Pyle PLCD54MP User guide

PLCD54MP

CD/MP3 Stereo Receiver Power Amplifier

AM/FM/CD/MP3/USB/AUX Stereo Receiver, Single DIN,

30 Preset Memory Stations, LCD Display

with Remote Control (Black)

INTRODUCTION

CONTENTS

What’s in the Box
DIMENSIONS
OVERVIEW OF THE COMPONENTS
GENERAL OPERATION

Power On/O

Removing The Front Panel
Volume Up And Down
Mute On/O
Changing The Modes
Setting The Audio/Menu
Display
Auxiliary Input Jack
Reset

RADIO OPERATION

Switch Between Europe/USA/Asian/Russian Frequency

Changing Bands
To Store / Recall Preset Stations
Manual Tuning
Seek Tuning
Automatic Store Preset Station

CD/USB OPERATION

Insert/Eject CD

USB Connection
Select Next Track Or Previous Track
Fast Forward/Reverse
Play/Pause
Introduction Scan
Repeating The Track
Playing All Tracks In Random
Folder/Track Navigation

WIRELESS BT OPERATION

Pair And Connect

Make A Call
Redial Last Dialed Number
Answer A Call
Reject A Call Or End A Call
Switch Audio Between Car Audio And Mobile Phone
Adjust Talk Volume Audio Streaming (A2DP)

APP OPERATION
SPECIFICATION

www.PyleUSA.com

2

3
3
3
5
6

7

7

10

11
12

INTRODUCTION

Do keep your original invoice and purchase receipt in a safe place in case
of future service and warranty claims. You may also contact your appointed
service agent for any future technicalsupport requirements.

What’s in the Box:

• Stereo Receiver

• Remote Control

Dimensions (Unit: mm)

1
. 20

www.PyleUSA.com

3

WIRING CONNECTIONS

COLOR FUNCTION

Red Ignition Line

Black

A

Blue

Yellow

Earth wire

ANT automatic

Power supply

B

www.PyleUSA.com

4

Green
Green/Black

White
White/Black

Gray
Grey/Black

Violet
Purple/Black

Rear left horn (+)
Rear left horn (-)

Front left horn (+)
Front left horn (-)

Front right horn (+)
Front right horn (-)

Rear right horn (+)
Rear right horn (-)

COMPONENTS

OVERVIEW OF THE COMPONENTS

152219

21

4

1

3 1214 1613

1. Power on/o, Mode (Source)

2. Volume knob, SEL (Push for Audio/Menu Setting)

3. AS (Auto Store Preset Station)

4. Mute

5. Preset #1, Play/Pause

6. Preset #2, Intro Scan

7. Preset #3, Repeat

8. Preset #4, Random

9. Preset #5, Folder Down, Jump 10 Track backward

10. Preset #6, Folder Up, Jump 10 Track forward

11. Answer Call, End Call (press and hold)

12. Tune/Track down, reverse

13. Tune/Track Up, fast forward

14. IR Remote Sensor

15. LCD Display

16. Band, Disp (Display clock time and other info)

17. USB Port

18. Aux Input Socket

19. Hands-free Microphone

20. Eject CD

21. Disc Slot

22. Reset

17

20
18

www.PyleUSA.com

5

GENERAL OPERATION

Power On/O

• Press any button to turn the unit on.

• Press and hold the /MODE button to turn the unit o.

Removing The Front Panel
Press the RELEASE button to detach the front panel.

Volume Up And Down

Rotate the Volume knob to adjust the volume level.

Mute On/O
Briey press the button to toggle mute on or o.

Changing The Modes

Press the /MODE to select between Radio, Disc, USB (with USB device inserted),
AUX-IN (auxiliary input) and BT (Wireless BT) modes.

Seing The Audio/Menu

• Press Volume (SEL) button momentarily to select between the audio/

menu functions: BASS, TREBLE, BALANCE, FADER, EQ USER/FLAT/CLASSIC/
ROCK/POP, LOUD OFF/ON, BEEP OFF/ON, CLOCK 24/12, CLOCK SETTING,
BT MENU/AUTO, DISTANT/LOCAL, STEREO/MONO, AREA EU/US/AS/RU.

• Rotate the Volume knob to adjust or activate your desired function/audio.

Display

• With the unit on, press and hold DISP to display clock time.

• Press and hold DISP to toggle display between various displayed information.

Auxiliary Input Jack

Usinga 3.5mm cable to connecta external device such as MP3 players, CD
players etc. to the auxiliary input jack on front panel. Then you can hear the
sound of other playback devices such as MP3 players, CD players etc. through
your car speakers.

Reset

Push the RESET button (behind the front panel) with a thin object with a
pointed end to reset the unit back to the factory default settings 6 Second.

www.PyleUSA.com

6

RADIO OPERATION

Switch Befween Europe /USA/Asian/Russian frequency

In radio mode, press the Volume button momentarily to choose the “AREA EU/
US/AS/RU" item, then rotate it to switch between EU(europe), US (USA), AS
(Asian), RU(Russian) frequency. The system will change the frequency setting in
about 3 seconds.

Change Bands

In radio mode, shortly press the BAND/DISP to select between the FM1, FM2,
FM3 and AM1 (MW1), AM2 (MW2) bands.

To Store/Recoil Preset Stations

The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1
and AM2) for a total of 30 preset stations.

• To memorize a station:

Press and hold the desired preset buttons (1-6) to save a radio station.

• To recall a preset station:

Briey press the respective station button (1-6) to recall the corresponding
preset station.

Manual Tuning

In the radio mode:

Briey press the or button to search the next or previous frequency step
by step.

Seek Tuning

In radio mode:

Press and hold the or button to seek to next or previous strong station.

CD/USB OPERATION

Insert CD

With the label facing up, insert a standard size CD into the CD slot.
Playback will begin automatically.

Eject CD

Press (Eject button) to eject the CD.

www.PyleUSA.com

7

USB Connection

If you would like to playback les contained in a USB stick, please insert the
stick into the USB port. The MP3/WMA and other music les will be played
automatically.

Note: The USB port of this car radio is also designed for charging for iPhone/
andriod mobile phone. The charging current consumption is 1 ampere.

Select Next Track Or Previous Track

In the CD/USB mode, briey press the or button to play the next or
previous track.

Fast Forward/Reverse

Press and hold the or button to fast forward or reverse a track.

Play/Pause

Press the button to interrupt the CD/USB playback (pause function).
Press this button again to continue the playback.

Introduction Scan

Press INT to play the rst 10 seconds of each track on CD/USB.
Press again to cancel the INT function.

• INT ON - Plays the rst 10 seconds of each track.

• INT OFF - Cancels the INT function.

Repeating The Track
Press RPT to toggle between RPT FLD, RPT ALL, and RPT ONE.

• RPT FLD - Continuously repeats all les in current folder.

• RPT ALL - Plays all tracks on CD/USB device.

• RPT ONE - Continuously repeats selected track.

Playing All Tracks In Random

Press RDM to play songs in random order, press again to cancel the RDM
function.

• RDM ON - Plays all tracks in random order.

• RDM OFF - Cancels the RDM function.

www.PyleUSA.com

8

Folder/Trock Navigotion

• Press the or button to select the previous or the next folder.

Folder access is only available on devices with more than one folder.

• Press and hold the or buttons to jump 10 tracks backward or forward.
It is required that over 10 tracks be available on the storage medium.

Remote Control

Name of buttons and location

1. (Power ON/OFF) Button

2. VOL +/VOL- (volume up/down)

3. Band button, (reply call)

4. button: Tune down, seek down;
Track down, fast reverse

5. SEL (selection) button

6. button: Tune up, seek up; Track up,
fast forward

7. Mute/DEL (Delete) button

8. CLK (clock setting) button,
(end call) button

9. button: preset station 1 button,
keypad 1

10. INT (intro) button,
preset station 2 button, keypad 2

11. RPT (repeat) button,
preset station 3 button, keypad 3

12. RDM (random), preset station 4 button,
keypad 4

13. -10 (previous 10 tracks),
preset station 5 button, keypad 5

14. +10 (next 10 tracks),
preset station 6 button, keypad 6

15. ST (stereo) button, keypad 7

16. LOUD (loudness) button, keypad 8

17. AMS (automatic music search) button,
keypad 9

18. MODE button, keypad

19. EQ (Equalizer) button, keypad 0

20. LOC (local)/DX button, keypad #

www.PyleUSA.com

9

WIRELESS BT OPERATION

Pair And Connect

Before using the Wireless BT device as a handsfree system for a BT enabled
mobile phone for the rst time, you must pair and connect the two devices
as follows:

1. In any mode, prior to pairing and connecting, the BT logo on the LCD indicating
that no device is connected. The head unit broadcasts the pairing signal
constantly when no devices are connected. Activate the BT on your device
before you begin with the pairing process.

2. When your phone nds the car audio system, the “PYLE" name will be displayed
on your phone screen.

3. Choose the “PYLE" from your mobile phone list to pair and connect with the
car audio system. Upon conrming, the BT logo will stop ashing.

4. When pairing is complete, the mobile phone audio will automatically transfer
to the car audio system whenever a call is made or received, or when the
mobile phone plays music.

Note:

For more deatails of Wireless BT pairing, please refer to the owner's manual for
your mobile phone.

Make A Call

• To make a call, dial the call directly from the paired mobile phone.

Redial Last Dialed Number

Press and hold the button to redial the last dialed phone number.
Press the button to activate SIRI function.

Answer A Call

When the mobile phone is called, the incoming telephone number displays on
the LCD display, press the button to answer the incoming call.

Reject Or End A Call

Press the button to reject, press and hold the to end the call.

Switch Audio Between Cor Audio And Mobile Phone

During a call, press the button to switch the audio source from the car audio
system back to your mobile phone.

www.PyleUSA.com

10

Adjust Call Volume

• During a call, use Volume knob or VOL+/VOL- button to adjust the call
volume level.

• Use the MUTE button to mute sound.

Audio Streaming (A2DP)

The head unit supports A2DP wireless streaming audio from a Wireless BT
mobile device directly to your head unit.

The following functions can be used to control the music:

• Press the button to skip to the next available audio track.

• Press the button to skip to the previous audio track.

• Press the button to toggle between play and pause during music playback.

APP OPERATION

Using the application from PYLE, you can wireless remote control the car audio
of PLCD54MP head unit with Apple & Android devices.

Scan the QR code to download the PYLE Android/IOS App.

Android App IOS App

Connect your smartphone to PLCD54MP through BT, then tap the APP and turn
on it on your smartphone.

Now you can control the audio and the RDS function (Optional) of PLCD54MP
head unit by your smartphone.

www.PyleUSA.com

11

SPECIFICATIONS

Features:

• AM/FM/CD/MP3/USB/AUX Stereo Receiver

• Single DIN

• LCD Display with Remote Control

• CD/MP3 Stereo Receiver System

• AM/FM Stereo Radio, 30 Station Memory

• Wireless BT Audio Ability

• USB Flash Readers

• Aux (3.5mm) Input Connector Jack

• Connect & Stream Audio from External Devices

• MP3 Digital Audio File Playback

• LCD Display Panel

• USB Reader

• Electronic Volume Control (treble, Balance, Fader)

• Memory/Repeat/Random/Intro Play

• Mute/Clock Control

• ID3 Tag Song Readout for Artist Name/Song Title

• RGB Button Control

2 pair RCA Output + 2x Subwoofer

• Equalizer (EQ) Electronic Audio Conguration

• Automatic Memory Preset Store/Scan Mode

• Repeat/Shue Song Functions

• Compatible With XBass, Siri Dialing, Android App, IOS App & Demo Mode

Wireless BT Streaming Connectivity:

• Built-in BT for Wireless Music Streaming

• Built-in Microphone for Hands-Free Calling

• Conveniently Reject/Answer Incoming Calls

• Compatible with All of Your Favorite BT Devices

(iPhone, Androids, Smartphones, iPad, Tablets, etc.)

• Wireless BT Version: BT VERSION 4.2

www.PyleUSA.com

12

Technical Specs:

• Remote Control Battery Operated, Requires (1) Coin-Type Battery

• Battery Type: 3V Lithium Bat. 240mAh Capacity

• Single DIN Universal Size Standard

• Night illumination: RGB

• MAX. Power: 4x75W (300 Watts)

• PLL Electronic Tuning Radio Tuner

• ISO with 4 Pin/8 Pin Wire Connector

• Stereo/Mono Mode Selectable

• Audio Control: Treble/Fader/Balance, No Treble & Bass

• Preset EQ: Flat/Pop/Rock/Class/O

• Switchable USA/Europe Tuner Frequencies by Software

• Max. USB Support: 64GB

• Power: DC 12V

• Current Consumption: 10A

• Product Dimension: 4.5’’ x 7.1’’ x 1.97’’ - inches

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

PRECAUTIONS ON POWER SUPPLY AND SPEAKER CONNECTIONS:

Do not connect the speaker leads of the power cord to the car battery;
otherwise, the unit will be seiously damaged. BEFORE connecting the speaker
leads of the power cord to the speakers, check the speaker wiring in your car.

www.PyleUSA.com

13

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]