Pyle PHSP6K, PHSP8K, PHSP12K User Manual

PHSP6K - PHSP8K - PHSP12K

Indoor/Outdoor PA Horn Speaker

How to use

1. Careful attention should be required to the polarity when more
than two speakers are in operation at the same place, otherwise
the sound of poor quality and/or sound pressure of low level will
be reproduced. Connection should be made in the same way as
in the case of battery, same polarity with parallel con-nection and
dierent polarity with series connection.

2. When long wiring is called for, the low impedance connection
invites large power loss, resulting in inecient operation of
speakers, in case wiring becomes longer than 50 meters, equip
matching transformer and use with proper high impedance.

3. For low impedance connection, the total impedance of speakers should be equal to the output
impedance of amplier.

4. Do not operate the unit for an extended period of time with the sound distorting. This is an
indication of a malfunction, which in turn can cause heat to generate and result in re.

Speaker

Bracket

www.PyleUSA.com

PHSP6K - 6.3”

PHSK8K - 8.1”

PSSK12K - 10”

PHSP6K - 6.1”

PHSK8K - 7.9”

PSSK12K - 9”

Technical Data PHSP6K PHSP8K PHSP12K

Load rating 25W 50W 55W

Nominal impedance 8 ohms 8 ohms 8 ohms

Freaquency range 400Hz-6KHz 400Hz-6KHz 400Hz-5KHz

SPL(@1W/m) 100 dB 103 dB 105 dB

Dimension ØxD (mm) Ø160x155mm Ø206x200mm Ø260x228mm

Material ALU ALU ALU

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]

www.PyleUSA.com