Page 1
Thanks for choosing this sound deadener and vibration damper
1.Open the packing you will find a roll of the sound deadener
2.Open the roll of the product and cut to the size you need.
3.Take away the back layer so you can see and feel the glue.
4.Stick it on the position you need, you can get more information or help from the car sound
engineer or decoration shop or on line about the best position to reduce the noise and vibration
and improve the sound. Different car or truck has different ways and position.
*Be careful of not damage your car when you dismantle the car......
5.Use a roller to roll the front of the foam for best effect and durability
*Roller and cutter are not included.
Loading...