Page 1
PHLSCBT2
Bluetooth Digital Weight Scale
Page 2
Thank you for choosing this Bluetooth 4.0 Electronic Scale. To ensure
proper operation and to maintain the lifespan and the utmost accuracy of the
scale, please read this manual carefully before use.
Read this Instruction Manual carefully and keep it for future reference.
Key features
♦ This unit automatically pairs with the Pyle Health app. There is no need to
pair with your Bluetooth device.
♦ Bluetooth 4.0 compatible
♦ High precision strain gauge sensor system ensures more accurate
weighing results, then the results are di spl ayed on the LCD scr een to offer
you reference.
♦ Tempered glass platform of high quality and modern design makes the
scale safe and fashionable.
♦ Capacity:4.4 lbs – 330.7 lbs
♦ Division: 0.22 lbs
♦ Auto zero & Auto off
♦ Low battery and over load indication
♦ Freely switch between three different units: kg/lb/st
♦ Powered by 4X1.5V AAA batteries (Included)
♦ To change units from Kg. to lbs. please look underneath the
scale and you will find a plastic button that changes units
Page 3
LO
Err
Weighing Steps
1. If it is the first time to use the scale , please take out 4*AAA batteries from
insulation sheet, open the battery cover at the back of the scale. Put the 4*AAA
batteries into the scale, and then close the cover.
2. Make sure to place scale on the flat solid floor (no Carpet).
3. Stand on the center of the weighing platform and keep still, LCD will show the
resulting weight.
4. When you are finished step off of scale.
5. Scale will auto power off within 15 seconds after the weighing result is stable
W a rn in g ind ic at i on
LCD display means overload.
LO means power not enough.
• Scale Wirelessly Sends Data to Your Device
• Download the 'Pyle Health' Application to your Smartphone and Track Your Health
• Your Bluetooth device must have Bluetooth version 4.0 or better
• Application Supports iPhones 5, iPads, and iPad Mini (Compatible with iOS 6 &
Later)
• Also Supports Android Samsung Galaxy S4, Nexus 7 (Compatible with Android 4.3
& Later) Must have Bluetooth 4.0 or later
Page 4
Bluetooth connection:
1. You do not need
automatically pair with the Pyle Health app.
iOS or Android device (Turn Bluetooth "On" under the "Settings" menu on the iOS
2.
or Android device)
3. Open "Pyle Health" application, and then press the Weight icon on the
Measure screen.
4. When the measurement is complete, the weight will display on t he scale & save
on the iOS or Android application screen.
to search and pair for this scale prior to using it. It will
After, you can check the measurement history on the History screen or chart
screen in the iOS and Android application.
Attention
1. Capacity: 4.4 lbs – 330.7 lbs, Please weigh within this scope, otherwise, the
sensor will be damaged.
2. Do not put anything on the glass after weighing, or will shorten the life of battery.
3. Only for body weight measure, do not use elsewhere.
4. Do not use chemical detergent for cleaning, soft cloth will work.
5. Please stand on the center of t he scale, keep your feet and the pl atform s urf ace dry,
avoid slipping or falling down.
6. Do not put the scale on rough floor or carpet for weighing, otherwise, the
measured result will not precise.
7. Keep the scale from becoming wet, or exposing to extreme hot and cold places.
8. Do not jump or rough stomp on scale, not attempt to disassemble.
9. If unit stops working, please check whether batteries are inserted properly or
replace battery, or contact Pyle support. support@pyleaudio.com.
Loading...