Pyle PLCD-18-MRMP Owners manual

PLCD18MRMP

OWNER’S MANUAL

Mobile Audio System

• PLL Synthesizer Stereo Radio

• Digital Compact Disc Player/MP3 Player

• Automatic Memory Storing

• Slide Down Detachable Panel

• Program CD Tracks

• Electronic Shockproof (ESP) Function

• CD Changer Control

• Auxiliary Input Function

www.pyleaudio.com

CONTENTS

Installation .....................................................................................................3

DIN Front-Mount....................................................................................................3

Installing the unit.............................................................................................3

Removing the unit...........................................................................................4

Using the Detachable Front Panel .............................................................5

Wiring Connection ........................................................................................6

Operation .......................................................................................................7

General Operation ..............................................................................................11

Radio Operation .................................................................................................13

CD Operation ......................................................................................................14

CD Changer Operation .......................................................................................15

MP3 Operation ....................................................................................................15

Specification................................................................................................18

Trouble Shooting .........................................................................................19

INSTALLATION

Notes:

• The unit can be installed on the vehicle or the ships.

• Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

• Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle or the ship.

• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

• If installation angel exceeds 30¢Xfrom horizontal, the unit might not give its optimum performance.

TAKE OUT SCREW BEFORE INSTALL

Before install the unit, please remove the two screws.

Take out screws before installation

NOTE: If this unit is installed on the ship, you should use two pieces of plastic film (30mmX20mm) supplied with the unit to seal the two holes after remove the screws. And this will be waterproof.

DIN FRONT-MOUNT

Installing the unit

182

30˚

• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

(Fig. 1)

1. Dashboard

2. Holder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

3. Screw

INSTALLATION

Removing the unit

7 4

(Fig. 2)

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (5x25mm)

5. Screw

6. Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

Front Panel

OPEN button

1. Before removing the unit, press the OPEN button to slide down the front panel.

2. Lever Insert the levers supplied with the unit into the grooves in the housing as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel

1. Press the OPEN button, the front panel will slide down.

Open

2. When the front panel slides down, press the bottom button of the front panel upward and pull it out from the panel bracket.

Bottom

Button

3. For safekeeping, store the front panel in the supplied protective case immediately after being removed.

Protective Case

To Reinstall the Front Panel

1. When the panel bracket is in slide down position, insert the front panel into the panel bracket and push the front panel from the middle to slide it up.

Bottom

Button

2. When the panel bracket is in slide up position, insert a side of the front panel to its proper position and push another side into the panel bracket, a ‘click’ sound should be heard.

Front Panel

3. Note that if the front panel fails to lock in position properly, pressing control button may not function and LCD display may be missing some segments. Press the OPEN button and then re-install the front panel again.

Front Panel

WIRING CONNECTION

ANTENNA SOCKET

IGNITION SWITCH (B+)

MEMORY BACK-UP

GROUND (B–)

POWER ANTENNA

FRONT Lch SPEAKER

REAR Lch SPEAKER

RED

YELLOW

BLACK

BLUE

WHITE

WHITE/BLACK

GREEN

GREEN/BLACK

MAIN UNIT

AUX IN

REAR RCA CABLE

GREY

GREY/BLACK

VIOLET

VIOLET/BLACK

(BLACK)

(YELLOW)

(GREY)

WIRING REMOTE CONNECTOR SOCKET

CD CHANGER CONNECTOR SOCKET

Rch RED

Lch WHITE

Rch RED

Lch WHITE

FRONT Rch SPEAKER

REAR Rch SPEAKER

+ 14 hidden pages