Pyle PHLSCBT4BK, PHLSCBT4SL, PHLSCBT4WT, PHLSCBT4PN, PHLSCBT4GN User guide

Thank you for choosing this Bluetooth 4.0 Electronic Body Fat and
Hydration Scale. To ensure proper operation and to maintain the lifespan and
the utmost accuracy of t he scale, pl ease read this manual ca re fully before us e.

Read this Instruction Manual carefully and keep it for future reference.

Key features

♦ This unit automatically pairs with the Pyle Health app. There is no need to

pair with your Bluetooth device.

♦ Bluetooth 4.0 compatible
♦ This product adopts advanced BIA ( Bioelectrical Impedanc e Analysis )

technology to measure body fat, hydration, muscle and bone percentage

by sending a safe low-tension electric current through the body and the

difference o f electrical cond uctive pr operty of body fat from other tissues is

analyzed and processed by the CPU to get the body component

percentage, then the results are displayed on the LCD screen to offer you

reference.

♦ It also displays BMI p a r amet er, and other reference data.
♦ High precision strain gauge sensor system ensures more accurate

weighing results.
♦ Tempered glass platform of high quality and modern desi gn makes the

scale safe and fashionable.
♦ Memory function stores up to 10 persons' information, offering you more

convenience in daily use.

♦ Capacity:4.4 lbs – 330.7 lbs
♦ Division: 0.22 lbs
♦ Auto zero & Auto off
♦ Low battery and over load indication
♦ Freely switch between three different units: kg/lb/st
♦ Powered by 4X1.5V AAA batteries (Included)

♦ To change units from Kg. to lbs. please look underneath the

scale and you will find a plastic button that changes units

♦ About Buttons

SET key: Power on, me nu select and confirm

▲Key: Up
▼Key: Down

LCD Display

Preparations before use

● Find the two lithium cell in the packet and the battery holder at the back of
the scale, open the cover, install the battery into the holder and cover it back.

● Place the scale on hard and flat surface. Clean floor is best.

Setup Procedures
Installation

Prior to first use, Download and install "Pyle Health" applicat ion to your iOS device.
(Bluetooth 4.0 capa bi lities, e. g. iPhone 4S, iPhone 5, NewiPad and i PadMini)

QUICK START GUIDE

Bluetooth connection:

1. You do not need to search and pair for this scale prior to using it. It will

automatically pair with the Pyle Health app.

iOS device (Turn Bluetooth "On" under the "Settings" menu on the iOS device)

2.

3. Open "Pyle Health" application, and then press the Weight icon on the

Measure screen.

4. When the measurement is complete, the weight, body fat, hydration, muscle and

bone percentage will display on the scale & save on the iOS application screen.

After, check the measurement history on the History screen or chart screen in the
iOS application.

For Weight only

● Step on the scale gently and it will activate itself. W hen the screen shows
"0.0kg" after the full display, you can press the scale back key to switch within
different units(kg/lb/st)

● Step on the scale gently, position your feet evenly near the center and keep
your body still and erect until the scale stabilizes your weight. The scale will
automatically turn off when it is not in use for an extended period of time.

For weight, body fat, hydration, muscle a nd bone percenta ge :

Press the "SET" key f or a few seconds to set your personal data. Press “▲”or
“▼” key to select a number from P0 to P9 as your personal code. When the
code number flashes on the screen and you reach your target number, please
press "SET" to confirm.

● Press “▲”or “▼” to choose Male or Female, when the
gender symbol flashes on the screen and then press “SET” to confirm.

● Press “▲”or “▼” to reach your target age (10-80), when "age" and the
number flash on the screen and then press "SET" to confirm.

● Press “▲”or “▼” to reach your target height (100-240cm) when the
number and "cm" flash on the screen and then press “SET” to confirm.

● You must cycle through the user numbers P0 P1 P2 until you get to your
user number and only then will it display readings other than weight.
Step on the scale gently and keep your bare feet in touch with the
electrodes. Stand still and erect to g et y our w ei ght me asure d an d y our body
fat, hydration, muscle and bone percentage will be displayed respectively
on the screen within seconds. These results will be repeated for two times
and the scale will be automatically turn off if not in use.

● The personal data will be stored once you set it. Just confirm your code
when you use t he sca le again and your other i nfor m ati on will be shown too.
There is no need to program them again.

2.5 Body hydration rate normal/ parameter

Because of differences in geographic areas and locations, the body fat
percentage standards and percentage standards can vary. This sheet is for

reference only.

Please remember your personal P number. You do not need to reprogram the
personal P number the next time you use scale. You can use the personal key
you have already stored. You must cycle through the user numbers P0 P1 P2
until you get to your user number and only then will it display readings other
than weight.

Caution

1. People with pacemakers should NOT use this product.

2. People with metal implants will be unable to obtain accurate readings.

3. To ensure accuracy, we suggest using the scale at the same time every

night (19:00-21:00).

4. T he “Errr” on scale display indicates overload. “Err2” display indicates fat

percentage measur e m ent err or.

5. If body fat percentage is less than 5%, indicator displays “FATL”

If more than 50% indicator displays “FATH” If impedance
measuring makes an error, indicator will display “Err2”.

6. The "ERR" display on iOS application

screen indicates the measurement error.

INSTALLING THE BATTERIES

● Use 4 x AAA batteries.

● When changing the batter ies, pl ease ope n the battery cover on the back. Put

4 x AAA batteries in the battery case (Ensure proper polarity), then close
the battery cover tight.

Note

1. The scale shoul d be place d on a flat, clean surface before use.

2. Do not place scale on wet, severely hot, or extremely cold surfaces.

3. Do not jump or stomp on scale. Do not attempt to disassemble the scale.

4. Do not wear shoes when standing on the scale to avoid wearing out the

glass and electrodes.

5. Never submerge the unit in water. Use alcohol to clean the electrodes and

glass cleaner to keep them shiny, applied to a cloth first; avoid soaps.

6. For home use only. Not for professional use. Body fat percentage and

hydration percentage is reference only. You should consult a doctor when
you undertake any diet or exercise program.

7. Check the battery if the scale malfunctions. If necessary, install a new

battery. For other problems, please contact your local dealer or contact
Pyle for repair