Page 1
High-Fidelity Noise Canceling Headphones
PHPNC85
User Manual
www.PyleAudio.com
Page 2
PHPNC85 - High-Fidelity Active Noise Canceling Headphones
Thank you for purchasing the Pyle High-Fidelity Active Noise Canceling Headphones. These headphones combine the comfort of
traditional high performance headphones with active noise control, reducing the effects of unwanted ambient sounds for the
increased audio and listener experience. Enjoy the headphones when you work, fly or when you just want to relax.
Once the headphones are on, locate the power switch on the right ear-cup and press forward to the ‘ON’ position. The Blue
battery light indicator will illuminate and the noise canceling function is activated. Adjust the levels of noise cancelation using the
HI/LO slider switch found at the base of the right ear-cup.
When the power switch is set to OFF, the noise cancelling function ceases and the unit can be used as a traditional set of
premium headphones.
NOTE: Batteries are required in order for the noise cancellation function to work.
Connecting the Headphones
Open the protective rubber housing situated on the lower side of the
right ear-cup. Gently push the 3.5mm headphone plug all the way into
the connector opening and then connect the headphone cord into the
port of your chosen audio sound system. If the plug on the audio cable
does not fit use the adaptor for 6.3mm ports.
To connect to in-flight entertainment systems equipped with
dual output connectors, use the flight plug adaptor provided.
NOTE: Do not use with airline onboard sound systems under the
following conditions:
• Whenever the cabin crew announces that electronic devices are
prohibited
• When the use of privately owned headphones is prohibited inside the
plane
Page 3
Storing the Headphones
To store the headphones, rotate the ear-cups inward, and then place the headphones in the carry case.
CAUTION: Incorrectly rotating the ear-cups can damage the headphones
Headphones Come with:
• Headphones
• Carrying Case
• Audio cable- 3.5mm
• Audio System adaptor- 3.5mm to 6.3mm
• Airline adaptor
Confirm the presence of all parts and components before use.
Before You Put On Your Headphones
• Remove the headphones from the carry case
• Locate the battery compartment situated in the front shell of the left ear-cup
• Unclip the latch and insert two AAA batteries.
• Close the compartment
NOTE: Batteries are not included.
Inserting Batteries
Opening Battery Compartment
Press down on headband
towards left ear-cup
Gently, pry open
Fitting
Confirm the left/right orientation by the L/R marks on the inside
of the ear-cups/ headband. Then rotate the ear-cups (they swivel
90 degrees). Place the headphones on your head and adjust the
length of the headband for the most comfortable fit. Length of
headband is adjustable to accommodate various head sizes.
Page 4
PHPNC85 - High-Fidelity Active Noise Canceling Headphones
Specifications:
Reduces Ambient Noise By 97%
Ergonomically Designed For Maximum Comfortable Listening Experience
Up To 20dB of Noise Cancellation; Effectively Reduces Aircraft or Subway Engine Noise
Convenient Foldable Swivel Design
Larger 40mm Driver with Clear Sound And Well Defined Bass
Headphone Driver Unit: Open Air
Frequency Response: 30 - 20000 Hz
Speaker Type: 40mm Mylar
Cone Impedance: 32ohm
Noise Reduced Over Frequencies 70 - 1200 Hz
2 X AAA Batteries Required
Cable Length: Detachable 1.0m
1/8” Stereo Mini Plug Compatibility
Connects With 3.5mm Stereo Jack
Sensitivity: (db): 102/mw
30mm Dynamic Closed Type
30HZ-20,000HZ
33 Ohms @ 1K
Included Accessories:
Detachable Audio Cable, 1/4-Inch Stereo-Plug Adapter, Dual-Plug Adapter (For Airplane), Hard Carry Case
Loading...