Page 1
VEHICLE DVR DASH CAM KIT
HD Video Recording System
with Rearview Mirror Monitor,
Rear-View Backup Camera
7.4’’ -inch LCD Display,
Compact Dash Cam,
Page 2
DESCRIPTION
Vehicle DVR Dash Cam Kit
HD Video Recording System with Rearview Mirror Monitor, 7.4’’ -inch LCD
Display, Compact Dash Cam, Rear-View Backup Camera
MONITOR WIRING CONNECTION:
REAR VIEW BACKUP CAMERA:
Angle Adjustable Camera Lens
Located on the camera housing are 2 screws which lock the camera lens
angle in position. The screws may be loosened to allow camera lens angle
adjustment. Loosen the screws, adjust the camera lens into the desired
angle, then tighten the screws securely. Be sure as to not overtighten the
screws.
1
www.PyleUSA.com
Page 3
OPERATION INSTRUCTIONS:
1. V1 connect the left optic camera signal; V2 camera signal connection
(reverse priority display); V3 connection right camera signal.
2. Trigger (rearview camera line) displays rear camera screen; trigger (left
video line) shows the left optic camera; trigger (right video line) display
right depending on the camera screen; no automatic trigger machine
after shutdown.
3.Press the menu button to display the menu, then press (regulation) (or
regulation) can adjust the size parameters.
4.The environment sensing function, the screens brightness may change
while the changing of ambient light, if ambient light is strong, the
brightness of the screen will increase, in order to get a clearer image in
the same light; when the ambient light is weak, the brightness of the
screen can be reduced. Make sure the brightness is right, not too bright
and irritating to the eyes.
Rearview Backup Camera Quick Installation:
Connect the camera to the using the included DC 12V power cable.
Connect the DC 12V power cable to the positive 12V reverse tail light in the
rear of your vehicle. Then, connect the black wire, of the DC 12V power
cable, and ground properly. This connected power and ground cable then
connects to the camera, and will supply power to the camera directly.
Next, use the included yellow RCA video connector cable, and run that
cable from the yellow RCA video connector jack of the camera, to the yellow
video connector of your compatible display monitor.
Yellow RCA cable when connected, automatically retrieves the video signal
when activated (when your vehicle is switched into the reverse gear).
1. Locate the reverse taillight wiring behind your vehicle's reverse light. You
may need to remove an interior panel, or other cover, in order to locate
the wiring. Connect the included power 12V DC power cable to the
reverse light.
a. Connect the power cable's Red wire to your vehicle's reverse light positive
wire.
b. Connect the power cable's Black wire to your vehicle's reverse light
negative wire.
2. Connect the camera to this 'reverse light' connection installation, then
mount the camera in the desired location.
3. Run the RCA video cable from the camera to your compatible video
display monitor.
www.PyleUSA.com
2
Page 4
SYSTEM FEATURES:
● Vehicle DVR Driving Video Recording System
● Rear-View Mirror Assembly with Built-in 7.4’’ -inch Display Screen
● Camera + Camcorder: Snap Pictures or Record Video
● Night Vision Illumination
● Built-in G-Sensor Auto-save Recording during Collision
● Built-in Microphone for Audio Recording
● True Color Reproduction and Image Adjustment
● Micro SD Memory Card Slot
● Easy File Saving & Sharing
● Universal Dashboard / Windshield Mountable
*Designed to Replace Your Existing Rear-View Mirror Assembly
WHAT’S IN THE BOX:
● Rearview Mirror Assembly
● DVR Dash Cam
● Backup Camera
● Power & Wiring Harness
● RCA Video Cable
● Camera Power Supply Cable, 3.2’ ft.
BACKUP CAMERA:
● Video System: PAL/NTSC Auto Switching
● Image Sensor: 1/4'' Color CMD
● Eective Pixel: 656 x 492Pixels
● Resolution: 420 TV Lines
● Lens Angle: 170° Degree
● Marine Grade Rating: IP-69
● Video Output: 1.0V PP-75 Ohm
● Camera Dimensions (W x H x D): 10.0" x 1.3" x 1.3" -inches
● Weight: 0.72 lbs
3
www.PyleUSA.com
Page 5
TECHNICAL SPECS:
● Video System: PAL/NTSC Auto Switching
● LCD Screen: 7.36’’ TFT LCD
● Monitor Resolution: 1280 x 420 Pixels
● Brightness: 1000cd/m2
● Aspect Ratio: 16:9
● Monitor And Camera Connector: RCA connector
● AV Inputs: 3CH- AV1- Left Camera, AV2-Back Camera, AV3-Right Camera
● Micro SD Card Support: Up to 32GB, Not Included
● Power Consumption: 7W (Working) 0.5W (Standby)
● Power Supply: DC 12-24V
● Monitor Dimensions (L x W x H ): 10.0" x 1.3" x 1.26" -inches
BACKUP CAMERA WIRING:
Since the 7.36 inch mirror monitor with 3ch video input, users can connect
the video camera input to the monitor V3 ch for backup.
EASY FILE SAVING & SHARING
To use the recording function, use the external dash camera mirror monitor.
View the recorded video and playback output in the 7.36 inch mirror.
www.PyleUSA.com
4
Page 6
Loading...