also called “Resolution”, an indicator for the image plane

deﬁnition and image edge sharpness, if sharpness is higher, the the details contrast on the image is more higher, the image is more clearly.

• Color Temp: 6500, 9300, User When select “user ”, adjust the R/G/B to meet the different user’s requirement on the different Color Temp.

• Tint: On NTSC video mode, the image color tint different is adjusted by tint.

Setting (including 2 page menu, use “v/F1” or “^/F12” to enter).

Menu of Page one

Langu ag e

Aspec t Ra ti o

No Sign al

OSD Tra ns

OSD H

OSD V

Camer a Mo de

ZOOM Al l

Engli sh

Autom

Blue Sc re en

Off

• Language: language for OSD: Chinese / English.

• Aspect Ratio: To change the display to ratio panoramic view, automatic,

just scan, zoom 1, zoom 2, 16: 9, 4:3.

• NO Signal: Color options of screen background when no signal: black screen, white screen, red screen, green screen, blue screen.

• OSD Trans.: To adjust the level of transparent.

• OSD H: To adust the OSD position in horizontal.

• OSD V: To adust the OSD position in vertical.

• Camera Mode: the monitor video has real-time images. NO black screen,

NO delay, perfect without distortion.

• ZOOM ALL: press“<” or “>” button, to adjust the image to Zoom in or Zoom out.

Menu of page two

Osd Tim e

U/D ZOO M

L/R ZOO M

USB Upg ra de

Reset

Off

SW Vers io n: V 1 .5

• OSD Time: To adjust the clock.

• U/D ZOOM: Press“<” or “>” button, to adjust the proportion of the image up

and down to Zoom in or Zoom out.

• L/R ZOOM: Press“<” or “>” button, to adjust the proportion of the image left and right to Zoom in or Zoom out.

• USB Upgrade: When the need for the native data application software upgrade, copy the ﬁle to the U disk, again through the USB cable to connect with upgrade USB port, press “>” key to conﬁrm, After the upgrade, monitor will automatically restart.

• Reset: Press“>”, Back to original setting.

Function

Cente r Ma rk er

Safe fr am e

Image F re ez e

Image F li p

Check F ie ld

P2P

Focus A ss is t

Off

• Center Marker: To set centre mark (cross mark) display.

• Safe frame: To adjust screen marker (off, 96%, 93&, 90%, 85%, 80%, 2.35:1).

• Image Freeze: the current picture still (capture function).

• Image Flip: The U/N, L/R of the image around ﬂip.

• Check ﬁeld: Color, balck and white/monochrome switching, to switch image

color, black and white, monochrome (red, green, blue).

• P2P: The display mode that made the resolution of the image consistent with display of the physical resolution.

• Focus Assist: as viewﬁnder to peaking focus assist image (under HDMI input).

Shortcut button setting

Check F ie ld

Focus A ss is t

Cente r Ma rk er

Safe fr am e

• F1: Optional F1, then press “>”button, can select (center marker, safe frame, monochrome display, check ﬁeld, display ratio, image ﬂip, pixel to pixel, Image Freeze, camera mode), use “v/F1" or “^/F2" button to select one of optional as deﬁnition function, Press “MENU” button to conﬁrm and exit or press “MENU” again return to setting.

• F2: custom button, see F1

• F3: custom button, see F1

• F4: custom button, see F1

3. Technical parameters

Panel size Panel type Resolution Backlight Dot pitch Display ratio Brightness Contrast ratio Response time Viewing angle Input signal Video color system

HDMI support format

Headphone output Input voltage Power consumption Unit size(mm) Unit weight

Installation method Working temperature Storage temperature

IPS LCD 7.0 inch IPS LCD 1280X800XRCB=3072000 Pixels LED

0.11775(W) x0.11775 (H) 16:10 400 cd/m 800:1 25ms 89°/89° (L/R) 89°/89° (U/D) Video/Audio/HDMI PAL-4.43 / NTSC-3.58 480i/480p/576i/576p

720p(60/59.94/50/30/29/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/24fps/23.98/23.98fps

stereo 3.5mm DC: 7.4~35V ≦ 5W 176(L)x130(W)x17(H)mm 400g 1/4 inch bracket screw holes, can be

to the not shoe mount, tripod ﬁxed installation

-20~50°C

-30~60°C

easily connected

4. Trouble shooting

4.1 Only black and white or monochrome picture:

1. Please check saturation, brightness & contrast adjustment.

2. Please check monitor “color” from the menu “monochrome” is in black and white or monochrome image or other condition.

4.2 NO Image after put on the power

1. Check signal cable contact are in good condition, a monitor is synchronized with the input signal, and can press the “MODE” give it a try.

2. Check signal cable connecting, and make sure use the standard adapet connect the monitor, if power supply by battery, please check the battery whether whether fully charged.

4.3 No sound

1. Volume control did not open, can press the volume button, and try increasing the volume.

2. Check the AUDIO input and ensure there have AUDIO signal.

• Remark: if there are still other problems, please contact with our related deals. It there are changes without prior notice.

Pyle PLCMHD80 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual