Pyle PLBAS102LE User guide

PLBAS82LE - PLBAS102LE - PLBAS122LE

Active Dual Bass Subwoofer Box System

Rear Vented Design
with Built-in Illuminating LED Lights

WIRING CONNECTION

Power amplier for schematic diagram.

• Positive pole: Connect +12V and Rem. in parallel

• Negative pole: connect to GND

6pin-Power Supply Line

4pin-High input Line Tuner

REMOTE CONTROL FEATURES

1. Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.

2/9. Dynamic Mode button: Switch from dynamic mode to color mode or

switch between dynamic modes.

3/8. Dynamic Mode Speed button: Use these buttons to adjust dynamic mode
speed. If the unit is in static mode, pressing these buttons will switch unit to
dynamic mode.

4/5. Static Color Adjust button: Use this button to swit h between static colors.
Pressing these keys while in dynamic mode will switch the unit to static mode.

6M Connecting Line

6/7. Brightness Adjust button: Pressing these buttons will adjust brightness
while in static mode. If these buttons are pressed while unit is in dynamic mode,
it will switch to static mode.

10. Demo Mode button: This button will switch the unit into demo mode.
While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.

www.PyleUSA.com

PLBAS82LE

8'' Dual Bass Subwoofer Box System

Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs:

• Construction Materials: 15mm Particle Board + Multilayer Board

• Power Rating: 2x400 Watts Max Power

• Voice Coil: 1.5''

• Impedance: 4 Ohms

• Magnet: 2x30 Oz

• Sensitivity: 90 dB

• Frequency Response: 40-1K Hz

• Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries

• Battery Type: 3V Lithium Battery

• Battery Life: Up to 2+ Hours

• Product Dimensions (L x W x H): 25.9'' x 9.0'' x 10.6'' -inches

PLBAS102LE

10'' Dual Bass Subwoofer Box System

Rear Vented Design with Built-in Illuminating LED Lights

Features:

• Built-in Illuminating LED Lights

• Class-D Powered Enclosure Amplier

• Rear Vented Design

• High Powered 8-inch Woofers

with a Silver Paper Cone

• Rubber Edge Suspension

• Smooth Carpet Finish

• 4 Layer Dual Voice Coil

• Binding Post Connectors

• Perfect for Truck and Behind the Seat

• High-Quality Construction

What's in the Box:

• Subwoofer Box

• LED Remote Control

• Output Wire for Amplier

Technical Specs:

• Construction Materials: 15mm Particle Board + Multilayer Board

• Power Rating: 2x500 Watts Max Power

• Voice Coil: 2.0''

• Impedance: 4 Ohms

• Magnet: 2x40 Oz

• Sensitivity: 91 dB

• Frequency Response: 35-600 Hz

• Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries

• Battery Type: 3V Lithium Battery

• Battery Life: Up to 2+ Hours

• Product Dimensions (L x W x H): 30.7'' x 11.8'' x 13.0'' -inches

PLBAS122LE

12'' Dual Bass Subwoofer Box System

Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs:

• Construction Materials: 15mm Particle Board + Multilayer Board

• Power Rating: 2x600 Watts Max Power

• Voice Coil: 2.0''

• Impedance: 4 Ohms

• Magnet: 2x50 Oz

• Sensitivity: 91 dB

• Frequency Response: 30-300 Hz

• Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries

• Battery Type: 3V Lithium Battery

• Battery Life: Up to 2+ Hours

• Product Dimensions (L x W x H): 33.8'' x 12.6'' x 14.9'' -inches

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]

www.PyleUSA.com